RSS

Can Weeds Grow in Water?

WP Law - Wednesday, September 22, 2021
repair

Can weeds grow in water? If you have a fountain or water feature, you might already know the answer. Here’s what to know about weeds, water, and what to do about them.

How Can Weeds Grow in Water?

Weeds only need three things to thrive – water, sunshine, and nutrition. Usually, weeds get all these things by growing in soil, usually in your lawn and garden where you don’t want them. But they can also grow in water, depending on the environment.

The Problem with Weeds in Water

Weeds that grow in water can clog your drains and pumping systems. If you have fish or koi, they can endanger them as well as other wildlife. They can also spread to other areas and cause immense damage to waterways, rivers, and lakes, and the fish and animals that depend on them for survival.

How to Control Weeds in Your Water Feature

There are several methods for controlling weeds in the water. These are the most effective:

  • Remove them manually – pull them up from the bottom if you have a shallow enough water feature to do so
  • Install weed barriers – these prevent sunlight from reaching the bottom of the pool, so weeds won’t take root
  • Use an herbicide – this will kill any existing weeds
  • If you have weeds in your water, you know what a pain they can be. But getting them under control is critical to the health of your water garden. For more help controlling the weeds, you find in your water, contact W.P. Law for their expert guidance.

    How Do I Know Which Grass Type is Right for Me?

    WP Law - Wednesday, September 01, 2021
    repair

    The climate in South Carolina is ideal for creating a lush, green lawn if you choose the proper grass. But, with so many options, how do you know what’s right for you? First, take a look at a guide to grasses that will thrive in South Carolina.

    Zoysia

    Zoysia exhibits good shade and wear tolerance and is an excellent choice for a lawn with varying levels of sunlight. Proper irrigation practices are essential in Zosia to help prevent patch disease.

    Tall Fescue

    Fescue is a cool season grass. It is dark and fine-bladed and looks great when first planted. However, it can thin out over time, especially if there’s a particularly dry season, so it often requires reseeding each fall.

    Bermuda

    Bermuda grass comes in quickly once seeded, and it loves the heat of the south. Because it’s forgiving when it comes to salty air and soil, it does well in the coastal regions. However, it doesn’t love the shade and can appear thinner if you have a particularly shady yard.

    Centipede

    Centipede grass is low maintenance, requiring minimal mowing. It’s one of the most common types of grass used in lawns in South Carolina because it does well in our southern climate and tolerates some shade.

    St. Augustine

    St. Augustine grass is also known as Charleston grass due to its resiliency in the salty climate by the coast. It loves the hot temperatures and humidity in that part of the state but will thrive in semi-shady areas. It grows fast but is low maintenance.

    If you’re still unsure about which direction to go for your lawn and garden, the pros are standing by to help. Contact the team at W.P. Law today for expert guidance on all your landscaping needs.

    What No One Tells You About Drainage Systems

    WP Law - Wednesday, August 11, 2021
    repair

    Water runoff management requires adequate drainage systems. Does your property have excess water that doesn’t seem to go anywhere, especially after it rains? You might not have the right drainage system in place. Here’s what you need to know.

    Surface Drainage

    Whether at your home or a commercial property, you need to be able to manage water. Standing water poses many risks, including slip hazards, property damage, and breeding grounds for pests such as mosquitoes. It can be on driveways, walkways, or even in landscaped areas. Surface drain systems take the excess water and runoff and direct it from the surface to underground pipes and catch basins.

    The Right Size Drainage System

    Something not everyone understands is how to determine the size of the drains required and the size of the catch basins. Before installation, it’s critical to determine the amount of water for the right materials, sizing, and installation.

    Types of Drains

    There are two primary drain types are used depending on the location and need at your property. They include:

    • Catch basins – this type of drainage allows excess water that gathers in landscaped areas to move away from the foundation as well as the flowers, trees, shrubs, and grass to protect them from damage.
    • Channel drains – installed in hard surfaces instead of in soil and dirt, channel drains help remove water in places like driveways, patios, and walkways.

    Whatever your drainage needs, it’s critical to hire the right professional. The team at W.P. Law, Inc. has the knowledge and experience to get the job done right. Contact them today.

    Why Mother Nature & Your Wallet will Love Irrigation Systems

    WP Law - Wednesday, August 04, 2021
    repair

    Are you on the fence about installing an irrigation system? Some benefits might convince you it’s worth the investment. Take a look at why Mother Nature and your wallet will love a sprinkler system for your lawn and landscaping.

    The Convenience

    If you’ve been dragging a hose and sprinkler around your lawn and garden, you know how much of a pain that is. An irrigation system, on the other hand, is the epitome of convenience. You can program it to water when you want, including the number of days that work for you. No more tracking how long the hose was on any given spot. Your time is valuable, and you can spend it doing something else once you have an irrigation system.

    The Health of Your Landscaping

    Regular irrigation means no dead spots, drooping flowers, suffering shrubbery, or lackluster trees. Instead, your lawn and garden will look their best when your irrigation system is up and running regularly.

    The Savings for Your Wallet

    You’ll use less water and save more money with an irrigation system. Using a hose and manual sprinklers actually uses more water than a programmed sprinkler system. And the latest technology has rain sensors to put watering on pause when Mother Nature steps in to take care of the irrigation.

    If you don’t have an irrigation system for your yard, now’s the time to change that. Find out everything you need to know about how it can benefit you and your wallet by contacting W.P. Law, Inc. today.

    Upgrade the Look and Feel of Your Backyard with a Pondless Waterfall

    WP Law - Wednesday, July 14, 2021
    repair

    Are you exploring the benefits of installing a pondless waterfall? If you are ready to upgrade your backyard, you’ll find this type of waterscape system creates an attractive focal point for the space. Keep reading to learn more about how a pondless waterfall feature will help you get more enjoyment out of the moments you spend outside.

    What Is a Pondless Waterfall Feature?

    A pondless waterfall is a waterscape system that includes a water reservoir, recirculating pump, and stone or rocks through which the cascading water flows. The water will trickle or gush before going through the stone base covering the reservoir, disappearing, and continuing the cycle. Some people use the term “disappearing pond,” but either way, there is no open pond that catches the cascade. The water recirculates endlessly, creating a continuous waterfall to enjoy.

    What Are the Benefits of a Pondless Waterfall?

    Many homeowners are discovering that the pondless waterfall is an effective way to turn a section of the backyard into a bubbling, relaxing oasis. Here are some of the benefits that make this type of waterfall an excellent choice to enhance your backyard:

    • Brings texture and a point of interest to your landscaping
    • Drowns out the unpleasant noise in the neighborhood with the soothing sound of water
    • Waterfall installation is suitable for any spot you want to add something special
    • A wide range of styles means you can have an elaborate or simple waterfall design
    • No need to mess with fish
    • Virtually maintenance-free
    • Energy-efficient

    Ready to transform the look and feel of your backyard? Get in touch with the team at W.P. Law, Inc. to learn more about our pondless waterfall feature kits. Let our friendly experts help you find the waterfall design to bring more beauty and enjoyment to your backyard space.

    The Do’s and Don’ts of Outdoor Garden Ponds

    WP Law - Wednesday, July 07, 2021
    repair

    Outdoor garden ponds add beauty and tranquility to your residential or commercial outdoor spaces. If you are thinking about upgrading your landscaping, an outdoor pond may become a potential water feature option. However, it’s vital to have a complete understanding of what you should and should not do as you move forward with installation. Keep reading for three do’s and don’ts of installing an outdoor garden pond.

    1. Arranging Pond Stones

    2. Do: Include stones of varying shapes and sizes to create a natural look, and arrange them to avoid low spots that can cause leaks.

      Don’t: Include sharp or coarse stones with rough or jagged edges. Sharp rocks can puncture the pond lining.

    3. Creating the Right Pond Dimensions

    4. Do: Build the pond basin to be deep enough to keep fish safe during the colder months.

      Don’t: Position the pond near the lowest points in the yard, as this will lead to runoff issues.

    5. Dealing with Bugs

    6. Do: Ensure the pond and surrounding area is clean by removing standing water where mosquitos can thrive. Also, keep the water in the pond moving to avoid stagnant water, which attracts bugs.

      Don’t: Use insecticides in or around the pond.

    Contact W.P. Law, Inc. today to find out how we can help with your pond.

    Surprising Ways Water Features Can Enhance Your Life

    WP Law - Wednesday, June 16, 2021
    repair

    Water features may be exactly what your lawn needs this season. When you look at your home's lawn and landscaping, what kinds of feelings do they evoke? What if you could enjoy a yard that facilitates joy, serenity, and relaxation? You may be surprised to learn how installing the right water features can make you fall in love with your lawn like never before. Keep reading for three surprising ways water features not only beautify your property but also enhance your life!

    1. Calming Sounds
    2. Whether you install an outdoor fountain, a waterfall, or a pond, the sound of water will soothe and relax you after a stressful day. Moving or falling water creates repetitive, ambient sounds that provide a sense of tranquility. The sound may even drown out unwanted or unpleasant noises in the neighborhood that tend to disturb you during times of rest. Taking a nap in a hammock near your water feature is better than any calming sounds app you can find!

    3. Relaxing Ambiance
    4. Life can be stressful, and you may lack space in your yard where you can truly unwind and recuperate from daily life. Water features deliver the total package to create a relaxing ambiance that sweeps you away from the stresses and chaos of the world around you. In addition to listening to calming sounds, observing water fall or trickle or create puddles takes your relaxation to the next level. You may also add fish to your pond or watch birds bathing in your birdbath fountains to create a mesmerizing environment.

    5. Peaceful Meditation
    6. Have you always wanted to incorporate meditation and mindfulness into your health and wellness practices? Installing water features is a great place to begin. You'll find that fountains, ponds, and waterfalls help you achieve the calm, focused mind and serene spirit to get even more out of your meditation sessions, whether you are a beginner or have been meditating for years.

    If you are ready to find out which water features are right for your property, contact the team at WP Law, Inc. today. We are here to help you choose and install the water features that will enhance your life while making your lawn look beautiful.

    3 Key First Steps to an Irrigation System

    WP Law - Wednesday, May 05, 2021
    repair

    Whether you need better irrigation for your landscaping, sports facility, or agricultural application, it's essential to set up your irrigation system for success. If this is your first time installing irrigation, you want to make sure you do it correctly for optimal results. Keep reading for the three key first steps to an irrigation system:

    1. Choose Your Irrigation System Design Wisely

    2. Proper irrigation system design is the most important step to take when setting up irrigation for the first time. If the design is wrong, you will likely struggle with repair needs and issues in the future. Getting the right design will help you make the most of your system investment. If you aren't how to design the system correctly, reach out to the professionals for hassle-free and expert design.

    3. Invest in High-Quality Irrigation Equipment

    4. When it comes to irrigation systems, you get what you pay for! Now is not the time to go the cheapest route. However, it is possible to get affordable irrigation equipment to meet your needs and budget. Don’t be afraid to shop around to compare prices. Ultimately, getting a professional recommendation from irrigation experts will help you make the best choices.

    5. Follow All Installation Guidelines

    6. The people who tend to be disappointed with their irrigation system performance often tried to set it up without following installation guidelines. Any equipment you purchase should come with step-by-step instructions, and it is crucial to follow them carefully. For best results, turn to experienced irrigation system professionals for your installation.

    For a streamlined irrigation system installation, turn to the irrigation design specialists at W.P. Law, Inc. We bring years of experience to your project and use only top-quality equipment and materials. Connect with W.P. Law, Inc. online now to schedule services and receive recommendations.

    Manual Vs. Automatic Irrigation Systems: What’s Right for Me?

    WP Law - Wednesday, March 17, 2021
    repair

    Considering the differences between manual vs. automatic irrigation systems is worthwhile when your goal is to facilitate beautiful and attractive landscaping for your property. Keep reading to learn the differences between these two methods and how you can know which is right for your irrigation application.

    What Is a Manual Irrigation System?

    A manual irrigation system involves hand watering with hoses, nozzles, or sprinklers. While using these products tends to cost less money than installing an automatic system, it requires significantly more time as you will need to operate the equipment yourself.

    You either must be present to move the hose and sprinkler frequently to cover the entire area or install a timer feature for multiple hoses and sprinklers. Manual irrigation is not ideal for the purpose of watering large properties or different areas on your property.

    What Is an Automatic Irrigation System?

    An automatic irrigation system involves in-ground, clock-driven sprinklers that can run without human operation. The automatic system is ideal for large properties or when the homeowner travels or is unavailable to provide the necessary manual watering.

    An automatic irrigation system can also a very efficient and cost-effective option. These systems are typically used in conjunction with a rain and freeze sensor. Unnecessary watering can also be controlled by a smart controller. This device uses weather sensors and soil moisture sensors to apply the proper amount of water to the landscape.

    Turn to WP Law for the Ideal Irrigation System for Your Property

    From overhead agricultural irrigation and drip irrigation to irrigation systems for homeowners and landscaping professionals, WP Law can help you determine which system is right for you. To get started with a new irrigation system or to learn more about manual vs. automatic irrigation systems, connect with WP Law, Inc. now.

    3 Important elements of DIY Irrigation System Installations

    WP Law - Wednesday, March 10, 2021
    repair

    DIY irrigation system installations are not an impossible task, but it's essential to consider the risks and complexities involved in doing it yourself. When you are committed to getting the job done right the first time, take into consideration the following tips:

    #1: Mapping It Out!

    It is important to take time to plan your installation. Mapping out your design will allow you to plan the layout of your landscape that conserves both work and water. This will help you see what irrigation supplies you will need. It will also show you where irrigation can be moved to later if you decide to expand.

    #2 :Dangerous Digging

    Anytime you begin digging on your property, there’s a dangerous risk of hitting electric, gas, or cable lines. While hitting a cable line may only cause you to lose cable for a few days, hitting a gas or electric line can have dire, life-threatening consequences. To stay on the safer side, call 811 to come locate all utilities before you dig. To stay on the safest side possible, hire a professional to handle the task for you.

    #3: Damaging Tree Roots

    If you have trees on your property, you may be surprised to discover that tree roots can be expansive underground. Once you start digging, it’s easy to sever or damage the roots, which can lead to sick or dead trees. Furthermore, improper placement of the irrigation system pipeline can mean that the tree roots interfere with future irrigation. To avoid both of these scenarios, work with an irrigation specialist who knows how to work around tree roots to keep your property safe and beautiful.

    Avoid the Common DIY Installation Hassles by Using A Reputable Irrigation Professional

    Irrigation professionals have extensive resources and industry networks. They can coordinate with suppliers to help provide the best materials. They also have sustainable solutions to your landscaping problems. Their experience can provide insight into avoiding common roadblocks.

    At WP Law, we specialize in irrigation system design whether you need irrigation for landscaping, agricultural applications, sports facilities, or your residential property. Our irrigation experts can offer unique solutions to your problems, regardless of your level of experience. Reach out to our irrigation experts today to get started.

    4 Important Questions to Ask Your Irrigation Expert Before Buying

    WP Law - Thursday, February 25, 2021
    expert

    Are you getting ready to invest in an irrigation system? Ask your irrigation expert these four questions before you hand over your money.

    Question #1: Are you Licensed?

    You wouldn’t work with a roofing company or plumbing company that isn’t licensed, so you shouldn’t work with an irrigation pro that isn’t. Not only does a license protect you from potential issues, it helps ensure you’re working with an experienced and knowledgeable professional.

    Question #2: What Water Conservation Products Do You Use?

    With an emphasis on responsible water use, it’s important to know how your irrigation design ensures water conservation. It affects not just the planet but also you and your water bill.

    Question #3: What is Your Experience?

    Lots of people can pass themselves off as irrigation experts when in reality, they’re weekend DIYers. Make sure you know what their experience is before signing on the dotted line. They should have at least five years of installation experience in a variety of irrigation systems. Ask for references and follow up on them. You’ll be glad you did.

    Question #4: What’s Your Experience with My Type of System?

    A commercial expert might not be savvy in residential irrigation, and vice versa. Find out about their experience with the type of system you need. You don’t want to be a guinea pig as they experiment with a different type of installation.

    Licensed irrigation designers at W.P. Law, Inc have over 50 years of experience in the business with numerous systems. Contact us today to find out more on how we can help.

    Pros and Cons: Is A Residential Irrigation System Actually Worth the Money?

    WP Law - Thursday, February 18, 2021
    irrigation

    A residential irrigation system might seem like a no-brainer, but before you jump in, you want to gather the information. Here’s a handy list of pros and cons to help you decide if it’s actually worth the money.

    Start with the Pros

    • Convenience – nothing is more convenient when watering your grass and landscaping than an irrigation system - no more dead spots or hauling hoses and sprinklers around the yard. Automation means you can set it and forget it and know your entire lawn will get the water it needs when it needs it.
    • Cost Savings – you’ll use less water when you have an irrigation system set on a timer. You’ll never waste water or have higher water bills because someone forgot to turn off the hose.
    • Resale value – an irrigation system boosts the resale value of your home as much as any other upgrade.

    A Look at the Cons

    • Initial cost – the initial cost of installation might be a deterrent for some homeowners. Irrigation systems pay for themselves over time with savings on your water bill and increased home value.
    • Installation process – the installation process can seem daunting. Because an irrigation system lies underground, your yard will undergo some digging to install the piping.

    While there are pros and cons to anything in life, when we’re talking about a residential irrigation system, the benefits far outweigh the drawbacks. To find out more, contact the experienced professionals at W.P. Law, Inc. today.

    Does It Really Matter Which Irrigation System You Use on Your Sports Field?

    WP Law - Thursday, January 28, 2021
    system

    We're about to answer the question of the ages regarding sports field irrigation. It's a topic of discussion among grounds professionals everywhere. Keep reading because we're about to tell you why the irrigation system you use for your sports field really does matter.

    Consistent Play

    The number one priority when it comes to sports field surfaces is consistency during play. Lumps, bumps, holes, and dead or burned grass all affect the players' performance who use the space safely.

    The Look of the Field

    No one wants to play on a dry, brown, dead surface. Whether it's golf, baseball, football, soccer, or any other sport played on grass, you want them wowed by the sea of green when people come to your field. And, even more important, you want them to remember the excellent conditions.

    Why Irrigation Matters

    Unless you want to switch to artificial turf, you must prioritize irrigation strategies. Every field is different, and each faces its own challenges, including water accessibility, pressure, and weather conditions. When you want to take care of your grass, you need to know which system is best for which type of field you have. Do you need extended radius sprinklers for a football field? Could your infield benefit from mid-range rotors? What about a traveling system for situations where underground irrigation isn't possible? Whatever your needs are, irrigation is the key to a healthy, consistent playing surface.

    No matter what type of sports field you have, you need a team of experts to get you the right irrigation system to keep it in great shape. The team at W.P. Law, Incorporated has got you covered. Contact them today for all of your sports field irrigation needs.

    2 Costly Effects of Improper Drainage Systems

    WP Law - Wednesday, January 27, 2021
    system

    Drainage systems are a key component of any property. Whether it’s an athletic field, farm land, commercial property or residence, expensive issues can arise if the drainage system fails. Not convinced? Take a look at two costly effects of improper drainage systems.

    #1: Flooding

    No one wants field or lawn flooding. If your drainage system isn’t installed properly or isn’t functioning as it should, you’ll surely have flooding sooner or later. Flooding on an athletic field or surface means that surface is unusable until the water recedes and can leave damaged turf behind. Flooded agricultural fields lead to damaged crops and lost income now and potentially into the future. Excess water from lack of drainage at a residence can mean a flooded basement, a potentially damaged house foundation, or the loss of grass and other plantings.

    #2: Erosion

    Water that is not properly collected and channeled can lead to severe surface erosion. Collecting water from downspouts and driveways and holding in on-site in a Flo-Well® reduces the environmental impact on our lakes, rivers, and streams. Protecting these ecosystems from contaminants and the silt produced from excessive runoff leads to a better quality of life for all of us.

    Protect your home and the environment by making sure your drainage system is up to par. For drainage and irrigation systems you can rely on, contact W.P. Law, Inc.

    3 Costly Fertilizer Mistakes Damaging Your Lawn

    WP Law - Thursday, January 07, 2021
    moving mistakes

    Homeowners know that one great way to take care of a healthy lawn is with fertilizer treatment. But can there be too much of a good thing? It's true that not all fertilizer applications have a happy ending. Here are three costly mistakes that could damage your lawn.

    #1: Too Much of a Good Thing

    Sometimes when it comes to your lawn, less is more. Too much fertilizer can lead to the opposite of a healthy, lush lawn. If the application is too heavy, you'll end up with burned roots, grass that is vulnerable to pests and disease, and you could even end up with dead spots where you were hoping for green ones. Use a light hand with fertilizer to avoid these issues.

    #2: Missed Timing

    An important factor in lawn care is proper timing with the nutrients found in fertilizer. Too close together, and you risk over-fertilizing. Too far apart, and your lawn won't get the benefits. Be careful not to fertilize too early in the spring, either. Many a lawn has had lush, tender new growth damaged by a late frost. It is usually best not to fertilize warm season grasses until the night time temperature is 70 degrees.

    #3: Trying to DIY It

    Landscaping professionals are pros for a reason – they have the knowledge and experience to manage lawn care and get optimum results. When it comes to fertilizer and other lawn treatments, they know what works, what doesn't, and your specific grass and soil needs. Handing it over to the experts is one way to avoid costly fertilizer issues.

    If you're ready to have the greenest grass on the block, trust your lawn care to the team at W.P. Law, Incorporated by contacting them today.

    Is Artificial Turf Right for Me?

    WP Law - Thursday, December 17, 2020
    turf

    It seems like lots of people are turning to artificial turf for backyard landscaping and athletic field footing these days but is it right for you? Before you tear up your lawn and roll out the turf, take a look at the good and the bad when it comes to artificial grass.

    Pros of Artificial Turf

    Artificial turf is popping up all over the place, from your next-door neighbor’s lawn to the turf on the community baseball fields. There are some good reasons for its popularity, including:

    • It’s low-maintenance – no mowing, weeding, trimming, or fertilizing required with artificial grass
    • It’s always green – whether you love a nice, green lawn year-round or an athletic field that looks great no matter the weather, artificial turf stays green
    • Saves water – real grass requires massive amounts of water just to keep it alive, while turf is water-free

    Cons of Artificial Turf

    You can’t deny the increase in turf popularity, not just for sports and recreation spaces, but also for lawns and backyards. But it’s not without its drawbacks. They include:

    • Cost – the initial installation of turf is expensive, averaging between $10 and $20 per square foot
    • Heat – artificial turf can get extremely hot during the summer months, making it impossible to walk on barefoot and miserable to play on during the day
    • Not eco-friendly – while turf can save water and fuel to maintain, it can negatively affect the biodiversity, including the natural water run-off
    • It can be unsanitary- Without proper maintenance there can be a slight risk for infection. It can also possibly retain moisture which can hold harmful bacteria.

    Instead of investing in costly artificial turf that may or may not meet your expectation, and that might just get too hot to enjoy, consider natural grass instead. The team at W.P. Law, Inc. can talk to you about the pros and cons of each when you contact them today.

    The Big Differences Between a Do it Yourself-er and a Landscape Professional

    WP Law - Thursday, December 03, 2020
    landscape

    There are lots of weekend warriors out there trying to tackle landscaping projects Is this the right path for you? Before you hit the big-box store and start digging up the dirt, take a look at the two big differences between do-it-yourself-ers and professional landscapers.

    #1: Tools and Expertise

    How hard could it be to install some sprinklers, lay some sod, and plant some trees? In reality, those tasks are more challenging than you might think. The biggest advantages professional landscapers have over a homeowner considering a DIY project are their tools and expertise. You might end up spending more money just buying the right tools than you would pay a professional to do the job for you. In addition, a professional landscaper also has access to higher quality materials. Using them the right way to install plants and trees properly are the keys to your project’s success.

    #2: The Work and Labor

    A lot of work goes into landscaping, from the initial design to installation. While it seems like it’s something you could do over a few weekends, imagine the physical toll it could take on you, especially if you don’t have the right equipment to ease the process. Instead of spending your free time every weekend digging and hauling and planting, let the pros handle the job. They’ll get it done expertly and quickly.

    We appreciate your can-do attitude when it comes to DIY projects! Be sure to contact the team at W.P. Law, Inc., to help you navigate all those landscaping and irrigation questions.

    3 Landscaping Certifications You Should Know About

    WP Law - Thursday, October 22, 2020
    moving mistakes

    If you need pump repair and fabrication, who are you going to call? Do you want to pick someone off a Google search and hope for the best? When you need an experienced professional, it’s critical to go with a certified professional who can manage the work you need done. Take a look at three landscaping certifications you should know about.

    1: CIT– Certified Irrigation Technician

    If you have an electrical irrigation system, this is your guy. With training that teaches advanced troubleshooting and skills related to electric-driven irrigation systems, a CIT has hands-on training that prepares them for equipment repair in the field.

    2: Certified Landscape Irrigation Technician, Designer, and Water Manager

    This area of certification starts with techs who are responsible for installing, repairing, and maintaining a variety of irrigation systems. It moves up to an irrigation system designer who designs and engineers specialty irrigation projects. Finally, a Certified Water Manager works to improve irrigation systems to make them as efficient as possible.

    3: LIC - Landscape Industry Certified

    This is a general industry certification that recognizes professionals who pass an exam and become recognized by the National Association of Landscape Professionals. Like most certification programs, the LIC requires hours of training and experience to prepare for the exam and to qualify for the certificate.

    If you need any type of landscaping work from a basic sprinkler system to pump repair and fabrication, don’t give your business to just anyone. Using a certified landscaper will help ensure experienced technicians and quality workmanship. For more information contact the professionals at W.P. Law, Inc.

    Beginner’s Guide to Lawn Fertilizer and Chemical Treatments

    WP Law - Thursday, September 10, 2020
    lawn

    Are you using the right lawn fertilizer and chemical treatments? You love your lawn, take good care of it, and want it to look good year-round. But if you aren’t using the right products at the right times, you could end up with less than stellar results. If you’re new to the fertilizer and chemical treatments game, we’re here to help with a guide for beginners.

    What is Fertilizer?

    Fertilizer is food for your lawn. It’s made of either organic or inorganic materials. You apply it directly to your lawn, and it gets into the soil to nourish the grass. There are three main components of fertilizer, known as NPK – nitrogen, phosphorus, and potassium. These are found in the soil that keep your grass alive. Adding supplemental amounts in fertilizer keeps the grass healthy when the soil can’t support it on its own.

    What Do Chemical Treatments Do?

    In addition to fertilizer, your lawn often needs extra care in the form of chemical treatments. These can treat everything from insects and infestations to fungus and diseases. We don’t recommend that you diagnose and treat your own lawn issues. You don’t want to do more harm than good.

    You want your lawn to look good and be healthy all year. Our team is here to help you do just that. With our expertise in fertilizer and chemical treatments, we can help you have a lush, green lawn. Contact W.P. Law, Inc. today to find out more.

    How Long Should I Keep My Irrigation System Running into the Fall?

    WP Law - Thursday, September 03, 2020
    system

    Have you turned off your irrigation system now that fall is nearly upon us? We hope not! The weather in the south means you can water well into the autumn months. But is there a point when you should stop? Here’s what you need to know about running your irrigation system into the fall.

    Winter and Proper Irrigation

    The ground doesn’t freeze in the south the way it does in northern states. There, you need to shut off and drain your irrigation system to prevent frozen and broken pipes. There is still the need for water in South Carolina, even into the fall and winter months. Grasses do become dormant as the weather cools, but because our climate is so mild, your lawn and garden can still benefit from occasional watering.

    How to Know When to Water

    Instead of guessing when your dormant grass needs watering in the fall, you can use smart controller technology. It keeps track of weather conditions and then automatically runs the irrigation system to compensate when it gets too dry. They take the guesswork out of running your sprinkler system at the same time they save water. They’ll also give your lawn and garden the boost they need during the cool, dry months, so they come back green and strong in the spring.

    Don’t turn off your sprinkler system just because summer’s over. There’s a better way to take care of your lawn and garden. Contact W.P. Law, Inc. to learn more about when and how to keep your irrigation system running in the fall.

    3 Money-Saving Tips for Sprinkler Usage This Summer

    WP Law - Friday, August 28, 2020
    irrigation

    Can you save money without giving up your sprinkler system this summer? You can’t quit watering your lawn, but you can do it without blowing your budget. Here are three money-saving tips that can help.

    Tip #1: Use a Rain Sensor

    Does your irrigation system have a rain sensor? If not, it’s time to incorporate one. It senses rain and turns your sprinkler system off if it’s not needed. After a set amount of time, it will turn your system back on. It’s like a pause or a rain delay, so you aren’t watering your landscaping when Mother Nature is doing it for you.

    Tip #2: Check Your Sprinkler Heads

    This is a simple solution to prevent you from wasting money, and it can make a huge difference in your water use. Go through your zones, one at a time, and check each sprinkler head. Make sure it’s working properly, that it’s not clogged with dirt or grass, and points in the right direction. You don’t want to spend money watering the sidewalk.

    Tip #3: Optimize Your Programming

    An automatic irrigation system is like having a smart thermostat - it’s only as good as its programming. If you don’t take advantage of all of the options, you’re wasting water and money. Optimizing your programming can help you use less water and save money on your water bills. Be sure you’re following your municipal watering guides and restrictions when programming your settings.

    Are you looking for more tips and tricks to help you use less water and save more money on your sprinklers this summer? Contact the pros at W.P. Law, Inc. for the expert advice you need to keep your yard looking great without flattening your wallet.

    What Is the Difference Between Drip Irrigation & Sprinkler Systems?

    WP Law - Thursday, July 30, 2020
    sprinkler

    Every yard has its own requirements when it comes to water and irrigation. Some need a drip system, some need a sprinkler system, and some need both. What does your landscaping need? Let’s take a look at the difference between the two and where each works best.

    Drip Irrigation

    A drip irrigation system is what it sounds like – it allows water to drip instead of spray. Water comes out of the line slowly to provide the right amount of irrigation to different types of landscaping. The lines run either on the ground near the landscaping or under the soil. The benefits of a drip system include the ability to focus water on particular trees, shrubs, flowers, and plants, so water gets to the roots. Using this type of irrigation helps you manage how much water different areas of your yard get and avoid evaporation from spray sprinklers.

    Sprinkler Systems

    Sprinkler systems are the most common type of residential and commercial irrigation. Watering with above-ground sprinklers helps you cover a lot of ground with a lot of water in a short amount of time. Unlike drip systems, sprinklers spray water out and over the landscaping. The benefits include automatic watering, so you don’t have to drag hoses, the ability to set programming to water when you want, and watering the right amount for your yard.

    Some landscaping only needs a sprinkler system to thrive, while some need a drip system to keep the roots irrigated, and some do best with a combination of the two. To find out what would offer the biggest benefit to your yard and garden, talk to the pros at W.P. Law, Inc. about installing an irrigation system to keep your landscaping looking great.

    How do I Permanently Get Rid of Summer Weeds?

    WP Law - Thursday, July 16, 2020
    weeds

    Nothing wrecks your beautiful lawn like a bunch of summer weeds busting through. Everything from dandelions to fescue and ryegrass to foxtail, weeds can take your yard from fabulous to frustrating pretty quickly. You can pull weeds all day and still not permanently get rid of them. What can you do? Take a look.

    Start with Lawn Care

    The first step to getting rid of weeds is taking proper care of your lawn. Mowing your grass too short can invite weeds in, as can soil that’s too compact. Another thing that can entice weed growth is a lack of water. They’ll take over when the grass, shrubs, and flowers start to suffer from being too dry.

    Treat Your Lawn

    There are two primary types of herbicide weed killer – pre-emergent and post-emergent. Pre-emergent attacks weeds at the root before they appear in your yard. Post-emergent kills the weeds that are already growing that you can see in your grass and garden. If you want a natural weed killer, vinegar that has an acetic acid level between 10 and 20% will also kill weeds.

    Prep in the Fall

    Seeding your lawn in the fall can help keep it thick and lush and make it difficult for weeds to grow. Aeration will also help keep them at bay. The best defense against weed growth is a healthy lawn year-round.

    Are you battling weeds in your lawn every summer? Take a look at these tips for getting rid of them for good. For more help and expert guidance on all of your landscaping needs, contact the experts at W.P. Law, Inc.

    3 Ways to Detect a Drainage Problem

    WP Law - Thursday, April 16, 2020
    probleml

    Whether you have landscaping in a small backyard or you take care of the grass in a giant sports facility, detecting a drainage problem can save you a lot of headaches. Here are three ways to identify a problem with your drainage.

    #1: Pooling Water

    If you have pools of water after it rains or after your sprinkler system runs, it could indicate improper drainage.

    #2: Soggy, Squishy Areas

    If your yard or field is soggy or squishy after irrigating, you might have a drainage problem.

    #3: Soil Erosion

    When water doesn’t drain properly, it can result in soil erosion. If you find fissures or depressions in the ground under your grass, the water probably isn’t draining well.

    What Causes Drainage Issues?

    There are many potential causes of improper drainage in a yard or a field. It can be anything from a high water table to a poorly graded surface. Other issues include bad soil, blocked runoff drains, and poorly designed landscaping and plant beds.

    What Can You Do About It?

    Drainage issues are often complicated to identify and rectify. Understanding soil, grading, the way different types of plants and grasses absorb water, how root systems can affect absorption, and how water moves underneath landscaping are all critical to correcting bad drainage. Your best bet is to work with a professional landscaper who understands water drainage and can help you get your field or your backyard back in shape.

    If you notice any of the common signs of a drainage problem, don’t wait until it gets worse. Contact the landscape and irrigation specialists at WP Law today for the drainage solutions you need.

    Critical Off-Season Maintenance Steps for Your Athletic Field  

    WP Law - Wednesday, February 13, 2019
    sump-pump-stations

    Turf managers often face the unenviable task of producing safe and robust athletic fields after the winter chill has done its share of damage. Although athletic field managers and grounds crews are at the mercy of Mother Nature’s warmth — to some degree — there are things that can be done in the off-season to minimize setbacks. By taking proactive measures in the off-season, athletic fields can be at their optimal playing conditions come spring. These are must-do steps to ensure top quality playing surfaces.

    Soil Fertility

    Turf that receives heavy traffic requires appropriate nitrogen replenishment in the off-season. Among the best ways to revitalize worn athletic fields is by utilizing nitrogen and experts generally call for one-quarter to 1 pound of nitrogen per 1,000 square feet of turf, depending on the type of grass.

    Another essential step is to ensure that the phosphorous and potassium levels in the soil are optimal for growth. Fertility generally requires the ongoing testing and oversight of an athletic field expert. Many schools, universities, and sports organizations outsource these responsibilities to specialists.

    Why Aeration Makes a Difference

    During the cool off-season, turf can continue to grow at a productive rate. Among the best practices for off-season fields is to properly aerate and topdress while traffic is minimal. Some fields can be aerated in late fall while others are best served during spring. The determination about these practices is generally a matter of traffic and the type of turf. Grass enjoys the best chances of complete recovery from compaction through such core cultivation measures in the off-season because the practice helps water to deliver vital turf nutrients.

    Appropriate Off-Season Irrigation

    It stands to reason that sports fields have changing irrigation needs from season to season. Weather conditions, temperature and traffic impact athletic fields and are drivers in appropriate management. Soil also plays an essential role in the approach irrigation professionals take as well.

    While some adopt the general principle that deep and infrequent irrigation is a tried and true method, clay and sandy soils may not hold moisture in the same manner as others. Irrigation procures must be crafted to account for the type of soil, season, amount of traffic and type of turf among other factors. Getting it right requires experience.

    Contact an Athletic Field Specialist

    Maintaining quality athletic fields that are safe and aesthetically pleasing calls for the practical knowledge and expertise of a specialized company. A high-level sports field requires precise irrigation and fertilization measures all year. The professionals at W.P. Law have been providing irrigation services for athletic fields for nearly 50 years. Don’t wait for your team to start pre-season practice, call W.P. Law to maximize the safety and beauty of your athletic fields today.

    Maintaining Your Outdoor Sports Field for the Winter Season

    WP Law - Friday, December 21, 2018
    maintining-sports-field

    Athletic fields are rarely given a rest. Between the different seasons and heavy foot traffic, sports fields experience extreme wear & tear throughout the year. It can be a real challenge to keep fields ready for its in-season sport and to ensure that they will not only look their best, but they will be as healthy as possible for years of continued beauty and safe use.

    1. Hollow tine aeration

    Aeration is key in loosening up the soil and increasing water infiltration as well as oxygen flow to the roots of your turfgrass. Hollow tine aeration works best after the fall sports season because of the amount of disruption it causes.

    2. Overseeding

    It is important to undertake overseeding on the worn out areas of the field during the winter season. Overseeding can help prevent further damage if the field is used during the winter months. When the winter ends and warm weather sets in, worn areas can be reseeded and the seeds will germinate and start to fill up the bare sections of the field as well as increase turfgrass density.

    3. Top-dressing

    Undertaking top dressing after the hollow tine aeration contributes massively towards improving the conditions of the grass come spring. Consider using compost as the top dressing material on native soil fields, and sand as the top dressing material on sand-based fields.

    4. Consider using growth covers

    Growth covers will help you to create a greenhouse-like effect over your field to allow seeds to germinate and grass to grow during the winter season.

    Backflow Preventer: Why Do I Need One?

    WP Law - Tuesday, November 20, 2018
    backflow-preventer-(1)

    What is a Backflow Preventer and why do I need one?

    Many people do not understand the importance of having an irrigation backflow preventer and why it is necessary. The landscape around your home or business is filled with all sorts of things that can make you sick if ingested. Fertilizers, pesticides and the bacteria found in pet wastes just to name a few.


    Most irrigation systems are connected to a potable water supply. Backflow preventers, as the name implies, prevent contaminated water from flowing back into the potable water supply. Backflow can occur if there is a sudden pressure drop in the municipal water line. This could be caused by the opening of a fire hydrant for example. When the pressure drops on the supply side of an irrigation system, water that is standing around a sprinkler head can be drawn back into the municipal water line, thus contaminating the potable water supply. Backflow preventers keep this from happening.


    Because the potential risk for contamination is high, most municipalities require the installation of a backflow prevention device on all irrigation systems and require that they be tested at least annually.


    There are several types of backflow prevention devices. The type of device you are required to install is largely dictated by local codes. These codes can vary by water purveyor so make sure you contact them for a list of approved devices and manufacturers.


    Visit the irrigation specialists at W.P. Law, Inc. for quality irrigation systems and supplies, plus get more information and advice on why an irrigation backflow preventer can be a benefit for your system.

    4 Things to Look For In an Overheating Pump  

    WP Law - Thursday, September 13, 2018
    agricultural-irrigation An overheating water pump can shorten the life of the motor and cause damage to surrounding piping. Even a brand new pump can get too hot and suddenly stop working and have to be replaced. 

    Save money and hassle. Know the warning signs of an overheating pump. Here's what you need to know:  

    1. You Can't Touch It 

    If you can touch the pump (not the motor) without feeling any significant heat, then the pump is probably working as it should. But if the pump feels hot to the touch (be careful) or you see steam, then it is running too hot. This applies only to the wet end. Electrical motors will feel hot to the touch even under normal conditions as most run at an ambient temperature of 40 degrees C, which is over 100 degrees F. This will feel hot to the touch. Of course a motor running at a temperature above 40 degrees C can be an indication of a problem with the motor. 

    2. The Pump Sounds like Rocks Are in It 

    If your pump is making a noise that sounds like rock are tumbling inside, then the pump is probably cavitating. Cavitation can occur if the suction lift is too high, the suction line is partially blocked or the temperature of the liquid being pumped is high. Cavitation can cause serious damage to the impeller of the pump. 

    3. It's Losing Prime 

    The internal components of a pump depend on the fluid flowing past them to keep them cool. If the pump loses prime, then the water inside of the pump casing can get extremely hot (due to the friction of the impeller) and eventually turn to steam. When this happens, the high temperature can damage seals, the impeller, and even plastic piping connected to the pump. The most likely culprits to cause a pump to lose prime are a small air leak in to suction line or a leaking shaft seal. 

    4. Look for Clogs 

    A clog in the suction line or strainer may be restricting the flow of water and can cause cavitation or loss of prime. Either of these conditions can cause the pump end to overheat. 

    5. The Motor is Drawing too Much Current 

    The motor name plate includes some important information. Two pieces of vital information are the motor service factor (SF) and the full load amps (FLA). Amperes or amps is the unit of measure of electrical current and is an indication of how hard an electrical motor is working. At a given voltage, the higher the amps the more work a motor is doing. The FLA listed on the motor name plate is the amount of current that that particular motor should draw when it is under full load. The FLA can be exceeded by the amount of the service factor, but anything higher is considered excessive and can be an indication of a motor or pump problem. Several factors can cause a pump to draw too much current. Among those are the pump is operating at the far right hand of the pump curve; a mechanical issue such as bad bearings; a bad winding in the motor; or the pump is wired to the incorrect voltage. 

    Don't Ignore an Overheating Pump Ignoring it could cost you. If you don't know why it's overheating, call an expert. We can help.

    3 Signs You Are Losing Money Due to a Hidden Irrigation Leak

    WP Law - Monday, September 10, 2018
    agricultural-irrigation We use irrigation systems today to keep our lawns, gardens, and other grassy areas looking good without the hassle of having to water it every day. Sometimes though, there may be issues with your irrigation system that you may not even be aware of, due to most of the system’s components being hidden underground. Here are some indications that you may have a hidden irrigation leak that is costing you money: 

    Signs Your Irrigation System is Leaking


    1. Your Lawn is Dying – Seeing dry, brown spots of grass is a certain indication that it is not getting enough water. There may be a loss of water to those areas due to reduced water pressure in your irrigation system. Getting too much water due to a leak is also an issue, which can kill root tissue.  
    2. Soggy Patches – Leaks in your irrigation systems can leave soggy wet spots on your lawn. If you see areas that are consistently wet and/or feel soft and muddy when you walk on it, this typically indicates a problem with the irrigation system. 
    3. Higher Water Bills – Often, the first sign of an irrigation system leak is a water bill that is higher than usual. Look at your water meter and if it is constantly turning, and all other leak sources such as washing machines, toilet, and sinks are working properly, this is a good indication your irrigation system is the problem. 

    The experienced team at W. P. Law, Inc. is ready to help with your irrigation project no matter the size. From home lawns to ball fields to thousand-acre farms, our highly trained Irrigation Specialists can assist you with system design, troubleshooting assistance, contractor referrals, and installation guidelines. Contact us here for more information.

    3 Ways To Troubleshoot Sprinkler Head Issues

    WP Law - Thursday, August 23, 2018
    sprinkler-head-issues

    If you have an irrigation system installed on your property, you know how critical it is to have it working properly. When sprinkler head issues arise, they need to be taken care of as soon as possible to prevent water waste, crop damage and more. Here are three ways to troubleshoot sprinkler head issues.

    1. Uneven Spray

    Watch your sprinkler head when it’s in action. Is the spray consistent, or does it sputter, or produce an uneven spray? If it’s the latter, the problem might be as simple as a clogged sprinkler head. Lawn cuttings, dust and dirt can get kicked up while you’re mowing, or during heavy rainfall. It lands on your sprinkler head and clogs the holes where the water comes out. You can remove the nozzle and clean any debris that may have accumulated.

    2. Yellow grass

    If you have yellow grass in an area around a sprinkler head, you probably have a leak. Overwatering almost always leads to yellowing. To check, walk around the area and see if the ground feels spongy. You can also watch the area while the sprinkler system is running and see if you notice water bubbling to the surface. If you notice either of these problems chances are you have a leak and you will need to dig down to the pipe to locate and repair it.

    Take care of this as soon as possible, because even one leaking sprinkler head can drive up your water bills.

    3. Dead Grass

    If you have an area of dried or brown grass, then that area is not receiving adequate water. Typically this means that a sprinkler head is not rotating or a zone valve is not opening. Simply watch the system while it is operating and see if you have a head that is not rotating. If that is the case, then simply replace it. If you have an area where several sprinklers are not popping up and working, then you most likely have an issue with a valve or a programming error on your controller.

    These are three easy ways to troubleshoot common sprinkler head issues. For more assistance with your sprinkler system, contact us today.

    What a Soil Test Can Reveal About Your Lawn

    WP Law - Thursday, August 09, 2018
    soil-test

    The quality of your soil is crucial for a healthy lawn and landscape. Here's what a soil test can tell you:

    Composition

    Most soil has at least some clay, silt, and sand in it. A soil composition test can tell you how much of each is present in your soil, relative to the amount of soil. If your soil has too much of one or more of these ingredients, it can affect how your soil drains and in turn your plant’s health.

    Nutrient Content

    For optimal growth, your soil should have a number of nutrients, including but not limited to:

    • Nitrogen
    • Potassium
    • Phosphorous
    • Magnesium
    • Calcium
    • Iron
    • Copper
    • Zinc

    Each type of plant or grass requires different levels of certain nutrients. A soil test can tell you what nutrients are present in your soil and in what amounts, so you can add or reduce as necessary depending on what you plan to plant in the area.

    Contaminants

    A soil test can also tell you if there are any contaminants in your soil, such as mercury, cadmium, lead, arsenic, and barium. If your lawn or plants have been doing poorly despite your best efforts, a soil test can let you know if contaminants are the culprit.

    Good growth requires good soil, and the first step to getting good soil is to know what's in it. Contact W.P. Law, Inc. for more information on getting a soil test that gives you the information you need to get started.

    Ultimate Guide to Getting the Most Gallons per Minute out of your Well  

    WP Law - Thursday, July 26, 2018
    water-well

    In most states, including South Carolina, building codes require that your well deliver at least three gallons per minute (GPM) or more. However, the minimum is not necessarily the optimum amount of water for your family and its multiple needs. A qualified well driller can help you determine the best location for your well and can give you an idea of the expected capacity based on his experience of drilling other wells in your area.

    1. Check for clogged or leaking pipes.

    One of the first things to check on your well system is to make sure there are no broken or leaking pipes within the well. A broken well pipe can possibly cause your well pump to overheat and damage the motor.

    2. Use a well yield increase method.

    There are a number of methods that are used to fracture the rock within a well to help increase yield. A commercial product, such as AquaFreed, can help increase the well's yield as can the use of materials like frozen CO2.

    3. Install a water holding tank.

    Using a cistern along with your well allows you to store water on days when the well is flowing smoothly and have it on hand for those days when the well is dryer.

    To learn more about getting the most from your well, contact W. P. Law, Inc. We are one of the Southeast's leading suppliers of fluid handling equipment for farmers, contractors, and industries and have been helping people and companies like yours since 1970.

    Three Common Mistakes People Make When Watering Their Lawn  

    WP Law - Thursday, July 05, 2018
    water-lawn

    A lot of money and effort goes into keeping your lawn looking healthy. Poor watering habits often have the opposite effect on your grass. Make sure you’re not indulging in any of these bad watering techniques

    Watering When It’s Hot

    Don’t make the mistake of watering during the day while the sun’s beaming down. Water evaporates quickly and never makes it to the grass roots, leaving your grass still thirsting for refreshment.

    Try watering early in the morning while it’s cool to give water a chance to sink down into the soil.

    Using Too Much Water

    Many people respond to brown spots in their grass with more water. You could end up depriving your roots of oxygen by oversaturating them and they will suffocate and die. Limit your watering days and do regular checks to your irrigation system to keep it functioning properly.

    Watering at Night

    The best time to water is early in the morning. This allows the blades of the grass to dry during the day. Watering at night allows the grass to stay damp for long periods of time thus causing your lawn to be vulnerable to disease and insects.

    Find out more about properly watering your lawn by calling W.P. Law Incorporated at (803) 461-0599 or (800) 476-4515.

    4 Reasons We Love Residential Sprinkler Timers

    WP Law - Thursday, June 28, 2018
    outdoor-kitchen-this-summer

    Sprinkler water timers are an efficient way to manage and keep your home’s irrigation needs in check. They can save you a lot of time, effort, and money in watering your lawn, helping you kill several birds with one stone.

    Here are a few reasons why we love sprinkler water timers:

    They take the guesswork out

    Sprinkler water timers help you take the guesswork out of your lawn irrigation and maintenance. They let you establish a watering schedule that ensures your lawn is irrigated regularly. Even when you are not around, water sprinkler timers ensure your lawn is consistently watered at the set intervals.

    They guarantee saturation

    Lawn watering is never about making the grass wet. Too little water or too much water for your lawn is unhealthy. Therefore, lawn watering should be about saturating the soil and getting water to the grass' roots to nourish it. Water timers help you achieve this by ensuring the lawn is watered at the appropriate time and at the right place, guaranteeing perfect saturation at all times.

    They offer customizability

    With season changes, or even with day-to-day weather changes, it’s vital to change your watering schedule to fit each weather pattern. Water sprinkler timers help you customize your watering schedule to adapt to each season or weather change, all year round.

    They save money

    Water timers help you save money by regulating the amount of water used watering a lawn. Without water timers, your sprinklers don’t know when to stop, and if you are not around, they can flood the lawn.

    Consider installing sprinkler water timers on your lawn today and enjoy all the above benefits. Contact the professionals at WP Law Inc. for more on timers!

    3 Signs Your Irrigation System Has a Leak  

    WP Law - Thursday, June 21, 2018
    outdoor-kitchen-this-summer

    When you irrigation system is functioning properly, you can look forward to a lush, green and healthy property. But if the irrigation system develops a leak, all your efforts will go to ruin unless you quickly mitigate the problems. Here are three signs your irrigation has a leak.

    1. Soggy Spots

    If you’re walking around your property and notice that one area feels soggy or boggy underfoot, you may have detected a leak in your irrigation system.First, eliminate the possibility that the sogginess is simply a result of surface water accumulation due to a recess in the land topography. If not, investigate the irrigation system near that location to determine the exact source of the leak.

    2. Unusually High Water Bills

    Carefully monitor your water meter and bills so that you have a baseline for your property's normal water usage in each season. A prolonged increase in water bills could mean that the water company has raised their rates, so it’s important to review your water meter readings in tandem with the water bills. If you notice a spike in the water bill along with unusually high meter readings, you may have a leak in your irrigation system.

    3. Plants are Unhealthy Looking

    Your irrigation system should ensure that all parts of your property are receiving adequate hydration. If you begin to notice that certain areas of your property are looking unhealthy, this is a sign that you may have an irrigation system leak. Telltale signs of an irrigation leak include yellow patches in one area, which indicates over watering, and dry, brown patches in another, which indicates that the leak is limiting water accessibility in that area due to reduced water pressure.

    An irrigation leak that is left untended can wreak havoc with your property and profits. At the first sign of an irrigation leak, contact WP Law. We can help to determine the exact source of the leak, and implement solutions to take care of it.

    How Powerful Does My Sprinkler Pump Need to Be? Learn now

    WP Law - Thursday, June 14, 2018
    outdoor-kitchen-this-summer

    Are you looking to keep your grass green and your garden growing all summer long without wasting resources? At W.P. Law Inc. we have the solution to your problem. Sprinkler pumps are the solution. They are designed such that they save you money while at the same time conserving resources. Sprinkler pumps provide a steady flow of water while providing enough pressure to push water out of the sprinkler head.

    Several factors will affect the water pump used. They include;

    How high are you pumping the water?

    Before purchasing a pump, we advise our clients to measure the amount of lift required from the surface of the water source to the pump. It is much easier for the pump to push water out than it is for it to pull water up. Therefore, the higher you have to pump the water, the more powerful pump you need.

    How far are you pumping the water?

    The distance the water has to travel before it reaches the sprinkler heads will also affect your pump choice. The longer the distance between the pump and the sprinklers the more the friction, and the more powerful the pump should be to maintain optimum flow and pressure.

    How wide is the area the sprinklers have to cover?

    To figure out which pump you should purchase you should consider the area the sprinklers have to cover. First, you have to calculate the gallons per minute (GPM) for each sprinkler and then add them up. The sprinklers' GMP and PSI (Pounds Per Square Inch) will affect the sprinkler pump required.

    The terminology used regarding pumps can be confusing to most people. If you need help figuring out which pump you need, consider contacting W.P. Law Inc. for expert advice.

    A Beginners Guide to Irrigation Filters  

    WP Law - Thursday, May 17, 2018
    Irrigation-filters

    Every irrigation system needs some type of filter to keep sand and debris from clogging the system or causing serious damage. The type of filter that you use will depend on your specific system needs. An irrigation filter can require a bit of routine maintenance, but it is an inexpensive form of insurance that will keep your irrigation system running year after year. Here's a beginner's guide to some of the different types of irrigation filters.

    Screen Filters

    Screen filters are usually the most cost effective filter and also the most common. They're really good at keeping sand out of a system. However, if your water contains a lot of organic debris, you'll want to go with an automated self-cleaning screen filter.

    Spin Clean Filters

    A spin clean filter is a unique type of irrigation filter that stays clean while it's in operation. These filters move debris, especially sand, across a screen and into a basin where it can be collected and drained. As long as your water pressure remains consistent, the filter will clean itself, reducing the amount of maintenance needed for the system.

    Media Filters

    If you've ever seen a swimming pool filter, chances are it was a media filter. These filters use a type of media (usually sand) to stop debris. The water is forced through the media and when any debris hits the media, it stops because it can't fit between the spaces. Sand comes in in different size ratings, so you will want to choose a sand that is appropriate for the type of debris you want filtered out.

    Disc Filters

    A disc filter uses a container filled with a stack of round discs. When water is forced through the filter, the discs catch any organic debris or sand and trap them. Disc filters are highly effective, but they have to be flushed or manually cleaned.

    If you're not sure what type of irrigation filter you need for your situation, contact us at WP Law. We're happy to answer any questions you might have about irrigation filters.

    2 Simple Fixes for Sprinkler Systems With Low Pressure

    WP Law - Thursday, April 26, 2018
    sprinkler-systems-with-low-pressure

    Sprinkler systems are a great way to keep your yard and landscaped areas lush and vibrant throughout the spring and summer seasons. Yet as with any outdoor system, sprinklers will need some routine maintenance and repair to keep them functioning optimally.

    One repair concern you may find yourself needing to address is low pressure on your sprinkler system. The good news is, low pressure in a sprinkler system can be the result of some simple issues that aren't too difficult to fix. If you have low pressure in your sprinkler system check out these two simple fixes.

    Check Your Backflow Preventer Valves

    Backflow preventers are a safety feature on irrigation systems that prevents contaminants from entering into the water supply. A backflow preventer is designed with two pipes connected perpendicularly and valves that will open and close each of the pipes. Since backflow preventers use pressure to keep out contaminants, if one of these valves is not fully open or is clogged the pressure in your system may be reduced.

    Check Your System for Grass, Dirt, or Debris

    Sometimes the problem with the pressure in your system is as simple as overgrown grass or weeds, or dirt and debris making its way into the irrigation lines. Weeds and grass can overgrow around the sprinkler heads causing the blades and roots to get into the sprinkler head resulting in clogs in the system. It is also possible to get dirt and debris into the line underground. As lines get older or sometimes damaged by tree roots there are be small cracks or holes in the line that can fill up with dirt causing the flow and pressure to lessen. To rectify this problem, you can flush out the lines, but if there are major cracks in the lines where the debris is coming in, they should be repaired or replaced.

    Don't get discouraged by low-pressure problems, contact the experienced irrigation professionals at W.P. Law Incorporated to determine your sprinkler system pressure problems and get your system back up and running as efficiently as possible.

    3 Tips for Adding to Your Existing Drip Irrigation System

    WP Law - Thursday, April 19, 2018
    adding-to-drip-irrigation-system

    One of the best parts of being an avid gardener is finding that perfect perennial or adding to existing vegetable beds. In many cases, that means either watering by hand or adding to an existing system. Drip irrigation systems allow people with a green thumb to simply turn a spigot and appropriately hydrate plants. They also provide excellent flexibility to grow with your gardens.

    These are some tips for adding on to an existing drip irrigation system that will help improve plant health and increase your leisure time.

    Consider Watering Zones

    Running water from one source means that your system may suffer pressure loss at it grows. One of the keys to a productive drip irrigation system is separating the system by zones. This can be accomplished by strategically installing control valves. When control valves are in the off position, water pressure will be heightened in the areas in play. Control valves can be manual or automated, depending on your needs. Many homeowners prefer automation because they account for human forgetfulness.

    Consider Mini Sprinklers

    Drip irrigation systems do not have to be cookie cutter. Sometimes hard to reach areas call for water to be projected a short distance. Consider additional conveniences such as mini sprinklers to maximize the benefit of your drip irrigation system. The alternative is regular watering by hand.

    Consider Shade And Full-Sun Areas

    When developing a plan for your drip irrigation system, consider that specific plants and areas will have varying hydration needs. Avoid over-watering shaded areas and under-watering full-sun plants. This may be accomplished by the number of emitters on a particular line or control valve automation. A healthy garden is one that gets what it needs, and no more.

    We hope these drip irrigation tips prove helpful. If you would like to install a drip irrigation system or update an existing one, contact the professionals at W.P. Law for a consultation.

    4 Easy Solutions to Protect Your Garden from Pests

    WP Law - Thursday, April 12, 2018
    protect-your-garden-from-pests

    It's disappointing to discover that animal pests have invaded your garden and that you don't have the quality of vegetables that you expected. Whether it's gophers, moles, birds, or another type of pest, you can expect to see critters taking advantage of your garden.

    Not all animals are bad for your garden. For example, bees help pollenate your garden, ladybugs help control aphids and many other harmless insects feed on other bugs that could be harmful to your garden.

    If you have specific pests invading your lawn, you may need a more tailored approach:

    Protecting Young Plants

    Plants are most venerable when they are freshly planted, and young. The best way to protect this portion of your garden is a physical barrier. This will discourage animals like deer and rabbits from feasting on younger plants before they have the chance to strengthen and flourish.

    Gophers and Moles

    Not only do these burrowing animals ruin your vegetables, they can wreak havoc on your lawn. One solution is to use an electronic rodent repeller. After you dig a small hole in the ground and place the device, it emits a noise that frightens these pests and keeps them away from your garden.

    Birds

    Placing screening over your vegetable garden is the best way to prevent birds out. To start, place stakes approximately three feet apart and around the outer perimeter of your plants. Next, stretch a long string from one corner to the other and around the plants' perimeter to attach it to the stakes. Lastly, place the netting over the string and pull it tight and secure to the ground.

    Chemicals and Fertilizers

    Some pests are so persistent that you may need to apply chemicals or fertilizers that could potentially deter them. If you go this route, be sure to keep the supplies away from your own pets.

    W.P. Law is here to help you make the most of gardening season. Feel free to contact us with any questions.

    How Safe Are Lawn Chemicals for Pets?

    WP Law - Thursday, March 29, 2018
    safe-lawn-chemicals-for-pets

    Many home owners enjoy maintaining a beautiful green lawn during the summer months. Chemicals sprayed or spread on lawns to cultivate growth, and to control weeds and insects should be used with proper precautions to reduce the risks to pets. The risks to pets vary depending upon the kinds of chemicals to which they are exposed, the degree of exposure and the health and age of the animal.

    Labeling Lawn Chemical Products

    Today's greater awareness among modern lawn chemical developers has spurred efforts to improve chemical product labeling to help inform users on proper handling, use and storage, in the interest of greater safety.

    Warning labels on lawn care products packaging now also typically list the contents' specific hazards to animals, and provide statements about necessary precautions during use.
    Users of lawn care chemicals should read product labels carefully and take appropriate measures to maximize safe handling, application, and storage of all chemical products produced for yard applications.

    What Pet Owners Can Do for Pet Safety with Lawn Chemicals

    There are many actions that pet owners can take to maintain a beautiful lawn, while keeping pets safe.

    • Don't over-treat your yard. Most lawns require little additional chemical treatment after initial seasonal fertilizing.
    • When using weed control products that must be allowed to dry on the leaves, ensure that pets do not access the area during the waiting time necessary for the leaves to completely dry.
    • Store all lawn chemicals in a secured location that is inaccessible to pets (and children).
    • Keep pets, water bowls and pets' and children's' toys inside during chemical treatment of yards, and ensure that there is no danger of chemical exposure before allowing access.
    • Wash dogs’ feet and stomachs thoroughly after any accidental exposure to lawn chemicals.
    • Change clothes and shoes that were worn during a fertilizer or chemical application to prevent accidental transfer and exposure.
    • Use organic alternatives to manufactured chemicals, when possible, for cultivating your lawn.
    • Reduce your need for manufactured chemical applications by adjusting your soil's acidity or alkalinity (pH), so that it is at optimal pH for grass to grow. See your garden supply expert for instructions and supplies.
    • Use slow-releasing organic fertilizer for stimulating grass growth.
    • Set your mower blade higher, instead of cutting grass very low, in order to crowd out weeds.
    • Be cautious near parks or neighboring yards that are treated with chemicals.

    W. P. Law, Inc., Lexington, SC

    For more information about lawn cultivation and maintenance products and services, contact W.P. Law in Lexington, South Carolina. We're here to answer your questions, any time.

    4 Essential Steps to Raise Your Sprinkler Heads

    WP Law - Thursday, March 08, 2018
    raise-your-sprinkler-heads

    As spring approaches and people are starting up their sprinkler systems, one overlooked part of system maintenance is the proper positioning of sprinkler heads. Over the years as people top dress their lawns, sprinkler heads can become partially buried causing poor performance and wash-outs. An incorrectly positioned sprinkler head can affect water distribution and uniformity leading to dry spots and poor turf growth.

    Below are the 4 steps you should follow when raising sprinkler heads to maximize the efficiency of your irrigation system

    1. Begin by assessing how high you need to raise the sprinkler. With a hand shovel, dig around the sprinkler on all sides. The depth should be around 6-8 inches to give you some room to work. Carefully lift the grass around the sprinkler head and flip it upside down on the lawn. With a small trowel, remove the dirt from around the sprinkler head taking care not to hit the sprinkler line. Dig deep enough to unscrew the head.

    2. Should you have a flexible riser (sometimes referred to as swing pipe) gently lift the sprinkler head with your hands until the top is level with the ground. If the riser is rigid, use a cut-off riser to adjust the height accordingly. Be careful when cutting the cut-off riser so that the end is smooth and it will connect perfectly with the sprinkler head

    3. Screw the riser into the sprinkler head and then into the sprinkler line. Once it is tight, check to make sure that the head is vertical and rightfully placed.

    4. Pack the removed dirt around the sprinkler head ensuring that it is high enough and almost level with the head. Reposition the grass around the sprinkler head.

    Contact us for all of the parts you need to get your sprinkler system operating at optimum performance.

    Use Landscape Lighting to Bring Elegance to Your Landscape

    WP Law - Thursday, February 01, 2018
    Elegant-Landscape-Lighting

    Outdoor lighting for your landscape adds elegance while providing safety for your family. More and more families are adding lighting to their outdoor living space to extend their evenings.

    There is no need to run indoors when the sun goes down. By adding landscape lighting, you can extend your outdoor use for entertainment, or just to relax and enjoy gazing at the stars.

    There are several different types of landscape lighting fixtures available for you. Well-lights and spot lights are used to highlight architectural details or a specimen landscape plant. Path lights are used to light walkways or to create pools of light in the landscape.

    Adding lighting to an outdoor water feature adds to the relaxation and calming effect trickling water offers. There are dozens of uses for lighting and using it will add, value, beauty and security to your home.

    Whatever your landscape lighting needs are, the experts at W.P. Law can help you find the combination of lighting systems to help illuminate your outdoor space. 

    Tips to Strengthen Your Lawn for Winter

    WP Law - Thursday, November 30, 2017
    Winter Lawn

    The winter can be a welcome period of rest from all the necessary tasks that go with maintaining your lawn in top condition. But if you fail to prepare for the colder months, spring may greet you not with a carpet of lush, green grass, but with unappealing bare patches.

    These simple steps will help you get your lawn winter-ready.

    Clearing

    Anything left resting on grass for a prolonged period, can leave a dead or worn area beneath it. Although the grass may regrow in spring, it is likely to be sparser and shorter than elsewhere, giving an unattractive patchy look to the lawn as a whole.

    So, the first task is to ensure that your lawn is clear of all objects, both natural and man-made, including logs, lawn furniture, items of sports equipment and, as far as possible, fallen leaves.

    Occasional clearing can also be carried out if necessary during the winter months themselves, but ideally the lawn should be left as undisturbed as possible during this period.

    Aerating

    Once its surface is clear, aerating the lawn is vital to break up compacted soil and allow water and nutrients to reach the plant roots.

    Seeding, Fertilizing and Weed-killing

    If your lawn is composed of a cool season grass variety, such as bluegrass or rye, fall is the ideal time of year for over-seeding or re-seeding, but this should take place no later than 6-7 weeks before the expected first freeze.

    Once aerated, the lawn should be prepared for re-seeding and over-seeding by fertilizing, a vital process to replace soil nutrients lost during the heat and heavy use of summer.

    You can spread a natural compost, if you have it, or use a commercial product , paying particular attention to bare or thinly covered patches.

    Make sure newly seeded areas receive ample water, and once new growth is established, use a proprietary product from a specialist supplier to get rid of weeds, fungi and disease-causing pests.

    Mowing

    It's important to keep cutting your grass during the weeks before winter so that it is as short as possible at the end of the growing season. Shorter grass acts as a protector for fragile new growth and also discourages nesting by mice and other animals which may damage large areas of your lawn.

    Gradually reducing the length of your grass with a series of cuts will be less traumatic for the plants than one severe cut at the end of the season.

    Contact Us

    Keeping your lawn in great condition all year round can be a laborious process. But getting professional advice on the exact combinations of fertilizers and weed-killers you need, and when to apply them, can significantly improve your results without involving any extra work.

    W P Law of Lexington SC has been in the business since 1970. Contact us today for details on how we can help you.

    Best Practices for Protecting Your Fountain from Fall's Leaves 

    WP Law - Thursday, November 09, 2017
    Fall Fountain

    Fall can be a rough time of the year for keeping your fountain well maintained and free of debris. Leaves can clog intake screens and damage your fountain pump. They can also break down and form sentiment that can clog nozzles and cause discoloration to your fountain's features over time. To help protect your fountain from leaves this fall season try these best practices below.

    Cover it for the Season

    If you live in a region that has snow earlier in the season, it may be best to winterize and cover your fountain for the cooler weather before the leaves start to fall heavily. You can also buy weatherproof outdoor covers. If you choose this option be sure to properly winterize your fountain before covering it.

    Keep it Clean

    If you want to keep your fountain running throughout the fall season, you can protect it by cleaning it on a regular basis. For best results, you will want to remove any leaves or fallen debris from the fountain on a daily basis, and drain and clean the debris and sediment from the bowls and other fixtures at least once or twice during the season.

    Don't let the fall leaves damage your fountain. Help keep your fountain looking beautiful and running efficiently throughout the fall season by utilizing some of the best practices listed above.

    3 Things to Look For During Your Performance Check

    Marketing W. P. Law, Inc. - Thursday, October 26, 2017
    Performance-Check-on-Irrigation-System

    Everyone fancies lush green lawns and extensive green fields thanks to the innovations in irrigation. However, despite their prowess and precision watering capability, irrigation systems need to be regularly maintained to ensure they function properly.

    If you are scheduling a performance check to determine if your irrigation equipment is functioning properly, here's what you can expect from the maintenance visit;

    Pressure Check

    To make sure that your irrigation system functions effectively and efficiently, the water pressure should be optimal. In most instances, low pressure is attributed to leaks, control valves not set (or operating) properly, airlocks, wrong direction of rotation and a damaged impeller.

    Power consumption check

    Sometimes pumps consume too much power. This is determined by checking the amperage draw when the pump is running. More often than not, high flow rates (caused by leaks or multiple zones running together) and mechanical defects are the main culprits of an upsurge in power usage.

    Leaks

    Leaks not only waste water, but they can cause other problems in your irrigation system as well. Large leaks can cause low pressure problems and pump power usage problems as mentioned earlier. When inspecting your irrigation system for leaks, check the mainline piping as well as isolation and zone control valves. If you are just starting your system for the first time in the spring, make sure that all drain valves (that were opened to winterize the system) are closed.

    Valve diagnosis

    Valves are a key component of any irrigation system. Making sure that they function properly should be of prime importance during any performance check. Control valves not only allow the system to be turned on and off but they also control the pressure going to the submain and lateral lines. The valve should be checked to see if opens and closes properly. Damaged diaphragms and malfunctioning solenoids can cause this problem. Control valves should also be checked to see if they are regulating pressure properly. Damaged control pilots and tubing can cause this problem.

    At the end of this process, your irrigation equipment should be functioning properly and you may have saved yourself a few headaches down the road as well.

    2 Strange Pump Noises and What They Mean

    Marketing W. P. Law, Inc. - Thursday, October 12, 2017
    Fountain Pump

    Strange noises coming from your water pump can be a cause for alarm. Mostly the noises are either in form of humming, buzzing or clicking. In some cases, these noises may be an indicator of trouble on the way, therefore a checkup and repair is highly advised.

    Humming

    If your water pump keeps humming and it's not moving water, the problem could be with the pump motor, motor start capacitor or low voltage. It could also be because the pump has lost prime due to a leaky foot valve. You can try to turn off the pump and prime it manually. Then close the priming opening and start the pump. If the pump loses prime again, check the suction piping for air leaks and the foot valve.

    Clicking

    It's normal for the relay switch in water pumps to click on and off when water is running. If the click happens once every 1 to 2 minutes, then that's okay. But if it happens rapidly, and causes the pump to switch on and off, then there is a problem. You should turn it off immediately to prevent the pump from being damaged.

    There are many more strange noises that you may hear from your water pump that are hard to explain. The best way to diagnose and repair their sources is by consulting the experts at the W.P. Law Incorporated.

    5 Tips for an Effortless Irrigation System  

    WP Law - Thursday, September 21, 2017
    Sprinkler

    In the recent past, there has been a shift from the customary labor-intensive irrigation, to effortless technology backed irrigation. The effortless modern irrigation systems are not only efficient and effective, but there are also pivotal in boosting the crop yield.

    Whether you're using the irrigation systems on your lawn or home garden, here are some basic tips for an effortless irrigation system.

    Use water timers (Irrigation Controllers)

    Water timers are an essential part of the garden irrigation systems. The water timers are used to automate the irrigation system and can, therefore, switch on or off the daily watering. Our water timers are particularly useful to the individuals who lead a busy life; spending most of their times away from home and in most cases do not want to be disturbed about watering their lawns.

    Use of sprinkler systems

    Depending on the size of your lawn, garden or irrigation scheme, we offer various types of sprinklers to cover your property in a quick and easy way. With coverages ranging from 8 to 40 feet, our sprinklers cater to the needs of home gardens and lawns found in most households. And unlike the sprays and micro-jets, which deliver a fine spray, the sprinklers throw large water droplets which minimize evaporation.

    Use of micro jets and sprays

    Our micro-jets and sprays are ideal for delicate plants, like the young seedlings in a seed bed. As the name suggests, the micro jets and sprays deliver water in the form of light sprays.

    Use of drip irrigation system

    Of all the water irrigation systems, the drip irrigation systems are the most efficient. Our drip systems are precisely tailored to deliver water to the roots of the plants. Using a network of pipes to carry water around the garden, the water is channeled to drip emitters that are positioned close to the base of the plant. And because the drip emitters release water gradually, owners can have control over the water used and reduce water waste.

    With the above tips, you can irrigate your lawn and garden more effectively. Contact the irrigation professionals at W.P. Law for more tips and assistance.

    5 Eye-Catching Water Features For Your Home  

    WP Law - Thursday, September 07, 2017
    Water Feature

    From fanciful water fountains, serene property pools to bubbly waterfalls discover water features to set your home apart from the rest.

    Waterfalls

    Without a doubt, a waterfall is one of the most appealing and charming water features to choose for any property or home garden. Aside from the alluring looks, an outdoor waterfall has a unique kind of soothing sound that comes from the waterfall making it an enthralling feature. There are different kinds of waterfalls to choose from depending on the size of a garden and the available free space.

    Garden pond

    What a better way of adding tranquility, ambience and reflection to any landscape design than using a garden pond. And for many of us who have small spaces in our gardens, an open area of water can increase the sense of space. Birds love the ponds too, and the reflective nature of the sitting water will brighten the local atmosphere even during the dullest day.

    Tea pot fountain

    We love to use repurposed content. Featuring antique and rugged tea pots, the tea pot fountain allows water to flow through the spout of the barrels and will provide an enchanting look at any garden. To give the whole fountain a rustic look, combine the vintage tea pots with the old whiskey or wine barrels. Not only does the fountain instill a beguiling landscape, but it`s also a superb way to recycle the old pots.

    The Water Garden

    Water Gardens are beautiful additions to outdoor spaces. They are fairly inexpensive and don't require digging. They only require 5 things: pots, a small pump, water, plants and power.

    The benefit of creating a water garden is that they are often small and do not take up much room, but they provide the sound of falling water, which adds a soothing detail to outdoor living.

    Water features play a major role in transforming a dull space into a paradise. At W. P. Law, Inc. we have an array of exhilarating water features that will luxuriously transform your space at an affordable price. For more information on our products, get in touch with our friendly customer care agents.

    6 Signs You have a Drainage Problem

    WP Law - Thursday, August 31, 2017
    Duo Pro dual-contained piping system

    Often times drainage problems are hard to spot. We tend to assume that everything is going smoothly unless there is an obvious sign to make us aware there is a problem. Dealing with repairs down the line can be extremely costly, so it is best to know what the signs are for drainage problems and deal with them immediately.

    1. Wet spots in your lawn or irregular lawn growth

    If you see wet spots in your lawn when it hasn't been raining, or when some of your lawn is greener and growing faster than the rest of your lawn, that area is probably receiving water which was drained improperly.

    2. Water stains in the basement

    Your first sign might be discolored walls. Depending on where you spot the stain you can gauge the severity of the stain. If the stain is on the wall it could be as simple as surface water, which is an easy fix. However, if you notice a stain that extends around the basement you could be looking at a more extensive repair.

    3. Cracks in the foundation of your home

    Some cracks are normal, as houses settle over the years. But keep an eye on them, and if they are growing you should probably call an expert as they could damage the structure of your house. If the crack becomes larger than 1/8-inch it may be a sign that a drainage problem is ruining your foundation - so don't wait to call in the pros.

    4. Sluggish or belching drains

    If you have more than one drain running slowly, chances are its not a hairball clogging your drain. A drainage problem can cause a vacuum in your pipes, making it hard for water to drain properly.

    5. Sewer odors

    The stagnant water from a malfunctioning drain can cause some pretty gruesome smells, These not-so-pleasant smells combined with the poor ventilation in your air pipes could often causes negative air pressure, letting sewer gas in.

    Finding a drainage problem can be tricky but with these handy tips and the help of the professionals at WP Law we can find a solution! If you have any questions we would be happy to help, contact us today.

    3 Ways to Make Your Home Pop With Landscape Lighting

    WP Law - Thursday, August 17, 2017
    Landscape Lighting

    Are you invested in beautifully trimmed trees and shrubs in your manicured yard? Do you enjoy a magical glow surrounding your home at night? Do you just appreciate having a well-lit path to your front door after dark? If so, this blog post is for you!

    Here, we'll take a look at 3 tips you can use to get the most out of your landscape lighting.

    Tip #1: Know Your Vision

    When putting up landscape lighting, it is best to dedicate time to deciding exactly what you'd like to accomplish. Are you looking for security purposes or perhaps to create an entertaining atmosphere?

    Tip #2: Get Creative

    Landscape lighting is an excellent way to showcase particular areas of your outdoor space. Directional lights can be adjusted to spotlight trees, gazebos, and the architecture of your home. These lights are perfect for creating a more positive and inviting outdoor atmosphere.

    Tip #3 LED or Halogen

    LEDs are rapidly becoming the light of choice for landscape lighting. If you're looking for adaptability and endurance, go with LEDs. They are known to shine brighter during wind, rain or snow. LEDs can also be dimmed or brightened for added effect, based on your preferences.

    Supporting You

    If you'd like help choosing your landscape lighting, call us today. We're here to support you in all of your lighting needs!

    3 Smart Ways to Conserve Water with Your Irrigation

    WP Law - Thursday, August 10, 2017
    Turn off water

    Water is imperative for life -- and for the farmer, the environmentally conscious individual or merely the prudent person, water conservation is a must.

    Here, we'll take a look at three water conserving tips to help you save money and decrease the water that can fall through the cracks during the irrigation process.

    Conservation Tip #1: Collecting Water

    One way to save on water costs and decrease wastage is to capture and store water in designated containers, such as rain barrels, man-made ponds or other receptacles. Rainwater is also better for your plants and the soil because it is highly oxygenated and clear of salts and fluoride that often accompany tap water.

    Tip #2: Working with the Weather

    In order to avoid using unnecessary water and risking over- or under-watering crops, you can monitor the weather forecast and schedule your irrigating only when the rain is scarce for several days. You can also use a rain sensor that detects rain and automatically shuts off the irrigation system at the first sign of a sprinkle.

    Tip #3: Smart Irrigation Controllers

    Smart controller technology helps you program your irrigation system to perform in the most efficient and conserving way possible. This device literally chooses when it is the best time to water based on how much water it detects in the soil. For this type of advanced technology to function properly, it must be installed to industrial specifications.

    Support and Answers

    If you'd like further support in your water conserving efforts, or if you want help installing an irrigation system of your own, contact us. We'll be delighted to help you with all of your irrigation needs!

    Three Great Sprinkler Systems for Your Money

    WP Law - Wednesday, July 05, 2017
    Air Filter

    There is no such thing as one sprinkler system that fits every application. In addition to soil type and the amount of water required, you have to consider details like pressure and flow requirements, application rate, and spacing. The good news is, you have economical, effective options for practically any situation. Here are three solid options:

    Spray Head: This system does precisely what the name implies. It sprays water in a fixed pattern. It does not rotate or change directions. Spray heads are typically used in small irregular shaped areas. Although spray heads are used to cover small areas, the have high application rates and are run for short periods of time. Spray heads should ever be run with other types sprinkler heads.

    Rotor: These sprinklers are often installed at ground level and rotate a stream of water over a medium to large coverage area. Unlike a spray head, you can water a more expansive area with fewer sprinkler heads. They are also quiet when operating.

    Impact: You'll know an impact sprinkler as much by its sound as by sight because of the rhythmic impact the sprinkler arm makes as it hits the water stream. This sprinkler has a coverage area similar to rotors. Because of their design, that simulates natural rainfall) impacts have a higher uniformity than other types of sprinklers.

    Beyond these basic sprinkler types, you still need to consider details like nozzle size, pressure and space. That's where the professionals at WP Law can help. Please contact us any time for professional advice on the right sprinkler system for you.

    Understanding Water Pump Terminology

    Marketing W. P. Law, Inc. - Wednesday, June 21, 2017
    Duo Pro dual-contained piping system

    When it comes to pumps, it's best, to begin with learning the terminology so you can accurately talk with an industry representative about your needs when you're ready to make a purchase. Additionally, knowing the lingo will provide you with the knowledge you'll need going forward to maintain that system and to help diagnose any potential problems.

    Here is a list of the most commonly used pump terminology.

    Air Bound. Occurs when the centrifugal pump body fills with air and the pump loses prime and a vacuum can't be formed. When trying to re-prime the pump there must be a way for the trapped air to escape and allow fluid to fill the pump casing.

    Cavitation. This happens when vapor bubbles implode. Cavitation can cause catastrophic pump failure if allowed to continue over a period of time. Cavitation usually occurs in applications where there is a high suction lift.

    Friction Loss. This is the term used to refer to any reductions in pressure that are caused by turbulence such as when water flows through the hoses, pipes, fittings, and elbows.

    Net Positive Suction Head (NPSH). Is the head (pressure) that allows water to flow into the suction opening of the pump. The NPSH-Available is a function of where and how the pump is installed (suction lift, suction friction losses, water temperature, elevation relative to sea level, etc). The NPSH-Required is a function of the pump manufacturer's design of the pump itself. The NPSHA must always be greater than the NPSHR for the pump to function properly.

    Performance Curves. A performance curve charts the total dynamic head (TDH) or pressure as it relates to flow rate.

    Static. A term used for acting by weight and not by motion. This is the opposite of dynamic.

    Strain Relief Protector. This is the support that keeps any given electrical cord used in a submersible pump from being pulled out of place accidentally.

    Thermal Overload Sensors. These sensors are built-in to most small horsepower (3HP or less) single phase pump motors. These sensors will shut the pump down if the operating temperature gets too high.

    Volute. The volute is also called the pump casing. The volute is where the impeller rotates and pressure is developed.

    Water Hammer. When a sudden stoppage in the flow of water from the pump occurs, the water hammer is the energy that's transmitted due to that stoppage.

    The Bottom Line

    This is just a brief overview of pump terminology. We encourage you to take a few minutes to learn as much pump terminology as you can. Going forward, this will help you make more informed decisions about your equipment and how it all works.
    If you would like more information about pumps or any other type of water service equipment, please don't hesitate to Contact W.P. Law, Incorporated. We have been the Southeast's leading supplier of fluid handling equipment since 1970 and we'd love to show you just how cost-effective using the proper equipment can be.

    5 Ways to Maximize the Efficiency of Your Irrigation System  

    Marketing W. P. Law, Inc. - Wednesday, June 14, 2017
    Duo Pro dual-contained piping system

    If you have an irrigation system, or if you're thinking about installing one, you should also think about the best ways to make it more efficient. This will help conserve water and help save money on your water bill as well.

    Here are five ways that will help maximize the efficiency of your irrigation system.

    1. Use Irrigation Controllers

    Irrigation controllers allow you to control your watering by day and time. Most automatic irrigation systems are divided into zones. The irrigation control turns on each zone at a specified day and time and allows it to run for a set period of time. Automated irrigation systems use much less water than manually controlled irrigation systems.

    2. Install a Smart Irrigation Controller

    A smart irrigation controller will adjust the water supply based on your particular landscaping need while taking into account how much rain you've had. Smart controllers also allow you to take into account the type of plant material that you are watering as well as your soil type. These can be installed new or retrofitted.

    3. Purchase a Rain Sensor.

    A rain sensor will automatically turn off your irrigation system while it's raining.

    4. Use High-Efficiency Sprinkler Heads

    Replace your old sprinkler heads with new high-efficiency nozzles. This will minimize wind drift and ensure that the water is applied evenly across your landscaping.

    5. Water at the Right Time and at the Right Intervals

    It's best to water your landscaping in the early morning to help avoid mildew and evaporation. Additionally, watering in a way that supplies your plants with water when they can best use it is key. It's better to water your landscaping deeply less frequently rather than more often with shorter watering times. This encourages deep root growth which will provide you with a healthier landscape.

    The Bottom Line

    Maximizing the efficiency of your irrigation system doesn't have to be hard or time-consuming. But you do need to learn about what to look for and how to make the necessary corrections when problems are discovered if you want your system to function efficiently and effectively at all times.
    W.P. Law Incorporated was founded in 1970 and has a stellar reputation in the industry. We offer top quality products and economical solutions for all our customers' needs. Therefore, if you have any questions, or want to deal with a company who truly knows how to best address your situation properly, please contact the experts at W.P. Law Incorporated today.

    Why Pump Maintenance and Care is So Important

    Marketing W. P. Law, Inc. - Wednesday, June 07, 2017
    Duo Pro dual-contained piping system

    It would be nice if we could simply install our pumps then let them do their thing, without us having to continually monitor and maintain them. But unfortunately, that's not how things work. That means it's your responsibility to implement a maintenance and monitoring schedule for all your equipment, especially your pumps if you want them to give you the best, most efficient performance possible. Not to mention lengthen their life expectancy. 

    Why You Should Monitor and Maintain Your Pumps

    In an industrial plant, all processes are fluid. That means formulations change and the different production rates will vary. But their supporting pumps, unfortunately, don't change with them. Therefore, you are going to need an extremely vigorous maintenance and monitoring program if you want to maintain your pumps reliability and efficiency. This will allow you to make any adjustments necessary to keep your pumps in peak operating condition at all times.

    The Four Basic Facets of a Pump Maintenance Program

    There are four basic facets of a pump maintenance program and they are as follows:

    1. The pump's performance monitoring and system analysis.
    2. The pump's vibration monitoring.
    3. The pump's bearing temperature.
    4. The pump's visual inspections.

    Each of these maintenance items are indicators on their own. But collectively, they provide you with the big picture of the actual condition of your pump.

    The Six Basic Facets of a Pump Monitoring Program

    There are six components you should be monitoring if you want to understand how your pump is performing. And they are:

    • Suction Lift (vacuum)
    • Discharge pressure
    • Flow
    • Pump speed
    • Pump power

    The Bottom Line

    It's crucial to the performance, effectiveness and life expectancy of your equipment to implement a pump maintenance and monitoring schedule. Not to mention reducing the chances of having to pay for extensive repairs. Take some time to learn the industry best practices for maintaining and monitoring your pump equipment. Any time you spend doing this will pay you back in time and expense going forward.
    If you would like more information about setting up a monitoring and maintenance schedule for your pumps, or any of your other fluid handling systems, please Contact Us today. W.P. Law Incorporated has been an industry leader since 1970. We look forward to showing you just how powerful an effective pump monitoring and maintenance program can be.

    My Water Pressure Fluctuates, What’s Going On?

    WP Law - Thursday, May 18, 2017
    Duo Pro dual-contained piping system

    When your water pressure is fluctuating, a number of problems can be going on. Water pressure issues are most common in homes with a private well system, but can occur anywhere. If your water pressure is strong one minute and weak the next, it could be one of the following problems.

    Your Water Filter is Clogged

    If your water pressure goes low, your first step is to check the water filter for your home. When the filter gets clogged, you won't have the water pressure you are used to. If the clog is only partial, you may notice your water pressure going up and down.

    Sediment is Stuck in Your Faucet

    Sediment buildup is another common problem in most homes that will lead to water pressure fluctuations. Sediment builds up over time, and gets stuck in the aerator screens on the end of the faucet. You can try to take the aerator screen off of the end of your faucet to see if any sediment comes out. The screen comes off by screwing it off. Run the water for a minute with the aerator off to see if this fixes the problem.

    When Your Water is Hard or Has High Iron Content

    If your home has hard water or there is a high iron percentage in your water, this can cause clogging in the lines that provide water to your faucets, rust to develop, or buildup from the hard water.

    If you aren't sure why your water pressure is fluctuating, be sure to contact us, and we'll find the answers to your problems.

    Soil: How Does it Help Determine the Sprinkler I Use

    WP Law - Thursday, May 11, 2017
    Duo Pro dual-contained piping system

    When people are thinking about adding a sprinkler system to their lawn to help with irrigation, they often think about the cost of the system and the size of their lawn before moving forward; however, it is important for people to think about the soil type as well. The type of soil plays an important role in the sprinkler system and should be considered along with the other factors before deciding on a sprinkler system.

    The Intake Rate of the Soil

    One of the factors that people need to consider with their soil is its intake rate. The intake rate is the term given to the rate at which the soil absorbs the water. Soil that has a high intake rate soaks up water faster than soil with a low intake rate. If the soil has a high intake rate, the sprinkler system can apply water at a higher rate; however, if the soil has a low intake rate, the soil cannot absorb as much water as quickly and the sprinkler system run times would need to be adjusted so that runoff is reduced.

    The Water Retention of the Soil

    The water retention of the soil is the term used to describe how well the soil holds on to the water. Soil with a high retention rate holds on to water and does not need to be watered as often. People need to consider the water retention of the soil before deciding on a sprinkler system because it determines the frequency of the water treatments.

    Reach out to your local irrigation experts to discover the perfect system for your lawn. We'll discuss every factor that should be considered when selecting an irrigation system, along with your individual needs. Contact WP Law, Inc today and let's get started on creating a healthier lawn for you!

    3 Signs You’re Ready To Upgrade Your Well Pump

    Marketing W. P. Law, Inc. - Tuesday, April 25, 2017
    Duo Pro dual-contained piping system

    Click Here for larger image. 

    Whether you use your well for intensive irrigation, industrial piping, or simple residential fountains, a consistent and affordable water supply is essential. If your well relies on outdated pumping technology, however, none of these devices will work to their full potential. To know whether it's time to upgrade your pump, look out for:

    1. Electrical Excess

    Obsolete pumps use more energy to move the same amount of water as modern ones. If you notice an unusually high electric bill, your well may be to blame. Replacing the pump with modern model will improve efficiency, paying for itself through lower electrical bills.

    2. Sisyphean Service

    In addition to wasting energy, obsolete pumps break more often and require more extensive service to fix. If you are constantly spending money and time on your well, consider cutting your loses and replacing it. Newer models can work for up to twenty years before needing repairs, thus reducing your long-term maintenance costs.

    3. Pressure Problems

    Traditional pumps struggle to deliver water at the same pressure throughout the system, especially if you use multiple water sources at once. Modern pumps, however, can do this without skipping a beat. If you find that pressure varies during the day or with more intensive water use, you could use a pump upgrade.
    W. P. Law provides the latest pump technologies, as well as in-depth inspections, repairs, and other fluid services, to customers throughout South Carolina. For more information on improving the efficiency and longevity of your water system, visit our website today.

    Should I Water My Lawn In The Winter?

    WP Law - Friday, January 27, 2017
    grass


    Summer months for homeowners are typically spent outside, tending to a healthy and well-maintained lawn. However, when the first frost hits in the south, many homeowners are left wondering what they should do for their lawns in order to ensure their grass comes back in the spring just as lush as it was when it went into dormancy in the fall.

    Why Lawns Need Less Water in the Winter

    During the winter months, the growth rate of many types of grasses found in South Carolina slow considerably. When paired with the changing temperatures, it is easy to see why lawns would need less water to survive. Lower temperatures tell your lawn to go into a dormant winter state in order to survive the cold frost and occasional snow. Regulating how much water your lawn receives during the winter can ensure you never over-water or neglect your dormant grass. A good way to maintain your lawn without having to constantly monitor how much you’re watering is to install an irrigation system. An irrigation system can help you regulate watering times and amounts.

    Should You Water Your Lawn in the Winter?

    The answer to this question relies heavily on the current conditions. In South Carolina, the temperatures can vary from day to day. On colder days, you may not need to water your lawn. However, on days when the temperatures rise and you have not gotten rain in some time, you should consider it. Do not be alarmed by the color of your lawn changing to brown, however. This just means the grass has gone dormant. It is not dead and should continue growing in the spring. Your watering schedule should take into account the temperature and the recent rain amount, not the look of the grass.

    If you have any questions about irrigation supplies or the maintenance of your lawn, contact the experts at WP Law today!

    Why is a backflow preventer necessary in my piping system?

    WP Law - Thursday, October 06, 2016
    sprinkler system

    When talking to an irrigation specialist, you will hear a lot of jargon. One of those is backflow, which goes along with backflow preventer valves. Your installer will no doubt tell you how important it is to prevent backflow.

    What is backflow?

    Backflow is when water (or another fluid) flows through a piping system in the wrong direction. It is most often caused by a sudden drop in water pressure, which can happen any time you are attached to a municipal system – like if the fire service opens a hydrant a few streets over.

    Why is backflow from your irrigation or piping system bad?

    Any kind of backflow is bad. If, for example, you have a lawn irrigation system in your yard, the water used for irrigation will sit in underground pipes for days before the system turns on. Contaminants such as fertilizer, lawn care chemicals and even pet waste can be drawn back into the system if backflow occurs. Backflow can transmit this contaminated water back into the municipal piping system or even your home’s piping system. In industrial systems, backflow can also cause cross contamination with the municipal system or even contamination among other fluids used within the industrial process.

    How do you prevent it?

    Other than avoiding sudden water pressure drops, which are not always avoidable, backflow is prevented by a backflow preventer or valve. There are a variety of types, depending on the application and risk of backflow contamination. The type of backflow prevention device required is usually dictated by local and state codes. Your local water purveyor usually has a list of approved backflow prevention devices available on their website. A backflow preventer contains check valves that only allow flow in one direction. If a sudden drop in pressure occurs upstream of the backflow preventer, the check valves will close and block the flow of water back "upstream" into the system.

    Preventing backflow is a key aspect of proper design of an irrigation or piping system. Contact a professional such as W.P. Law, Inc. to help you prevent potentially contaminated water ending up in your kitchen faucet, or worse.

    Pre-Winter Pond Care Checklist

    WP Law - Thursday, September 29, 2016
    Pond with Koi fish

    It's not too early to start thinking about getting your pond or outdoor water feature ready for fall and winter. Pre-winter maintenance is easy and vital to the health of your pond. Failing to take these steps may create the need for expensive repairs or modifications in the spring. Here are the steps you should take to prepare your pond for fall and winter.

    Water

    • Keep leaves from falling into your pond with netting. The netting will prevent leaves and other debris from entering the pond, making for very easy cleanup in the spring.• Change out up to half of the water. This step will remove contaminants and create better water condition to get through the winter. It's best to do this when the temperature of the pond water is roughly the same as the water source. Just make certain the temperature is above 60°F to prevent stress to aquatic life.
    • Add a conditioning agent with bacterial additives. Make sure the agent is formulated to work during colder temperatures.
    • Clean organic matter from the bottom of the pond.

    Water Pumps

    • Clean pond pump filters thoroughly.
    • If the water temperature gets below 45°F, turn the pump(s) off and remove the filter media and main pump. This will keep freezing temperatures from damaging the pump.
    • Drain the pump according to the manufacturer's instructions.
    Plants • Winter non-hardy plants indoors or in a greenhouse.• If you have hardy water lilies, clip off any pads and buds and place the lily in the deepest part of your pond where the tuber will not freeze.

    Fish

    • When the water temperature gets lower than 70°F, you'll mix wheat germ food with your koi's regular feed. The wheat germ formula helps digestion.• When temperatures get below 60°F, feed wheat germ food exclusively.
    • If the water reaches 40°F, don't feed koi at all.

    If you have any questions relating to winterizing your pond, contact the experts at W.P. Law today!

    What Can Cause Extreme Fluctuations in Water Pressure?

    WP Law - Thursday, September 15, 2016
    Water hose with low pressure

    Water pressure fluctuation is one of the most commonly reported troubles with fluid handling systems. When you have a system in place to deliver water, fertilizer or other liquids, you should be able to rely on a consistent, measurable flow. If you are experiencing extreme fluctuations, one of the following issues might be the cause.

    Air in the Pipes

    When air gets trapped in a piping system it acts as a valve and can “pinch off” or reduce the effective pipe size reducing flow and causing additional pressure loss due to friction. Air will usually accumulate at the highest point in the piping system, but it can also accumulate in fittings and valves, especially when there is a sudden concentric reduction in pipe size. Symptoms include sputtering, a lack of flow, and then a sudden burst. Air in the pipes can be caused by a leaking suction line, damaged tank bladders, a faulty pump, gas build up in the well system, or one or more leaks in the pipe line.

    Municipal Water Failure

    From time to time, municipalities experience water failures that can impact entire neighborhoods. In addition, in areas experiencing severe drought, municipalities may redirect water for urgent use elsewhere. If you suspect that external forces might cause a drop in pressure, check with neighbors to see if they’re having similar problems, or call the town hall for updates on water supply issues.

    Pressure Regulator Malfunction

    Too much pressure can cause pipes to leak or burst, and of course leads to waste. If you are seeing signs of sudden pressure bursts, take a look at the pressure regulator. These are intended to help to control the pressure and protect your fluid handling system. You can ensure that the regulator works as a safety mechanism by installing it at the water meter just as it comes in from your municipal supplier. Proper water pressure on an irrigation system will also help reduce misting and water waste.

    Broken Pipe

    If everything is going along smoothly and the water flow drops to a trickle, there may be a broken pipeline. Major leaks and breaks will cause a dramatic reduction in pressure and flow.
    Are you currently experience extreme fluctuations in water pressure? Contact W.P. Law, and let the experts handle your needs today!

    Five Sizing Considerations When Choosing a Pump for Your Water Feature

    WP Law - Thursday, August 25, 2016
    Water Fountain


    Pumps designed for outdoor fountains and water features are sized by their flow rate and pressure requirements. Water feature pumps are typically high flow and low pressure. Smaller pumps typically measure flow in gallons per hour (GPH), and larger pumps typically use gallons per minute (GPM). But how do you figure out what size your water feature needs? Read on to find out!

    1. Water feature volume.

    Larger volumes need larger pumps. To figure out the volume of a pond or fountain in gallons, multiply its length by width by average depth (all in feet) by 7.5. For a 300-gallon water feature of a type (explained below) that requires water circulation every two hours, you'd look for a pump with a flow rate of 150 GPH.

    2. Water feature type.

    Minimum water circulation frequency (or flow rate) will depend on a few different attributes:
    Water falls and water features with skimmers should circulate once every hour.
    Ponds without fish can have a water circulation rate of once every two hours, while stocked ponds should be at least double that.
    • Water in smaller ponds under 250 gallons should circulate at least once every hour, while larger ponds need a circulation frequency of about half that rate.

    3. Height.

    Fountains and other water features that need extra water pressure will also need stronger pumps, and a pump will have this designated "head height" in its product information. To determine the minimum head height you'll need, measure the vertical height that water must be raised from the pump plus 1/10 of the horizontal distance the water will travel.

    4. Discharge diameter

    If you plan to use a certain tubing size for your water feature (as would be the case when matching the inlet hole of a fountain feature) refer to a pump's rated discharge diameter. The two numbers should match; otherwise, the indicated flow rate will not be accurate.

    5. Livestock.

    Water features that house animals like fish will need more aeration. A larger pump creates greater water circulation and consequently increases both aeration and filtration. Ponds with more powerful pumps can support more fish. 

    A rule of thumb for fishponds is to get a pump that is double the flow otherwise indicated by the other sizing factors. Check out this in-depth article on pond aeration and maintenance for more information.

    Consider contacting us at WP Law if you need help designing, planning, or sourcing materials for a new water feature for your home or business. With over 50 years of experience supplying South Carolina with quality products, you can count on us for the best service around.

    What You Can do to Prevent Excessive Cycling on Your Water Pump

    WP Law - Thursday, August 18, 2016
    Old Fashioned water pump and flowers


    A short cycling a water pump means that the pump shuts on and off too quickly. If you’re having this problem, here are the four most common reasons for short cycling pumps here.

    Insufficient Air Charge In The Water Tank

    Loss of air charge inside your water tank is the most common cause of short cycling. It is an especially common problem for older models and non-bladder type (also called captive air tanks) water pressure tanks. Newer bladder type tanks can also develop this problem when the bladder is damaged.
    Here are three fixes you may need to try (steps 1 and 2 are for non-bladder style tanks)
    1. Repair the tank air volume control.
    2. Drain the water tank and let air re-enter the tank.
    3. Drain the water from the tank and use the air inlet valve to recharge air back into your tank. The air charge should be 2 psi lower than you pump cut-on pressure.

    Defective Water Pump Pressure Control Switch

    Water pressure control switches can fail. Contacts can burn out, and the opening of the switch that detects pressure in the system can get clogged with debris and sediment. This most often appears as a failure of the switch to turn the pump on or off at all, as opposed to just short cycling. The switch may be damaged or need adjustment. This can cause short water-pump cycling. Depending on the severity, you could fix it by either cleaning the switch contacts or replacing the switch entirely.

    Blocked Water Supply Piping

    Clogged piping or water filters can cause short water-pump cycling. The blockage will cause water pressure to rise quickly when the pump switches on. It’s common for people to replace their pump controls only to find that a clogged filter was the real problem. Be sure to check the water supply piping if you have a filter installed on your system.
    If the filter has a bypass valve, open it to see if it stops short cycling. If there’s no bypass valve for the water filter, turn the pump, and the valves around the water filter, off. Then remove your water filter cartridge, clean and reassemble it. If the short cycling stops you’ve likely had a clogged filter. Replace the cartridge.

    Irrigation Zones Are Too Small

    When a pump is used for irrigation and the flow rate is too low, the pump can reach its cut-off pressure very quickly. This is happens most often with small or low flow rate zones such as drip irrigation. This problem can usually be corrected by running the small low flow rate zones simultaneously with another zone. The higher flow rate allows the pump to come on and stay on until the irrigation cycle is completed.

    If your water pump is on the fritz, contact W.P. Law, Inc.

    How Do I calculate The Flow of a Well?

    WP Law - Thursday, July 21, 2016

    A properly functioning well will disperse its contents at the appropriate speed. But, what is the correct flow rate for a well? Whether you own a home that operates on a well or a business that relies on well water, calculating the appropriate flow rate for your well can help you to troubleshoot any potential malfunctions.

    Calculating The Flow Rate For A Well

    Generally speaking, the flow rate of a well is defined by the rate, measured in gallons per minute, that water can be extracted from the well. Measuring this calculation is a fairly simple task as long as you don't have a combination well pump and pressure tank. If you simply need to calculate the flow rate for a standard well, then follow these three steps:

    1. Measure the flow of the well into a bucket.

    2. Be sure to time the flow using an accurate stopwatch.

    3. Divide the gallon size of the bucket by the number of seconds it took for the bucket to be filled, then multiply by 60. This will give you the flow rate measured in gallons per minute (gpm).

    Let's say that you used a five-gallon bucket and that the bucket was filled in 45 seconds. Using the formula outlined above, your well flow rate would be: 5 gallons divided by 45 seconds x 60 = 6.6 gallons per minute.

    If you have a well with a well pump and pressure tank, then you will need to use a different tactic.

    1. Open a faucet until the pump turns on.

    2. As soon as the pump turns on, close the faucet so that the pump can fill up the pressure tank. Once the pump has turned back off, begin step three. 

    3. Open the faucet into a five-gallon bucket. (you may need more than one bucket) Measure the entirety of the water discharge before the pump turns back on. 

    4. As soon as the pump turns on, shut the faucet and use a stopwatch to time the pump cycle.

    5. Make a note of the pump cycle time (round to the nearest second) once the pump has turned back off.

    6. Divide the total number of gallons collected in step three by the number of seconds calculated in step five.

    7. Multiply your answer from step six by 60 to calculate the average pumping capacity, or flow rate, of the pump in gallons per minute. 


    Contacting The Well Experts

    Are you still wondering if your well is flowing at the correct rate? Are you worried that you might have a clog, a damaged valve, or an inefficient well pump? If so, contact the experts at W.P. Law, Inc. W.P. Law specializes in helping customers identify and resolve issues with their well pumps, controls, and pump valves. With the help of W.P. Law, your well can soon be flowing at the correct gallons per minute rate.

    How Do I Know When To Replace The Shaft Seal In My Pump?

    WP Law - Thursday, June 16, 2016
    Pump design

    Wondering if it's time to change the shaft seal on your pump? There are a number of different signs that can help you decide. Regardless of the type of pump you have, here are some simple signs that it needs new gaskets:

    Visual Inspection

    It is very difficult to tell visually if a mechanical shaft seal needs replacing without disassembling the pump. However, you may notice some evidence or prior leaks around the shaft seal or you may see suction and discharge piping that shows evidence of overheating. In either of these cases, it there is a high probability that the shaft seal may need to be replaced.

    Malfunctioning Pump

    If your pump loses prime or fails to build the correct pressure the problem could be a leaking shaft seal. Air may be pulled by a leaking shaft seal causing the pump to lose prime when it is running. This may often be difficult to detect.

    Spraying Leak

    Water spraying by the shaft seal is an obvious sign that the seal needs replacing. When disassembling the ump and removing the old seal, be sure to inspect the shaft sleeve (larger horsepower pumps typically have a replaceable sleeve that the seal runs over). If the pump shaft (or shaft sleeve) has light scratches, they can usually be sanded out with Emory cloth prior to installing a new seal. However, deep grooves or sever scratches mean a replacement shaft sleeve as well.

    If you cannot tell whether or not you need a new seal, bring your pump into W.P. Law, Inc., or contact us today. We can help point you in the right direction and help you find the supplies you need.

    (Infographic) Drip Irrigation Systems

    WP Law - Thursday, March 31, 2016
    Infographic about Drip Irrigation Systems

    Click Image For Larger View

    Drip irrigation systems are an extremely efficient way to water your property without losing water in the process. This infographic shows you all you need to set up a drip irrigation system for your garden, crops, or landscape today!

    How Much Will Installing An Irrigation System Damage My Lawn?

    WP Law - Thursday, November 19, 2015
    Lawn Irrigation System

    If you have a well-established lawn, then chances are you want to keep it healthy and looking great throughout the four seasons. Instead of spending countless tedious hours manually watering your lawn, dragging hoses everywhere, and worrying about what will happen while you are away on vacation, you should consider an automated irrigation system. However, if a fear of damaging your lawn via the installation process is holding you back, then there are a few things that you need to know.

    Steps To Avoid Lawn Damage During Irrigation System Installation

    There are a few precautionary steps that you can take to mitigate damaging your lawn during an irrigation system installation.

    1. Consider the time of year.

    Early spring and fall are the perfect times to install an automated irrigation system. During these seasons the soil has a higher moisture content, which makes digging and restoration processes significantly easier. Additionally, the higher moisture content often means that the soil is healthier and ready to grow new grass in abundance.

    2.Make sure that the type of equipment used matches your specific lawn requirements.

    A trencher and plow (or vibratory plow) are typically used to install an irrigation system. Both types of equipment have their pros and cons; however, the vibratory plow tends to be less destructive to the surface of the lawn. Make sure that you speak with an irrigation expert before you begin to dig.

    3. Set aside established grass and sod should be carefully set aside.

    If you have established grass or sod, there is no reason that it should be damaged when you install an irrigation system. Ask your chosen irrigation expert to carefully set the grass or sod aside. During the excavation process, the dirt should be set aside on a piece of plywood or tarp, which will make the burial process much easier and cleaner. After the installation is complete, left over dirt should be buried or carried away, so that the sod and grass can be gently replanted.

    4. Make sure that you soak the entire lawn afterwards.

    After your automated irrigation system has been installed, it is a great idea to thoroughly soak the entire lawn. The additional water will help new seed take root, and it will minimize any additional stress to the lawn.

    With these helpful tips in mind, your lawn can be protected while you install a convenient automated irrigation system. To learn more about irrigation installation tips, or for help choosing the perfect system for your lawn, contact a member of W.P. Law today!

    Is Your Pump to Blame for Your Irrigation Issues?

    WP Law - Friday, October 02, 2015

    Click Image for Larger View

    Pump Repair and Fabrication Infographic

    If you’re experiencing irrigation issues, trying to diagnose the cause of the problem can become quite frustrating. While not always the case, sometimes your pump may be to blame. Find out if that’s the case for you, this time, by checking out these simple steps.

    1. Turn off the power.
    2. Follow priming procedures for your pump.
    3. Inspect the pump.
    4. Clear any obstructions.
    5. Check the plugs.
    6. Restore power.
    7. Observe if operation is normal.

    What determines if fabrication should be done in the field or in a shop?

    WP Law - Thursday, October 01, 2015
    Pipe Fabrication

    Pipe fabrication is the process of customizing or manufacturing a pre-designed piping system to meet a specific use. A custom fabricated piping component is often created to connect to an existing piping system. The type of pipe and other materials being used are dependent upon the application. While most projects can be completed in the controlled environment of a shop facility, sometimes fabrication in the field is required to best meet the customer’s needs.

    Advantages of Shop Fabrication

    There are several advantages to conducting shop fabrication.

    • Fabrication occurs in a controlled environment which allows for greater accuracy and efficiency regardless of weather conditions.
    • Items can be tested before they are installed.
    • There are no mobilization costs associated with shop fabrication. You only have to pay to ship the fabricated components.
    • Reduced costs throughout the process.
    • Increased safety for workers.

    Disadvantages of Shop Fabrication

    There are a few disadvantages to conducting shop fabrication which include:

    • Accurate dimensions are required if the fabricated component is being used as a replacement for an existing component.
    • If components are being supplied by different manufacturers, sometimes it is better to see what you are working with before you start the fabrication process.

    Advantages of Field Fabrication

    Here are some advantages of field fabrication:

    • Field fabrication is preferred if there are a lot of unknowns, such as the location of pumping equipment.
    • Field fabrication may be the only option if the item being repaired or replaced cannot be easily taken to a shop facility.

    Disadvantages of Field Fabrication

    There are several potential disadvantages of field fabrication, which can cause some individuals to prefer shop fabrication techniques.

    • Weather can be a huge disadvantage, especially when the facility under construction is not properly enclosed or protected from the elements.
    • Field fabrication is sometimes less efficient and cost effective, when compared to shop fabrication.
    • There are increased safety concerns.

    With these advantages in disadvantage in mind, it is clear that choosing between a field or shop fabrication will depend on the circumstances surrounding the work area. From weather conditions to pipe conditions, safety and security should always be evaluated before choosing a fabrication method. To learn more about the advantages and disadvantages of shop vs. field fabrication, contact an expert at W. P. Law, Inc. For over 40 years W. P. Law has been one of the Southeast's leading suppliers of fluid handling equipment for farmers, contractors, and industries.

    Can I set up my landscape lights on a timer?

    WP Law - Thursday, September 17, 2015
    Exterior of a home illuminated by landscape lighting at night

    As the summer sun begins to fade away, it is time to reconsider the effectiveness of your landscape lighting . When the sun was staying out late, and the moon seemed to keep your yard lit with glowing light, you could afford to turn on your outdoor lights later in the night. However, as the fall rapidly approaches it is time to save yourself the hassle of manually turning on your lights, and instead rely on an automatic timer.

    Adjusting Landscape Lights

    Most lighting systems are equipped with a lighting transformer. This transformer will need to be adjusted, so that your lights automatically turn on when you need them. To adjust the timer, follow these simple guidelines.

    1. Safely open the transformer.
    2. Find the timer and unplug it. While there are different styles of timers, the most common timers will have red and green clips or feature push buttons.
    3. A push style timer will require you to change the time via the tabs. Simply pull the tabs in or push them out to the desired time.
    4. The red and green clip style uses the green clip to indicate when the lights will turn on and the red clip for when the lights will turn off. Simply slide the clips to the correct timeframe.
    5. Be sure to check that you have adjusted the timer correctly for A.M. or P.M.
    6. Set the timer to the current time.
    7. Plug the timer back in.
    8. Close the transformer and voila, you are done!

    Once you have successfully set your landscape lighting you can simply wait until it is dark to make sure that your lights are coming on at the desired time. Adjust as needed, based on seasonal conditions and personal preferences.

    To discover additional landscape lighting tips, be sure to contact the experts at W.P. Law. Since 1970, W.P. Law has been helping homeowners and businesses transform their outdoor spaces into beautifully lit oases. To discover alternative landscape timer solutions, contact a W.P. Law team member today.

    What are the advantages of using a submersible pump?

    WP Law - Thursday, September 03, 2015

    Tips to Figuring Out Why Pop-Up Sprinkler Heads Aren't Working

    A submersible pump

    A submersible pump works in a similar fashion to a standard pump, in that it helps move liquid from one location to another. However, a submersible pump also has the added benefit of being able to work even when it is placed underwater. Submersible pumps are generally used for drainage, slurry, and sewage pumping. There are also submersible water pumps, which can be used for a variety of tasks within the household.

    Top Benefits to Submersible Pumps

    The submersible pump has a multitude of benefits that make it a top pumping choice.

  • Convenient and easy to use. -- Submersible water pumps are lightweight, small in size, and portable, which makes them both convenient and easy to use. You can take them where you need them and easily install them when needed, which will save you time and money.
  • Submersible pumps are efficient. -- The submersible pump works directly at the source, which means that it typically has to use less effort to pump the liquid(s).
  • Submersible pumps tend to be corrosion resistant. -- One of the top benefits of high-end submersible pumps is that they are corrosion resistant, which means that you can save money avoiding costly repairs. Corrosion resistant submersible pumps are usually made from stainless steel components.
  • There are a wide variety of submersible pumps . -- There are many different types of submersible pumps, which make it easier to find the pump that is best suited for your unique pumping needs. While some submersible pumps need to be completely submerged, others can work while they are half submerged. There are also submersible pumps that can handle both liquids and solids.

  • To learn more about the unique advantages of using a submersible pump, contact the experts at W.P. Law. Since 1970, W.P. Law has been providing expert advice, services, and products. Discover the ideal submersible pump to meet your water, drainage, slurry, or sewage pumping needs.

    Why aren’t my pop-up sprinkler heads working?

    WP Law - Thursday, July 16, 2015

    Tips to Figuring Out Why Pop-Up Sprinkler Heads Aren't Working

    Sprinkler System

    During the hot summer months, nothing is worse than going to turn on your sprinkler, waiting to see the gush of cooling water, and slowly realizing that your woes have just begun because water isn't coming out. From a broken line to a cracked sprinkler head, there are several reasons why your pop-up sprinkler heads are failing to work. To help you resolve your current predicament, we have gathered together a few helpful tips.

    If your pop-up sprinkler head isn't working, you might need to look at more than one component of your sprinkler system. The following tips will guide you as you play Sherlock Holmes to figure out a solution to your sprinkler issue.

  • Find any broken sprinkler heads. -- A broken sprinkler head is one of the most common reasons that your pop-up sprinkler heads do not work properly, even when the water is turned on at a full blast. Broken sprinkler heads are easy to identify. Simply look for cracked casings, broken plastic pieces, or heads that refuse to pop-up out of the ground. Once you have found a broken sprinkler head, you should replace it with a new model.
  • Check to see if your sprinkler heads are super dirty. -- When a sprinkler head is clogged with dirt or other debris, it will soon fail to rise completely out of the ground. To resolve this issue, simply clean the sprinkler heads. Be sure to clean both the head and the plastic screen basket.
  • Is your water pressure too low? -- Low water pressure is not only a nuisance, but it can also cause the sprinkler heads to stay buried in the ground. To resolve this issue, check to make sure that the valves on your backflow device are fully open. A fully open valve will provide the highest water pressure.
  • Check for any leaks in the water line. -- A leak in the water line can cause low water pressure and keep water from flowing to the sprinkler head. If water doesn't reach the sprinkler head, then it won't pop-up out of the ground.

  • If, after exhausting these top tips, you're still having issues with your pop-up sprinkler heads, we invite you to contact our team of experts at W. P. Law, Inc. We would be happy to help you further troubleshoot the sprinkler issue or purchase a new sprinkler head to more easily meet your watering needs.

    Is my drainage system overloading my sump pump?

    WP Law - Thursday, July 02, 2015

    When you need to troubleshoot your irrigation pump, here are some options to consider in the process:

    Sump Pump

    Are you worried that your drainage system is causing your sewage or sump pump to be overworked? Have you begun to envision water seeping into your basement? Before you begin to panic, read the rest of this post. We have gathered together the top three causes for sump pump or sewage pump overload.

    Top Three Signs Your Sump Pump Has Reached Capacity

    Before your sump pump fails right when you need it most, here are three telltale signs.

    1. Power Failure

    A power outage is one of the most common signs that a sump pump has failed. To prevent this disastrous situation, make sure that you install a back-up generator to operate your sump pump in case of a power outage.

    2. The Sump Pump is the Wrong Size

    If a sump pump is the wrong size, then it will be easily overworked. When the pump is too large, it can turn on and off too frequently and short-cycle, which results in a shorter product lifespan. However, if your sump pump is too small for the tasks at hand, then you won't be able to adequately remove the water. To find the perfect sized sump pump ask for help from a team of experts, like W.P. Law, Inc.

    3. Lack of Maintenance

    A sump pump that has been neglected is bound to break down when you need it most. Keep the following maintenance tips in mind, so that your sump pump can continue to function properly.

    • Test your sump pump on a regular basis. Make sure that it is properly discharging water.
    • Make sure that the operation of the float is not restricted.
    • Double check that the air hole in the discharge line is clean.
    • Replace the battery on your back-up sump pump every two years.
    • Listen for any unusual sounds when the motor is running.
    • Follow all listed manufacturer maintenance instructions.

    Before, during, and after periods of heavy rainfall make sure that your drainage system is not over working your sump pump. By taking these precautionary measures, you can keep your sump pump properly functioning for years to come. To learn more about installing a sump pump, or to answer any additional drainage system questions, contact a member of W.P. Law today. The W.P. Law team of drainage experts is standing by to answer any of your questions.

    Why is the water pump for my irrigation system not turning on?

    WP Law - Thursday, June 04, 2015

    When you need to troubleshoot your irrigation pump, here are some options to consider in the process:

    Sprinkler

    When you're trying to keep your irrigation working well, there are few things as frustrating as water pump problems. What's wrong with it? Why won't it work? Here are some great ideas on troubleshooting your irrigation system's water pump:

    There's no power getting to the pump.

    If the pump is not turning on at all, you may want to start with the obvious and check to make sure the breaker is not turned off or tripped. If you reset a tripped breaker and it continues to trip, you may have an issue with the wire running to the pump or the pump motor itself. Other possibilities include the irrigation controller and/or pump start relay. Most irrigation controllers use an external pump start relay to send power to the pump. The irrigation controller sends a 24 VAC signal to the pump start relay. This 24 VAC signal energizes a coil that pulls in a set of contacts that completes the high voltage (usually 240 VAC) circuit and sends power to the pump motor. If the coil or contacts on the pump start relay are bad then the pump will not run. Likewise, if the irrigation controller is not sending that 24 VAC signal to the pump start relay, then the pump will not run. When dealing with electrical issues it is best to contact a qualified irrigation contractor or a licensed electrician.

    The pump has lost prime.

    All centrifugal pumps need to be primed. Yes, even “self-priming” pumps. “Priming” a pump simply means filling the pump casing and suction piping with water and ensuring that there is no air in the suction piping. Even “self-priming” pumps need at least their pump casings filled with water before they will pump. If a pump repeated loses prime between irrigation cycles, it probably means you have a leaking foot valve.

    Suction lift is too high.

    If your irrigation pump has been working fine and now seems to be struggling, you may need to check the suction lift. This can be a common problem during prolonged droughts when lake levels drop. The suction lift is the vertical distance between the water surface and the pump inlet. The friction losses through the suction piping and foot valve are also included in this calculation. Many times when the suction lift is getting too high the pump will sound like it has rocks in it. This noise is cavitation, which can literally destroy the internal components of the pump. If the pump’s suction lift is too high, you may be able to temporarily relocate your pump closer to the water source to remedy this problem.

    There's a blockage in the system.

    Another reason your pump may be performing poorly is that the foot valve or the impeller may have blockages. Moss, leaves, and other debris can be drawn next to the intake screen on your foot valve restricting the amount of water that you pump can deliver. This also causes the suction lift to increase and may cause cavitation. The pump impeller can also become blocked with small particles such as pebbles and sand. Sometimes these small particles can pass through the intake screen and become lodged in the impeller vanes causing the pump performance to suffer.

    Now that you know what to look for, it's time to troubleshoot your system. For a more comprehensive pump troubleshooting guide visit our website. Contact us with any additional questions or to request help from our team of professionals.

    What is the best fertilizer for my lawn?

    WP Law - Thursday, April 16, 2015

    When it comes to feeding your lawn, it can be really hard to figure out which fertilizer will do the job.

    Lawn Fertilizer

    Do you need immediate results or slow release? Micronutrients or more general fertilizer? Sprayed or broadcast? Unfortunately, because all lawns are a little bit different, the answer is different.

    Start with a soil test

    The best place to start when determining which fertilizer will work best is obtaining a good soil test. Take a soil sample that includes soil from several areas of your lawn, taking soil from 4-6" deep, the average depth of turf grass roots. Put the soil into a quart size plastic bag, and take it to your county's extension office, operated by your state's land grant college. Typically running between $10-30, the soil test will provide you with a report that has very specific details of what your lawn needs in terms of fertilizer. W. P. Law, Inc. also offers this service as well.

    Set up a seasonal schedule

    Though it's not something we often take into account when we think about fertilizing a lawn, a schedule is important. Well maintained landscapes, golf courses, athletic fields and even your neighborhood's "Yard of the Month" do not look spectacular because someone makes one fertilizer application every spring. Maintaining a healthy lawn usually requires some type of application every month or so. Sometimes this application is fertilizer, other times it is an application of pre-emergent herbicide or a fungicide. An easy way to keep on top of things is to sign up for a reminder email from W. P. Law, Inc. Every time your lawn needs something seasonal, you will get a simple email reminding you what to do and when you need to do it. To subscribe to this free service click here.

    Select a fertilizer

    Now that you know what your lawn needs and how often you can apply it, it's time to select a fertilizer. Choose a fertilizer that has a ratio of nutrients in line with your soil test report and can be applied according to your schedule. You can also talk to a professional at W. P. Law, Inc. about our organic soil amendments as well.

    The last thing to look at is lime. If your soil test report recommends a certain amount of lime to adjust your lawn's pH, make sure you apply it for the healthiest lawn.

    Now that you've had an opportunity to determine the best fertilizer for your lawn, it's time to get to work. Get a soil test, pick a fertilizer, and put it into play. If you need tools, fertilizers or other lawn care needs, please feel free to contact us.

    How to know when it’s time to replace your pump control valve.

    WP Law - Thursday, April 02, 2015

    When you are maintaining or repairing your pumping system for irrigation, waste water, sewage lift, filtration, or any other use, some of the most critical parts of the pump station are the valves.

    Pump Control Valve

    To the untrained eye, every valve is the same. As long as the valve is in one piece, it is probably working correctly, right? Wrong! Control valves can break or work improperly—even if they look to be solid. While every case is a little different, here are a few tips for determining if your pump station control valves may need replacing:

    • Look for Leaks - While a significant leak would be apparent, smaller leaks may sneak up on you. Check around the pump control valve and look for leaks around control water tubing and indicator stem. Small leaks around these areas are easily repaired.
    • Rust - A rusted valve or corroded valve can be a disaster waiting to happen, especially in industrial or municipal applications. A rusted valve is usually a sign of leakage or other external corrosion. Depending on the type of fluid being pumped, external corrosion could be indicative of internal corrosion. Valve corrosion can cause the valve to be inoperable, which could be big trouble in the case of an emergency. Replacing the valve right away could prevent serious, expensive repairs down the line.
    • Noisy Pump - If your pump seems to be making more noise than usual or if it sounds like it has rocks in it, and these sounds are more noticeable than in the past, the pump control valve may not be working properly. Pump control valves can regulate the flow. A control valve that allows excessive flow may cause pump cavitation which can lead to expensive repairs.

    Proper maintenance is important when you have a pump station or multiple pumps working to keep water circulating on your property or within your building. No one expects you to know it all yourself. If you have questions or concerns about pump control valves, installing a new pump, or general maintenance of any type, why not call the experts? The team at W.P. Law Incorporated have the knowledge and expertise to help you with all of your fluid handling needs. Call us or reach out to us online, and we will be happy to point you into the right direction. We look forward to assisting you with all your pump and fluid handling needs.

    When should I fertilize my lawn?

    WP Law - Thursday, March 19, 2015

    Establishing a solid fertilizing schedule is important for the health of your lawn.

    Irrigation System

    Believe it or not, the heat of the summer is just a few short weeks away. Before you know it, your grass plants will be battling the intense sun and humidity that are hallmarks of summers in the southeastern U.S. That means they'll be stressed – really stressed – and unless you take action now, your lawn could be a sea of brown by the time mid-July rolls around.

    The best way to prepare your lawn to withstand the rigors of summer weather is to fertilize it the right way so roots are encouraged to grow strong and deep. Different types of grass do best when fertilized at specific times.

    Fertilizing Schedule

    Fortunately, we can help. Here's what you need to know month-by-month so you can time your lawn fertilizer application for optimal results:

    • February: Tall fescue beats out other grass types in terms of fertilizer timing. This grass likes an early dose of complete fertilizer such as 12-4-8 or 16-4-8, applied at a rate of ½ pound to a pound per 1,000ft2 of lawn.
    • April: A light application of iron can help intensify green color of centipedegrass and St. Augustine grass when applied this month.
    • May: The fertilizing season begins in earnest! Bermudagrass, carpetgrass, centipedegrass, St. Augustine grass, and Zoysia all benefit from a complete fertilizer this month to get them off to a great start.
    • June: Bermudagrass will appreciate an application of a water-soluble, inorganic form of nitrogen, such as ammonium sulfate or ammonium nitrate.
    • July: Apply that inorganic nitrogen product to Zoysia this month; apply iron to centipedegrass to increase its green hue.
    • August: This is the month for a second application of a complete fertilizer to Bermudagrass, carpetgrass, centipedegrass, St. Augustine grass, and Zoysia.
    • September: This month, apply a second application of complete fertilizer to tall fescue; St. Augustine grass will benefit from a second application of iron.
    • November: Tall fescue gets its third application of complete fertilizer to help it through the winter months.

    Give us a call.

    At W.P. Law, we offer a comprehensive range of fertilizers for all grass types, and we can help you set up an optimal feeding schedule for your lawn. So give us a call: The better root system your grass plants have, the better they'll be able to draw up the water and nutrients they need to stay healthy, no matter what Mother Nature throws their way.

    How Do I Install an Irrigation System in my Yard?

    WP Law - Thursday, February 19, 2015

    Here are a few things to consider when planning an irrigation system installation.

    Irrigation System

    Whether you're trying to reduce water consumption, increase home automation, or just have an amazing-looking lawn, installing an irrigation system can make a huge difference to your home's appearance and value. But what happens during an irrigation system installation? How do you go about installing an irrigation system for your yard? Here are some things to consider when planning an irrigation system installation:

    Considerations when Planning Your System

    When you're planning your irrigation system, there are several things to keep in mind. At a minimum, you'll want to consider the sprinkler heads you're planning on using, how much area they'll cover, and the spacing distance. You'll need to plan accordingly.

    Should you be worried about water siphoning back through the irrigation system and contaminating your water supply? Definitely! An anti-siphon valve or other back flow preventer will help you avoid this issue in your new system.

    Are you setting up an automated system? Will it be controlled by weather readings or time settings? You can set up an automated system to water at particular intervals, but if you can afford it, a system that is controlled based on temperature, humidity, rainfall, and wind speed can help save water and money.

    Are you planning on injecting chemicals, such as fertilizers and pesticides, into your system so that they can be applied while your lawn is being watered? If so, you'll need to plan an injector and its components into your design.

    Impact on Your Lawn

    When you're ready to start your installation, remember the impact this can have on your lawn. The very first step is to mark out any underground utility lines such as power, gas, sewer, and communications. You'll need to dig channels for the pipes and sprinkler risers to fit in. While you're digging, you may want to consider fixing problem drainage areas by including drain tile and similar features.

    To help your lawn recover as quickly as possible, try cutting the turf you'll need to remove and leaving it in place until you're actually ready for the installation. Then you can simply tip the turf out of the hole, add the new components and fit the turf back in. If you're using a power tool such as a ditch witch or mini excavator, having some turf on hand to replace the damaged areas makes it easy to get your beautiful lawn back quickly.

    Installing an irrigation system can seem tricky. At WP Law, we're here to help you install an irrigation system that will keep you yard looking beautiful. Contact us today for a consultation.

    When would I want to use sub-surface drip irrigation versus regular drip irrigation?

    WP Law - Monday, January 19, 2015

    Factors to consider when choosing methods of irrigation.

    Plants with Irrigation System

    When it comes to improving the efficiency and the usage of drip irrigation, we find that sub-surface drip irrigation offers several advantages over a standard drip irrigation system in certain situations. Although both systems will use intermittent drips to maximize the use of water in agriculture, the sub-surface system can sometimes help with cost reduction and higher profits.

    Higher levels of efficiency in open fields

    When the irrigation system is below the surface, the surface of the coil remains dry. This will reduce the amount of water that is lost because of evaporation and runoff. This is even true early in the season when the threat of evaporation increases because of the bare soil. This will allow you to reduce the amount of water waste, which will in turn reduce your costs associated with producing the crops.

    Sub-surface systems also operate with smaller flow rates than surface systems. Although the overall energy consumption of the system will depend upon factors such as flow rates, pumping depth, and pressure, a well-designed system should be able to help you reduce the energy needed to operate the system. This will further reduce your production costs.

    Impact on labor for large operations

    According to the University of Nebraska, the amount of labor associated running and maintaining a sub-surface drip irrigation system is less than a surface system.

    Sub-surface systems reduce the growth of weeds, especially in areas that are generally drier. This is particularly true for weeds that have shallow roots, since these roots will not reach the water source below the surface. This will reduce the work that needs to be done in the field and can potentially lead to higher crop yields at the end of the season.

    There are considerable advantages associated with daily field maintenance tasks. When the surface of the soil remains drier, agricultural equipment will be able to work in the field even when the plants are being watered. This can help reduce downtime and help the farm run more efficiently. Higher efficiency will reduce labor costs, saving you money.

    The sub-surface irrigation system can offer considerable benefits for those in agriculture. The water efficiency and the impact on labor make it possible for owners to recuperate their initial investments quickly while also improving the overall function of their farms. If you are interested in learning more about how one of these systems can help you, contact us at WP Law, Inc for a consultation. We would be happy to help answer any questions you have.

    3 Steps to Winterize Your Automatic Watering System

    WP Law - Wednesday, November 05, 2014
    frozen watering system

    How to protect your automatic watering system from harsh winter weather

    Protecting your automatic watering system in the winter is important to protect your investment, and ensure your system will be ready when needed. Sprinkler systems should be winterized before the first winter freeze.

    Here are three steps for winterizing your automatic watering system:

    1. Turn off the water: You’ll need to shut off the water supply at the main valve.
    2. Turn off the controller: Turn the controller or timer off.
    3. Remove the water: All of the water needs to be removed from the entire system. If you have an air compressor, you can blow the water out using the compressor. To do this, you need to close both valves on the system’s backflow preventer. Next, remove the plug on the blow-out and connect the hose adapter of an air compressor. Open each valve one at a time and turn the compressor on, gradually increase the air, but don’t let it get over 50 psi. Once the water is removed, repeat the process until each valve is blown out.

    If you’re not comfortable winterizing your sprinkler system, contact the irrigation experts at W. P. Law, Inc.

    Dream It, Do It! How to DIY Your Garden Irrigation

    WP Law - Monday, June 02, 2014

    Garden Irrigation as Easy as 1-2-3

    Dream It, Do It! How to DIY Your Garden Irrigation
    Gardening irrigation makes gardening more fun and fruitful. Growing a backyard garden is not just fun – it’s also practical, especially if you are trying to avoid GMO foods or save money by growing your own fresh fruits and vegetables. Garden irrigation helps to decrease the amount of work involved. Thankfully, DIY irrigation is easy.

    DIY irrigation kits you buy are complete. The instructions are fairly simple and straightforward. The only task you really do on your own is design the layout. Here’s a simple tip to take care of it:

    Map It Out!

    Take the time to map out and plan your garden. Include several versions for change-of-season gardening. This will help you see exactly what irrigation supplies you need. It will also show you where irrigation can be moved to later if you wind up expanding. The map is important; it allows you to plan the layout of your garden in a way that conserves both work and water.

    For example, if you don’t garden in winter, then plant crops harvested first at the end of the irrigation line. By installing a simple shut-off valve, you can shut off sections of irrigation line once a crop is done for the season.

    Mapping out the garden allows you to envision the entire process. You get the benefit of noting any problems with irrigation before the system is established and ordered. Just follow the instructions in your DIY irrigation kit, and you can have a beautiful garden.

    If you'd like more information about how DIY garden irrigation kits can help your garden, just contact us.

    What Landscape Professionals Are Saying About Watering Systems

    WP Law - Monday, April 21, 2014

    Watering Systems Cut Costs and Water Waste

    What Landscape Professionals Are Saying About Watering Systems

    Water management systems are becoming mandated in certain areas. The expanding drought across the western United States is creating water stress in many places not normally prone to water shortages. These communities are going to have to make do with less water. But what can the right watering system do to help?

    The Rising Cost of Water

    Let’s examine an example of this “making do” water situation. In Sacramento, CA, in the middle of December, water restrictions are put into place. During this time, the volume of water in the Folsom Dam is less than 20 percent capacity.

    Most of California has a Mediterranean climate, which means hot dry summers offset by cool wet winters. The rainy season begins in October and usually ends in March. During the wettest part of the year, water is now scarce in Sacramento.

    Late rains in February soak the ground, but they don’t do much for solving the oncoming water problems that will be faced during the summer. Snow in the mountains feeds the rivers. Unfortunately, there isn’t much.

    This is the story all across the West, but it’s no different in the Southeast. Homeowners, gardeners, and farmers have to adapt to what may be a 14-year drought. Watering systems should be installed to help conserve the supplies available. The longer we wait to address this problem, the higher the cost of water is going to rise and the more each of us will pay for basic necessities.

    Want to learn more about the ways watering systems can benefit you? Contact us online. Our experts are happy to answer any of your questions.

    What to Know About Landscape Products, for Rookies

    WP Law - Monday, November 25, 2013

    Landscape Products can Fix Lawn Problems in a Snap


    What to Know About Landscape Products, for Rookies

    Landscaping products may seem confusing when you first start out, but many of these items are designed to save you time, money, and the labor needed to make your landscape turn out beautifully. Here are a few key focal points to make your next outdoor project a smash hit.

    Watering and Irrigation

    Proper watering is important to making your landscape look its best. There are many products available from DIY drip kits that allow you to irrigate that small container garden to “smart” irrigation controllers that can determine how long they need to irrigate.

    DIY Drip kits come in a wide range of sizes that can cover a small vegetable garden to kits that contain hundreds of components that allow the homeowner to irrigate an entire landscape.

    Smart controllers utilize on-site mini weather stations that take recent rainfall, relative humidity and temperature into account and calculate how long they need to operate. These controllers also consider the soil type and plant material when determining system run time.

    Plant Care

    Thanks in part to products like liquid fertilizers and irrigation systems that deliver pest control, modern plant care is much simpler than in the past. Whether you are caring for a lawn system or a garden, the ability to spread fertilizers easily with minimal effort is priceless. Couple that benefit with accurate pest control methods, and with the ability to control it all from the convenience of your desk.

    Professional landscapers understand how best to put these landscape products to use to save time, money, and labor. Contact WP Law, Inc. and let us help save you money while creating beautiful areas outside your home.

    The Importance of Irrigation System Design

    WP Law - Monday, November 18, 2013

    Irrigation System Design Basics


    The Importance of Irrigation System Design

    The importance of your irrigation system design can't be exaggerated. How you piece your system together impacts how well it works, how much it costs to build and maintain, and how easy it is to expand in the future. It's the number one factor when considering the long-term value of your new irrigation system. Consider the following to get the most bang for your buck.

    Initial costs are a small investment when you consider the overall life of your system. A good irrigation system design allows for proper coverage, easy maintenance, and ensures water in conserved. A good design also takes into account how the system will be installed and tries to route piping where trenching will cause the least amount of disturbance to the existing landscape.

    Design should also address the issue of expandability by leaving the door open for easy changes and additions. You should put together your system with the future in mind. Building your initial irrigation system in a way that allows for easy expansion will cut down time and money when it comes time to add on.

    If you are researching a project that involves irrigation system design and would like more information about how a good design can help you to lower long-term costs, contact WP Law, Inc. Our team of professionals can help you discover new options and new technology that can make your project better in its first year and far into the future.

    Take the Mystery Out of DIY Irrigation with These 2 Tips from the Experts

    WP Law - Thursday, November 14, 2013

    Save Money without Sacrificing Quality with Tips on DIY Irrigation


    Take the Mystery Out of DIY Irrigation with These 2 Tips from the Experts

    Get started with DIY irrigation by working against two common issues that plague at-home setups. They can make or break your attempt, and lead to a lush garden and lawn or spotty, dying vegetation. Get a head start on success by following these easy tips.

    First, when installing a drip irrigation system, always install a filter and pressure regulator. The number one problem with drip irrigation is plugged emitters. This can easily be prevented by using a wye filter with a 155 mesh screen. It is so much easier to periodically clean one filter screen than replace hundreds of emitter. Pressure regulators are also a must with drip irrigation systems. Emitters are designed to operate within a specified pressure range. If the pressure is too high then the emitters don not apply the specified amount of water and their operational life is reduced.

    Our second tip relates to irrigation system design. Check your water pressure and flow rate before you install a system. Too many times we have seen systems installed that have too many sprinklers on a zone. In these cases the sprinklers barely pop-up and the coverage is horrible. This problem could have been avoided if the water pressure and flow rate had been known. If you live in an area that has low water pressure, a booster pump can be installed to increase the pressure and make your system function properly.

    If you'd like more information and tips for installing DIY irrigation systems, please contact us today. Any of our irrigation specialists will be happy to help you pick the right system for your job, and give you tips to help you install it like a pro.

    The 3 Best Things About Professional Irrigation System Installation

    WP Law - Monday, November 04, 2013

    Easy Irrigation Installation


    The 3 Best Things About Professional Irrigation System Installation

    Professional irrigation system installation offers the following three benefits:

    1. Provides proper watering for your lawn and landscape.
    2. Reduced maintenance and repairs.
    3. Provides peace of mind.

    Let’s explore how these three benefits can save you time, money, and labor.

    A quality professional irrigation system installation includes the proper selection and spacing of the sprinkler heads. By selecting the correct sprinkler head and installing it at the correct spacing the contractor ensures that your lawn will be watered evenly and efficiently. A professional contractor will also set up your irrigation controller on a proper irrigation schedule to help prevent over watering.

    Proper installation of all of the components of your system, including pipes, valves, sprinkler heads, control wire, backflow preventer, and controller, will help reduce system down time and repairs due to damage from freezing weather. Proper installation can also reduce sprinkler head damage due to lawn mowers and edgers.

    The best thing about using a professional irrigation contractor to install your sprinkler system is that a reputable contractor will always stand behind their work. This should give you peace of mind knowing that your irrigation system will provide years of trouble free service.

    Ask the pros at WP Law, Inc. to recommend a qualified irrigation professional in your area to install your next project.

    A Beginner's Guide to the Easiest DIY Irrigation System

    WP Law - Thursday, October 10, 2013

    Yes, you can install a DIY irrigation system.

    A Beginner's Guide to the Easiest DIY Irrigation System
    There is no reason to fear a DIY irrigation system any longer. The technology that has gone into manufacturing irrigation kits has made the process much simpler and straight forward than they were even just a few years ago.

    The best thing to do when you buy a kit is to get to know all of the parts. It may seem as though there are a million pieces, but there are really just a handful of different parts. Understanding what those parts are will make putting the system together a much easier task.

    The next thing to do is to make sure you have all of the tools that you need. A quality DIY irrigation system kit will tell you on the package what tools are required. The right tool always makes the job a lot easier.

    The beautiful thing about irrigation system kits is that you get to decide where stuff goes. Most kits are versatile enough to allow you the flexibility to change things to suit your individual application.

    For the answers to all your questions about your new DIY irrigation system, ask the specialists at W. P. Law, Inc. at www.wplawinc.com/corporate-contact.

    2 Agriculture Irrigation System Ideas You Can Use

    WP Law - Thursday, October 03, 2013

    You can use agriculture irrigation systems at home to benefit your landscape and special projects.

    2 Agriculture Irrigation System Ideas You Can Use

    There are a lot of ideas that cross over between the home-based garden and commercial agriculture; two such specialized areas are crops and automated irrigation systems. Some of the world’s largest farms use automated systems for their irrigation. Consider scaling this system to fit your personalized irrigation needs. The gateway to the best landscape is through innovation.

    1. Specialized crops, small or large.
    The greatest idea we transferred from agriculture irrigation systems is the understanding that smaller growing projects can benefit from the designs of larger agriculture projects. For instances, many homeowners have the desire to grow grapes and other specialized crops. Using the ideas behind specialized commercial irrigation systems designed for vineyards can be scaled back to fit your home based vineyard. Whether you want to grow a handful of grapes or acre of grapes, there are specialized irrigation systems just for your project, and other specialized projects as well.

    2. Full management features of your irrigation system.
    Home gardeners no longer have to rely on just drip irrigation and a timer; there are systems available that allow you to have full control over how and when your landscape and gardens are watered. Control systems help by saving you time and labor. Consider adding in products that sense the weather and skip watering when it is raining or increase watering when the soil is dry. Systems will also allow you to connect directly from your computer and implement changes to your system without having to leave your office. Those features are available for homes as well as commercial agriculture.

    For additional information on how agricultural applications can work for you at home visit the expert team of professionals from WP Law, Inc. at www.wplawinc.com/corporate-contact.

    How to Choose the Right Watering System for Your Landscaping

    WP Law - Monday, September 30, 2013

    Finding the Best Watering System for your Landscape

    How to Choose the Right Watering System for Your Landscaping

    Which type of watering system is the best for your landscape? The question is really about what kind of watering your landscape needs.

    Lawns for example, are best watered with pop-up sprinkler heads that retract below the lawns surface. These sprinklers are typically spaced 30 feet apart for large lawn areas. Small pop-up spray heads are used for small or odd shaped lawn areas.

    A vegetable garden, on the other hand, is usually planted in straight rows. Ideally you only want to water the plants and not everything in between. Garden drip kits that use drip tape are ideal for this application. The drip tape is stretched out along the row and water is emitted every 12 inches thus creating a continuously wetted strip along the row leaving the path between rows dry. Not only does this save water, but it also reduces weeds and by keeping the foliage dry many disease problems are eliminated.

    Foundation plantings and other ornamental beds where plants may be placed in random patterns require an irrigation system that is easily adaptable. Drip irrigation systems that use emitters and micro-sprinklers serve this application well. The drip tubing is usually run in close proximity to the plant and an emitter is punched into the tubing. Water is applied at a predetermined rate based on the emitter selection. Micro-sprinklers work well in annual beds where plants will be changed out during the different seasons. Bedding plants usually have shallow roots and are easily watered with a few micro-sprinklers. These systems have the same benefits as those used in irrigating gardens.

    As you try to decide which watering system is the best one for your landscaping needs, ask yourself what it is that you are trying to grow. That answer will help you figure out which type of system is best for you and your landscape.

    Consult the landscape professionals at WP Law. Our expert staff will help you find the best watering system for your unique situation.

    3 Favorite Landscape Products

    WP Law - Monday, September 16, 2013

    3 Popular Landscape Products

    3 Favorite Landscape Products

    The world of landscaping is crammed full of products. Choosing a favorite can be difficult. To make this job easier, focus on three things: which products save you money, time, and labor.

    While yard work can be a labor of love, most of us prefer to love our yard while relaxing in it. Here are our three favorite landscape products.

    1. Drip Irrigation:
    Drip irrigation is a product that can save you time and money. Because drip irrigation applies water directly to the plant’s root zone water is not wasted. Drip irrigation can also be easily incorporated and used with containers and planters as well. Drip irrigation systems are easily automated so watering your plants never has to be a concern.

    2. Outdoor Kitchens:
    Outdoor kitchens are truly an element of style. They add value to your home. They bring the art of entertaining outdoors, which means that you can enjoy your party without having to be inside cooking. They are spacious enough that the whole family to work can help prepare the meal.

    3. Landscape lighting:
    Landscape lighting adds a beauty and ambiance to your landscape without costing a fortune. If done correctly, the payoff is well worth the expense. Better LED technology allows these systems to have the same warm light as halogen bulbs but at a fraction of the electrical cost.

    Look to WP Law for the best landscape products. We have products to fit all of your landscape needs.

    3 Things Landscape Professionals Will Tell You about Landscape Irrigation

    WP Law - Monday, September 02, 2013

    Landscape Irrigation Tips from the Pros


    3 Things Landscape Professionals Will Tell You about Landscape Irrigation

    Landscape irrigation can save you a lot of time, money, and energy, but only if it functions when it should function, and the way that it should function. Here are the top three things that a pro will tell you to fix or use before you install your system.

    1. Use a filter:
    A filter is a critical piece of equipment especially on a drip irrigation system. Using a filter will save the homeowner the hassle of dealing with clogged emitters. A filter is recommended even on municipal water systems because dirt and other debris can find its way into the piping of your irrigation system during installation and repairs.

    2. Check your water pressure:
    Residential irrigation systems work best when the water pressure is between 45 to 50 PSI. Not all community water systems or well systems have enough water pressure to make an irrigation system work properly. If your system suffers from low water pressure, this can be corrected by installing a booster pump.

    3. Do a system Check-up:
    Most irrigation systems operate in the early morning hours when many people are still asleep or busy getting ready for work. A broken sprinkler head may go unnoticed for weeks. It’s a good idea to periodically turn on your sprinkler system manually. By using the manual function on your controller you can “walk through” your system to make sure everything is functioning properly and it only takes a few minutes. Doing a quick system check-up every couple of weeks can help you identify sprinkler heads that are not functioning properly. The time you spend will be minimal and will save you a lot of work and expense.

    Consult WP Law for all your landscape irrigation needs. Our professional staff will help to answer any irrigation questions you may have.

    The Ins and Outs of Installing Your Own Drip Irrigation System

    WP Law - Thursday, August 29, 2013

    Installing drip irrigation is not as difficult as you might think.


    Installing Your Own Drip Irrigation System

    Some people are put off by the fact that there seems to be a million parts to a drip irrigation system, but the process itself is very simple. Once you get started, all the parts make a great deal of sense.

    Here is all you need to know:

    Drip irrigation consists of four main parts. Those parts are:
    • the control valve/timer,
    • the main line,
    • directional lines, and
    • emitters.
    The control valve is how the system is turned on and off. In smaller gardens that my simply be the hose bib on the spigot. Most drip irrigation systems will connect to a timer so that your labor is reduced.

    The first step is to place the main line where you need it to go. Usually this is in the furrows between rows. Once that is in place, it is time to connect your main line to your water source. Some kits come with a twist on connector already attached to the line. If not, the connector can be attached as a snap on, or screw on application.

    Once the main line is connected, you begin the longer task of attaching the emitter lines. You might have to pierce the main line and then fit in a connector. There is a special tool available to help you pierce the main line. The connectors are easy to insert into the mainline.

    The next step is to measure, cut, and stake your emitter line from the main line to the plant. The emitter line is made to snap onto the mainline connector. The last step is to insert the emitter into the plant end of the emitter line. Test the system and make sure you don't have leaks, and you are done.

    Most drip irrigation systems can be set up in less than a day, depending on how large the project is and how much help you have.

    Check out the line of drip irrigation systems the pros at WP Law recommend. Then if you’ve got questions, send them to us here, and we’ll get right back to you with answers you can trust.

    DIY Garden Watering Systems: A Basic Guide

    WP Law - Monday, August 12, 2013

    Garden watering systems are an important part of being a green gardener.

    DIY Garden Watering Systems

    It might seem odd that garden watering systems play such a big role in going green, but consider the impact of wasting water on the local and larger environmental community. One of the benefits of home gardening is free food, food that is not only healthier for you, but cheaper than comparable food at the grocery store.

    Using a garden watering system helps you to further reduce the cost of growing your own food, and it helps the environment, too.

    Here are the basics you need to know about installing DIY garden watering systems.

    First, don't be intimidated by the number of parts and pieces. There is a very logical and organized method to the madness.

    Second, understand what those pieces do, and realize that if you break one, it's not the end of the world. It simply means a trip to your local W. P. Law, Inc. store (with broken part in hand) and buying a replacement. Most pieces cost less than $2.

    Understanding the pieces: 
    The main line is usually thick and it is laid out first. It also connects to your water tap. There is a piercing tool, which is used to pierce the main line. Into the hole that you pierced into the main line are connectors, usually T shaped though not always. Then there is the emitter line, which is often very tiny in diameter and rolled up into a long roll. Then there are the emitters. There may also be a timer which goes between the water tap and the main line.


    How it all goes together:
    In many kits, the main line comes fitted with a pre-connector so that it can be connected easily to the water tap. If not, they are easy to install. Once the main line is laid out where you want it to go (usually between the rows of plants.) it is stacked down using U stakes. Then you use the piercing tool to pierce the main line at junctions where you want the emitter line to come off of the main line. Into the holes (piercings,) you snap the connectors. Next, cut the emitter lines to the designated lengths and connect one end to the connectors. An emitter is fitted into the other end and then you can use more U stakes to hold the emitter line in place.

    Test the system by turning it on, and check for leaks. If you have leaks, repair them. There are many kits available that offer the benefit of having everything you need. One great thing about using garden watering systems is that they use less water because they water only around the plant, not the whole garden. Emitters come in various sizes and by that we mean that have a range of Gallons Per Hour. Most plant and gardens require a 1 GPH or less. Trees usually require a 4 GPH emitter and shrubs a 2-3 GPH emitter. Feel free to improvise your emitters. They need not be all the same rating.

    In the meantime, enjoy your garden and the fruits of your labor! If you’re a homeowner with questions about garden watering systems, we’re here with answers.

    3 Ways Using an Irrigation Timer Can Get You a Better Lawn

    WP Law - Monday, July 15, 2013

    Irrigation Timer - When is the best time to water your lawnThe right irrigation timer can make short work of your lawn maintenance.

    3 Ways Using an Irrigation Timer Can Get You a Better Lawn
    Lawn care and maintenance is a science. Or is it an art? Either way, there’s a lot of information about what landscape products to use as well as secret tricks to improving the efficiency of your maintenance systems.

    One of the most obvious ways to simplify this process is to make it a more hands-off experience. That’s where irrigation timers come in.

    1. Timekeeping. Irrigation is a critical factor in maintaining a healthy, happy lawn. A basic rule of plants is that they need water and they need it regularly. Most of us have pretty busy lives, and devoting time to a personal watering schedule isn’t always an option. Timers can guarantee that your lawn gets attention even when you aren’t there to give it.

    2. Saturation. It’s not enough just to water your lawn. Wetting down the blades of grass or misting the leaves of your new garden is sure to send these plans to an early grave. Irrigation systems will soak into the soil and nourish your lawn, providing a consistent level saturation every week.

    3. Customizability. Another popular bone of contention in the watering world is the idea that when you water matters. Watering during the hottest part of the day decreases absorption and compromises the efficiency of your watering system. Irrigation timers eliminate this problem by providing a customizable activation setting.

    For help choosing irrigation timers that fit your needs perfectly, contact the experts at WP Law, Inc: http://www.wplawinc.com/corporate-contact.

    3 Reasons an Irrigation Company Should Be Part of Your DIY Landscaping or Irrigation Project

    WP Law - Thursday, July 04, 2013

    Before you take the plunge, what you need to know about irrigation companies.

    3 Reasons an Irrigation Company Should Be Part of Your DIY Landscaping or Irrigation Project
    You’ve been carefully making your plans. You've been cutting out magazine clippings, surfing Google image results, and drawing out how your new backyard or front lawn will look.

    Except you might be making a huge mistake: not talking to an irrigation company.

    You have all the ambition of a home improvement guru, but none of the expertise. If you’re getting ready to make some major landscape changes, it’s a good idea to get an expert irrigation and landscape opinion as part of your prep work.

    Whether you want an improved lawn for the summer or to incorporate some water features to the patio, irrigation professionals are here to make that process easier.

    1. Irrigation professionals are committed to their clients. The work they do is a reflection of their place in the industry. Irrigation companies specialize in creating customized solutions to your landscaping or irrigation needs.
    2. Irrigation companies have extensive resources and industry networks. They can coordinate with suppliers to provide the best materials and can be relied upon to get you the best deals available. Their certification makes them qualified to assist you, and their experience can provide insight into avoiding common roadblocks on home improvement projects.
    3. Irrigation companies have sustainable solutions to your landscaping problems. Avoid the blunders of a quick fix or a job poorly done. By contracting with an irrigation company, you can count on a dependable and long-term product that will maintain it’s appeal for years to come and save you money in the long run.

    Contact the experts irrigation companies turn to at WP Law, Inc. for more information at http://www.wplawinc.com/corporate-contact.

    3 Fascinating Facts About Drip Irrigation

    WP Law - Monday, July 01, 2013

    Drip Irrigation Is a Gardening Game-Changer.


    3 Fascinating Facts About Drip Irrigation

    Are you tired of standing in your hot yard and wasting time on an uneconomical watering system? Drip irrigation takes water straight to the source and is one of the most efficient ways to tend your garden.

    When it comes to making a decision about which irrigation system to use for your garden

    1. Drip irrigation saves you time and money. Sprinkler systems often fail to provide water at a level that can be successfully absorbed by garden soil. While sprinklers may work well enough for lawns or yards, a drip system can access the garden and nourish your plants. This simplified technique saves water, which minimizes your utilities bill each month. It also requires no active supervision.

    2. Less is More. This is the secret to good absorption rates. Drip tubing/tape should be kept at a steady water pressure level, but never set them high enough to openly spray. This kind of water distribution can make the soil uneven and defeat the purpose of the system. Also avoid sloped or hilly ground because the runoff will pool unevenly.

    3. Spacing and Timing Matter. As with any watering system, timing is essential. But especially with drip irrigation, the spacing of each drip line determines the allocation of water in your garden. Check the absorption rate of your soil and adjust the frequency accordingly.

    Want to find out if drip irrigation is the best choice for your garden, or have questions about how to install it? Contact the drip irrigation experts at WP Law, Inc for more information: http://www.wplawinc.com/corporate-contact.

    Understanding Irrigation Filters

    WP Law - Monday, June 10, 2013

    What do you need to know about irrigation filters?

    Understanding Irrigation Filters

    Irrigation filters are an essential part of maintaining a reliable irrigation system. They can save you the hassle and expense of costly repairs and system down time. Proper filtration can prevent damage to sprinkler heads and valves from sand and other debris that can be pumped from wells and bodies of surface water. Filtration is an absolute must for drip and micro-irrigation systems. These systems have small orifices that can easily become clogged by algae and other organic and inorganic particles.

    Screen filters are the most common type of filtration used in irrigation applications. They are cost effective and can perform effectively across a wide range of varying water quality and are well suited for sprinkler and drip irrigation system applications. Disc filters and sand media filters are also commonly used in irrigation applications, although they are mostly used for drip or micro-sprinkler irrigation systems.

    Although there are different filtration options on the market today, the one thing they all have in common is that they need to be cleaned regularly. Automatic self-cleaning screen filters make this task almost effortless. Other filtration systems such as sand media and disc also have automated self-cleaning options to remove debris.

    For more information on this cost-effective way to protect your irrigation system, ask the experts at W. P. Law, Inc. http://www.wplawinc.com/corporate-contact

    Automatic Watering System for Plants – 3 Ways to Simplify Plant Care

    WP Law - Monday, June 03, 2013

    How can an automatic watering system help your plants thrive?

    Automatic Watering System for Plants – 3 Ways to Simplify Plant Care

    Healthy gardens and landscaping require time and attention to detail. An effective watering schedule is an important part of plant care.

    • Investing in an automatic watering system for plants can help regulate the watering schedule and ensure that irrigation is consistent and convenient.

    This means you can spend less time worrying about your plants, and more time appreciating them.

    • A professionally installed automatic water system will not only simplify the watering process, it will guarantee that plants receive the right amount of attention at the peak watering hours in your area.

    How many times have you seen yard sprinklers wasting water during the hottest part of the day, or misdirecting it onto sidewalks and driveways? This system will conserve water distribution and provide even landscape coverage, saving money as well as respecting the environment.

    • Landscape professionals can customize the design and installation of your automatic watering system to help you make this investment long-term and cost-effective.

    Maintaining a healthy lawn or garden requires planning and commitment. An automatic watering system can help create an efficient and hassle-free timetable for plant care.

    For advice on which automatic watering system will work best for your plants, ask the experts at W. P. Law, Inc. http://www.wplawinc.com/corporate-contact

    4 Drip Line Irrigation Mistakes You Don't Know You're Making

    WP Law - Monday, May 06, 2013

    When using drip line irrigation, your results depend on doing it right.

    4 Drip Line Irrigation Mistakes You Don't Know You're Making

    Let’s take a look at number of reasons why drip line irrigation can be ineffective because of user error.

    • Too few emitters: The key point of drip irrigation is to ensure that the root zone of the plant is adequately watered. A common mistake is to use fewer emitters than what is necessary to efficiently water the plant. When you have large plants it is important to make sure that you have enough emitters.

    You should also avoid a situation where a large plant (tree) is depending on a single emitter for its water supply. If for some reason the emitter becomes clogged or otherwise dysfunctional, the plant will die. It is a good practice to water all plants from at least two sources.

    • Poor placement: Another common error is placing the emitters too close to or too far from the plant. The emitters should be evenly spaced and kept at least six inches from the base of the plant.

    • Subpar filtration: Not using a filter or using the wrong drip system filter is another common mistake. A 155 mesh to 200 mesh filter should be used.

    • Incorrect Pressure: In order for a drip irrigation system to work properly the right water pressure is essential. Most pressure compensating emitters can operate at a range of 20-50 PSI, but typically work best at 30 PSI. An excessive number of emitters, an extremely long run of drip tubing, or a combination of both can cause the pressure in the line to drop below what is needed to allow the emitters to function properly.

    If you give attention to these areas of concern you should see much better results.

    Have questions about drip line irrigation? Contact the experts at W. P. Law, Inc. and we will help you get the answers you need to have the best crop or landscape ever.

    Choosing the Right Gift for Father's Day: What About a Residential Fountain?

    WP Law - Thursday, April 25, 2013

    Residential fountains are an ideal gift idea for the Dad who already has everything.

     right gift for fathers day

    Father's Day is right around the corner and everyone is scrambling trying to find just the right gift – and a residential fountain may be just what he’d love to get. When placed in the perfect spot, they not only beautify the home, but provide a relaxing atmosphere that helps to relieve stress and frustration.

    Choosing a gift he’ll really like is sometimes the hardest decision to make. Residential fountains offer definite advantages over other Father's Day gifts.
    • They require little maintenance
    • They can be customized to the surrounding area
    • They beautify the property
    • They increase property value

    Most fathers think of their home as their castle. They look forward to relaxing and enjoying their time at home. They also like to receive gifts that serve a purpose. Residential fountains do just that. They offer many benefits to the homeowner without creating extra work or added expense. In fact, placed in the right area and properly maintained, a fountain can increase the home's overall value.

    If you are having trouble deciding on a Father's Day gift, look into residential fountains. They come in a wide variety of styles and materials and can enhance the beauty of any home.

    Need help choosing the perfect residential fountain for Father’s Day? Ask the pros at WP Law for help.

    Top 3 Places to Install Commercial Fountains

    WP Law - Thursday, April 18, 2013

    When you want to improve the look of your business or office building, commercial fountains are an excellent choice.

     top 3 places to install commercial fountains

    This is what you should know about the top three places you should consider having a commercial fountain installed. Selecting the right site will add beauty to your facility and impress your clients.

    A popular location for you to install a commercial fountain is the entrance way into your facility. Entrance fountains not only provide an eye-catching landmark for your business, but they provide an important first impression to your clients.

    Another great location for a commercial fountain is the inner lobby of your building. This location works great especially if you have a large spacious lobby. In addition to being a focal point, lobby fountains can drown out background noise while still allowing clients and employees to have private conversations.

    If your business is a retail location, a commercial fountain located near the store front can provide an attraction that will help increase foot traffic. More foot traffic means more business.

    Having a great looking commercial fountain can be a great way to enhance your company’s appearance and your customers’ experience. If you want professional help in choosing the right fountain and where to place it, ask the professionals at W. P. Law, Inc.

    For more information about commercial fountain installation, just ask for a consultation here.

    DIY Fountains - How to Add Some Art to Your Home

    WP Law - Thursday, April 11, 2013

    DIY Fountains are easy to install and maintain, and add enjoyment to your home.

     diy fountains - add art to your home

    Are you a gardening weekend warrior looking to take your skills to the next level? Maybe you are a regular DIY buff and looking for the next yard project to tackle. Well we have an excellent project for you no matter what your prior experience might be. W.P. Law Inc. offers fun DIY fountains that your whole family can help setting up.

    You might think that water projects for the yard are going to take too much effort or know-how to accomplish. Well we can help you set up a beautiful fountain that is easy for just about anyone to get running. You will be proud knowing your own hands were behind the creation of your very own new fountain. Family and neighbors will admire the new fountain installation as well.

    By adding water features, especially a DIY fountain, to your property, you’ll enjoy the pleasing and relaxing sound of water. Plus, water features add value and curb appeal. Installing and maintaining your fountain is easy if you choose the right DIY fountain and have experts to call on when you run into questions.

    W.P. Law Inc. has all the parts, plans and tools your need to get started in the creation of your very own DIY fountain. With no existing hands-on experience or a load of training you will be getting your fountain running in no time flat.

    Create the water works masterpiece of your dreams today! Contact us to find out how we can get you’re started with your own DIY kit to build unique fountain installations at your home for your family and visitors.

    Why Are So Many Churches Installing Commercial Fountains?

    WP Law - Monday, April 08, 2013

    There is a great connection between churches and commercial fountains that are seen on those buildings.

     why are so many churches installing commercial fountains

    The Bible is full of illustrations using things that can be seen to explain things that cannot be seen – and the presence of commercial fountains on many church campuses is an object lesson as well as a beautification element.

    From the book of Genesis to the last book of Revelation, water is mentioned over 700 times. Jesus referred to Himself as Living Water and invited all to drink freely; a church is going to be a perfect place then, for a water feature.

    An indoor waterfall in the foyer can be a visual reminder of the streams of Living Water promised to the believer. The congregation can look at a chosen verse incorporated into the design and immediately get the connection. A fountain outside the building can proclaim Jesus' invitation to come and partake of the spiritual offerings inside.

    The problem with this idea is the creating of the water feature; plumbing, humidity levels, building codes, design, permits, electricity standards are only a few of the issues involved. This is not a job for a do-it-yourselfer, particularly in a building open to the public on a regular basis.

    The professionals at W.P. Law, Incorporated have over 15 years of experience in designing commercial fountains, as well as constructing, maintaining, and repairing water features in a variety of locations. Our team can work with you to come up with the ideal water feature for your church. Contact us today.

    3 Types of Residential Fountains You Could Use at Your Business

    WP Law - Monday, April 01, 2013

    A great idea for beautifying your place of business... residential fountains can add a touch of elegance even at work.

    3 types of residential fountains 

    Did you know you can easily add a water feature to your business property? Many types of residential fountains can be installed in a commercial or business setting. It might even entice your customers to come in more often.

    We all enjoy walking by a lake or looking out at a waterfall and perhaps tossing coins in a fountain for good luck. Residential fountains are easy to add to a courtyard for your employees to enjoy lunch hour or you’re landscaping making your building attractive to the public. Here are three common types of fountains used in homes that can also be useful at your business.

    Water gardens and waterfalls can be as simple as a preformed pool with rocks around it and some plants with a few fish. They can also be elaborate mini-worlds with waterfalls and paths going over koi ponds.

    Floating fountains can add a spray feature to a pond, aerating to improve water quality and adding the soothing sound of water falling into the pool as you watch the rainbows in the mist.

    Architectural fountains are a broad category of water feature. Each fountain is composed of a pump, pipes, and possibly sprayer moving water across whatever you decide you want as your focus. You are limited by your imagination, your budget, and physics.

    How do you decide? W. P. Law Inc. carries everything you need to bring your ideas to life and has the expert advice available to guide you in the process – just ask for a free consultation today.

    2 Tips for Protecting Irrigation Sprinkler Heads at Sports Facilities

    Flip Law - Thursday, March 28, 2013

    protecting irrigation sprinklers

    Prevention is paramount – how to keep your irrigation sprinkler heads from getting tackled.


    Keeping your landscape irrigation sprinkler heads intact and functioning properly is one of the keys to having a great field for any game. There is nothing good about playing on a field where the grass is having challenges because it isn’t getting watered property. One of the main causes of a failing field can be associated with the unfortunate fact that irrigation sprinkler heads can be destroyed.

    One of the key elements to making sure that your field is protected is proper planning. Make sure your irrigation sprinkler heads have a fighting chance on your field.

    Install at the proper depth.
    Make sure that irrigation sprinkler heads are installed at the proper depth per the manufacturer’s instructions. By installing sprinkler heads at the proper depth you not only protect the sprinklers from being damaged by mowing equipment you also help protect athletes from potential injury.

    Adjust when necessary.
    Check the installation depth of sprinklers every few years. Top dressing and other soil amendments build up over time causing the sprinkler installation depth to increase over time. Sprinklers that are installed too deep can develop problems over time such as leaking around the riser stem and non-rotation.

    The experts at W.P. Law, Inc. are knowledgeable about your irrigation sprinkler heads and a variety of other issues that can arise for your system. Visit our professionals who can assist you with any kind of problems you may have with your own field irrigation.

    Visit www.wplawinc.com/corporate-contact.

    When Should I Aerate My Lawn?

    - Monday, March 04, 2013

    lawn aerate

    Aeration helps provide a healthy lush lawn.


    Grasses fall into two different categories: warm-season and cool-season. Warm-season grasses start active growth in summer. Aerate a warm-season lawn in late spring to early summer, During this time the rapid growth will quickly fill in the holes you create.

    Cool-season turf comes out of dormancy in early fall and grows vigorously during the lower temperature. Just remember to plan your aeration to allow four weeks of growing time prior to frost.

    Warm-season turf types – aerate these in the spring or early summer:

    • Bahia grass
    • Bermuda grass
    • Centipede grass
    • St. Augustine grass
    • Zoysia grass

    Cool-season turf types – aerate in fall:

    • Creeping bent grass
    • Fescue
    • Kentucky bluegrass
    • Rough bluegrass
    • Rye grass (annual, perennial)

    How to aerate in different soil types

    Clay soil is compacted easily and should be aerated at least once a year. You can aerate a sandy lawn once a year, or on alternate years. In dry climates, aerating twice a year will enhance turf growth and health. If your lawn is used for parking cars, or have a lot of foot traffic you should aerate annually.

    • Aerate just prior to fertilizing or reseeding your lawn. Doing this creates openings for nutrients and seed to enter soil.
    • Weeds should be controlled prior to aerating, because aerating can spread weed seeds and weed roots.
    • Wait at least a year to aerate new lawn, so that grass is well established.
    • Aerate when soil is moist, but not saturated.
    • Avoid aerating during drought or high heat. If you aerate in these conditions, you’ll stress the lawn by allowing heat to dry soil.

    For more information about lawn aeration and other products and services to keep you landscape looking its best contact W.P. Law, Inc. or visit www.wplawinc.com/corporate-contact.

    Landscape Irrigation Maintenance

    Flip Law - Thursday, February 28, 2013

    picture of sprinkler

    An ounce of prevention is worth a pound of cure


    Landscape irrigation can be a true blessing for any home or business owner, especially during the hot dry months of summer. A little bit of maintenance can go a long way in keeping your system up and running when it’s needed the most.

    The following are a few irrigation maintenance tips.

    Clean the filters and screens:
    Most drip irrigation systems have a wye-type screen filter to keep debris from clogging emitters and spray stakes. The screen is removable and needs to be cleaned periodically. Also most pop-up sprinklers and spray heads have an intake screen located at the base of the head or just under the nozzle. If you notice a weakened spray pattern, a partially clogged screen may be the culprit.

    Check for damaged sprinklers:
    Sprinklers can become damaged from mowing and aerating equipment. Broken sprinklers no only waste water, but they can cause other sprinklers to perform poorly due to the lower water pressure.

    Leaky valves:
    Valves can begin to leak over time. This is usually due to worn or distorted diaphragms. These parts can easily be replaced. Spring is a good time to make these repairs before the hot dry weather sets in.

    The irrigation experts at W.P. Law, Inc. are knowledgeable in a variety of issues that can arise. Visit our professionals who can assist you with any number of problems you may have with your own landscape irrigation.

    Visit www.wplawinc.com/corporate-contact.

    Smart Irrigation Systems

    Flip Law - Thursday, February 21, 2013

    smart irrigation systems

    Technology meets irrigation systems


    When it comes to having a beautiful and well cared for landscaping one of the key components is having adequate water. Irrigation controllers have been around for decades and have allowed us to automate the mundane task of turning irrigation systems on and off. Irrigation controllers typically allow the operator the options of selecting the day and time that an irrigation cycle will start, what zone(s) will run and for how long. In many cases the irrigation run time is an educated guess. While irrigation run times can be calculated to apply a given amount of water over a given area, these calculations do not factor in the weather conditions on a given day.

    Behold the “smart” irrigation controller. Smart controllers utilize an on-site weather station to adjust irrigation run times on an as needed basis. Smart controllers also take into account the soil type, plant material, and historical climate data. Because smart controllers can “think” they can make irrigation run-time adjustments. They will allow the irrigation system to run more frequently during dry periods and less frequently on cloudy or rainy days.

    Smart controllers not only provide a more healthy landscape they also help conserve our most precious natural resource.

    For more valuable information about smart water irrigation systems contact the experts at W.P. Law, Inc.

    Visit www.wplawinc.com/corporate-contact.

    Irrigation Controllers – Take Control of your Irrigation

    Flip Law - Thursday, February 14, 2013

    irrigation controllers

    Controlling Your Controller


    One of the greatest accessories for anyone who enjoys landscaping, but doesn’t have a lot of time to stand outside and water a lawn by hand, are irrigation controllers. These are controllers that are designed to automate your irrigation system and allow you to designate when to water your landscape.

    Using irrigation controllers for the first time can be somewhat intimidating. Here are a few tips to help you take control of your controller:

    1. Have Confidence: First and foremost, have some assurance in your abilities. If you found this tip online and are reading this than you are more than capable of setting and enabling irrigation controllers.

    2. Find information: A user manual is your best friend and your key to success. If this is a new system make sure to keep the manual handy for a while as you get familiar with it. If this is an older system and you do not have access to a manual there are plenty of resources available online. There are websites that host these manuals for download, or you may be able to find one from the manufacturer’s website.

    3. Ask questions: When in doubt ask. There are plenty of experts and knowledgeable people who are familiar with irrigation controllers and many of them are more than willing to answer questions for you.

    Visit the irrigation specialists at W.P. Law, Inc. for quality irrigation systems and supplies, and are available to answers your irrigation controller questions.

    Visit www.wplawinc.com/corporate-contact.

    Irrigation System Troubleshooting Tactics

    Flip Law - Monday, February 11, 2013

    troubleshooting tactices

    Landscape professionals: Taking the Guesswork Out of Irrigation System Problems


    As spring time approaches, many homeowners will be getting their irrigation systems ready for the season. This is an excellent time to walk through the system while it is operating and make a list of problems that need to be addressed before spring. Here are a few things to look for and their possible cause.

    The following are a few things to look for when troubleshooting on your own:

    1. Sprinkler does not rotate: If you have a rotor or impact type sprinkler that is not rotating, this can be a relatively simple fix. Usually non-rotation is caused by debris interfering with the sprinkler. In most cases this can be corrected by cleaning and flushing the sprinkler. In some cases the head may need to be replaced.

    2. Broken or damaged sprinklers: If you get a mini geyser when you turn the system on, this is most always an indication of a broken or damage sprinkler head. Chances are you accidentally clipped one with your mower when picking up leaves in the fall. You will need to replace the sprinkler head to fix this problem.

    3. Irrigation zones that do not come on: This problem can be a lot more complicated. The causes can be a faulty valve solenoid, faulty zone on the irrigation controller, bad electrical connection and even a broken wire. While the actual repair may be easy enough, finding the actual cause of the problem may be another story. In cases like this it is best to call in a professional irrigation contractor. An irrigation professional will have the equipment necessary to locate the cause of the problem and make the repair in an efficient manner. This will save the homeowner hours of frustration.

    While there are many repairs and maintenance issues that homeowners can take care of themselves, it’s good to know when to call in the professionals.

    W.P. Law, Inc. takes pride in their expert irrigation professionals who are proficiently trained to assist you with any of your irrigation system needs. Our staff will be happy to recommend a quality contractor to handle your maintenance and installation needs.

    Visit www.wplawinc.com/corporate-contact.

    The Benefits of Indoor Commercial Fountains at Your Office

    Flip Law - Thursday, February 07, 2013

    benefits of indoor fountains

    Raising Health and Awe, with a Little Water


    There is nothing quite like the peace and serenity that a fountain generates and there is something that is inspiring when you get close to them. Whether you are standing in front of a magnificent display of water and light or a simple design in a business there is a special feeling you get when you see a fountain.

    What many people do not realize however is that there are actual benefits that you can get from using a fountain and if you add one to your office you can see real results.

    From stress relief and relaxation to eliminating annoying sounds there are many unseen wonders that can come from commercial fountains. Here are just a few examples of how they can help you and your office.

    • Taking the pressure off: There is good strong evidence that shows adding an indoor fountain to your environment can actually help to alleviate stress and boost the mood of those who are in contact with them.

    • Add to the décor: An obvious advantage to using an indoor fountain is the effect it will have on the overall look and feel that your office will have. Indoor fountains can be pleasing to the eye, and also mask machinery noise and other unwanted sound.

    • Humidifier: In addition to these benefits commercial fountains can also serve as a natural humidifier.

    There are a variety of commercial fountains that you can choose from and a host of styles and sizes. Visit the indoor fountain specialists at W.P. Law, Inc. for more information and advice on which would be the best fit for you and your office.

    Visit www.wplawinc.com/corporate-contact.

    Understanding the Importance of an Irrigation Backflow Preventer

    Flip Law - Wednesday, February 06, 2013

    backflow preventer

    What is a Backflow Preventer and why do I need one?


    Many people do not understand the importance of having an irrigation backflow preventer and why it is necessary. The landscape around your home or business is filled with all sorts of things that can make you sick if ingested. Fertilizers, pesticides and the bacteria found in pet wastes just to name a few.

    Most irrigation systems are connected to a potable water supply. Backflow preventers, as the name implies, prevent contaminated water from flowing back into the potable water supply. Backflow can occur if there is a sudden pressure drop in the municipal water line. This could be caused by the opening of a fire hydrant for example. When the pressure drops on the supply side of an irrigation system, water that is standing around a sprinkler head can be drawn back into the municipal water line, thus contaminating the potable water supply. Backflow preventers keep this from happening.

    Because the potential risk for contamination is high, most municipalities require the installation of a backflow prevention device on all irrigation systems and require that they be tested at least annually.

    There are several types of backflow prevention devices. The type of device you are required to install is largely dictated by local codes. These codes can vary by water purveyor so make sure you contact them for a list of approved devices and manufacturers.

    Visit the irrigation specialists at W.P. Law, Inc. for quality irrigation systems and supplies, plus get more information and advice on why an irrigation backflow preventer can be a benefit for your system.

    Visit www.wplawinc.com/corporate-contact.

    How to Repair Damaged Water Features

    Flip Law - Monday, January 28, 2013

    how to repair damaged water features

    Repair the cracks and broken parts of you backyard water features.


    Water features are a delightful addition to your property. Like most everything, they sometimes need repairs, especially because they are subjected to harsh elements all year long.

    Cracking is a common problem with water features. The sun’s harmful rays and the cold winter weather can cause cracks in the feature. If you notice your feature is leaking, it’s possible that there is a crack that needs repairing.

    To repair cracks and chips:

    First, locate the crack. You’ll need to reduce the water level to below the crack, or drain the entire feature. Make sure you remove any wildlife or fish before you drain the feature. For cement features, remove the loose debris surrounding the crack using a chisel. Dust the area off. Apply bonding liquid, then the concrete. Let it dry, reseal and paint the repaired area.

    To repair broken-off parts:

    Epoxy is a great choice for mending two broken pieces of your water feature. Mix the epoxy following the manufacturer’s directions. Apply some epoxy to each piece and bond them together.

    The irrigation experts at W.P. Law, Inc. carry quality water features that will bring beauty to your landscape. 

    How to Replace Leaking Irrigation Fittings

    Flip Law - Thursday, January 24, 2013

    replace leaking irrigation fittings

    6 Steps for replacing pipe thread irrigation fittings.


    Home irrigation systems provide the water needed for your landscape to thrive. Advancements in design, as well as, products have made home irrigation maintenance and repair easy for do-it-yourself homeowners.

    Replacing pipe thread irrigation fittings is a common repair for irrigation systems. Over time, leaks may develop, and the need for replacing fittings arises.

    Here are six steps to replace irrigation fittings:

    1. Dig out the area: Carefully remove the sod without damaging the root system and dig down to the piping.

    2. Turn the water supply off.

    3. Remove the fittings: Remove the fittings to be replaced.

    4. Use Teflon tape: Threaded fittings have to be sealed to be sure the seal is watertight. Using Teflon tape, wrap the tape around the end three or four times.

    5. Screw the pieces together: Screw the pieces together tightly and replace in the ground. Turn the water supply on to check for leaks.

    6. Replace soil & sod: Replace the soil and re-lay the sod. Use a tamper to compact the soil and insure the root system has good contact with the soil

    Visit the irrigation experts at W.P. Law, Inc. for quality irrigation systems and supplies.

    Get Your Soil Ready for Spring - Take Soil Samples Now.

    Flip Law - Monday, January 21, 2013

    get your soil ready for spring

    Early soil testing can help you get your lawn and garden ready for Spring.


    A soil nutrient test is the best way to determine what your lawn and landscape needs to stay healthy and thrive. A soil test is done by sending a soil sample (usually about two cups) off to a lab for analysis. Samples can be sent off to an independent private lab or to your state’s Land Grant University soil testing facility. While both labs will give you an accurate soil test, most independent labs will provide you with faster results. The cost for a soil test is usually between $10.00 - $15.00.

    A soil test will check the nutrient levels in your soil and compare them to what the plant that you are trying to grow actually needs. The soil test will identify the areas where your soil has nutrient deficiencies and make recommendations on what nutrients to add to make up these deficiencies.

    A soil test will also test your soil’s pH level or acidity. Most plants like soils that are slightly acidic, that is having a pH lower than 7. The soil pH also affects the “efficiency” of your fertilizer. The nutrients contained in fertilizer can actually bind in the soil and not be available to you plants if the pH is too far off. Correcting soil pH is easy to do with lime. Lime reacts with the soil to raise the pH in soils that are too acidic. However, lime takes time to react with the soil and raise pH. For this reason, most lime applications are made in late winter.

    An inexpensive soil test will not only help you have a healthy lawn and landscape, but can save you money by helping you avoid unnecessary fertilizer applications and making applications at the wrong time of year.

    For more valuable information about soil nutrient tests and how they can help you have the lawn of your dreams contact the experts at W.P. LawInc.

    How to Plan for a New Landscape Irrigation System

    Flip Law - Monday, January 14, 2013

    plan for a new landscape irrigation system

    4 Steps to plan for a new irrigation system.


    Installing a new landscape irrigation system takes a lot of planning and research. Your landscape has many different needs and to make sure your new system meets all of those needs, you need to plan properly.

    Here are four steps to plan for a new irrigation system:

    1. Obtain a scaled drawing of your property: To begin the design process you will need a scaled drawing of your property. This drawing can be a tax map or a map obtained from your property deed. You can also use online resources such as Google Earth, just make sure your printed map is to scale.

    2. Fill in the details: You will need to show the house, driveway, sidewalks, patios, decks, large trees, natural areas, and other landscape beds on the scaled drawing. Also show what areas you want irrigated and what type of plant material is in these areas.

    3. Locate the water source: Locate the source of your water supply and note it on your scaled drawing. If you are using a municipal water source, note the size of the water meter. It is usually stamped on the meter (5/8”, ¾”, etc.). You will also need to do a flow test by timing how long it takes to fill a five gallon bucket. Do repeated test so you can take the average.

    4. Design the system: Now is the time to design the system. This is best left up to a professional. A trained and certified irrigation designer will help you locate sprinkler heads properly, size the pipe properly, and help you decide what controller options are best for you.

    Now that your irrigation system is planned, you’ll need to purchase the irrigation supplies, and the tools necessary to get the job done. Visit the irrigation specialists at W.P. Law, Inc. for quality irrigation systems and supplies, plus answers to your questions as you install your system.

    Preparing Your Drip Watering System for Spring

    Flip Law - Thursday, January 10, 2013

    5 Steps for getting your drip watering system ready for spring.


    Winter may seem a little early to begin preparing your drip watering system for the upcoming spring season, but it’s not. It’s a good idea to take the time during the winter months to evaluate your system’s needs.

    Here are five steps for preparing your drip watering system for spring use:

    1. Check the controls: Clean off the irrigation controller, dust away any debris or cobwebs. Check the settings to make sure they are set for the appropriate time.

    2. Check the battery: Replace the back-up battery in the controller.

    3. Check for debris: Check the tubing and heads for any debris that may block the flow of water.

    4. Flush out the system: Flush the tubing out to remove any dirt, or other debris that may have settled into the tubing.

    5. Replace damaged parts: Inspect the system for cracked or damaged parts. If there are damaged parts, replace them.

    By taking the time now to prepare your irrigation system, you can rest easy knowing that when spring arrives your system will be ready to provide irrigation for your precious crops or landscaping.

    W.P. Law, Inc. carries quality irrigation supplies for all of your irrigation needs, and our irrigation experts can answer any question you have about your system.

    How to Repair Irrigation Systems After Winter Damage

    Flip Law - Monday, January 07, 2013

    3 Common problems with irrigation systems after winter weather.



    Harsh winter weather can damage irrigation systems if the system wasn't winterized properly. The most common cause of winter damage to sprinkler systems is freezing water inside of the piping. As the water freezes, it expands and can cause pipes to crack and leak. Some irrigation problems can be fixed by the homeowner while others may require hiring an irrigation professional.

    Here are some common problems you may encounter after winter weather and how to repair them.

    • Cracked pipes: To repair cracked pipes, turn the water off. Use a PVC pipe cutter to remove the damaged section of pipe. Make the repair using a telescoping repair coupling or compression coupling.

    • Clogged sprinkler heads: Turn the water supply off. Pop the sprinkler head’s riser up and unscrew the top and remove the filter. Remove any debris and rinse the filter. Replace the filter and the sprinkler head.

    • Damaged sprinkler heads: If the sprinkler head is damaged, you may need to replace it. Simply unscrew the sprinkler head, clear out any debris and screw the new sprinkler on.

    If you didn't winterize your irrigation system it’s possible that the system sustained damage during the cold winter weather.

    Visit the irrigation specialists at W.P. Law, Inc. for quality irrigation systems and supplies, plus information and advice on keeping your irrigation system working properly.

    Repairing Your Damaged Piping Systems

    Flip Law - Thursday, January 03, 2013

    How can you troubleshoot and repair your damaged irrigation piping?


    Irrigation piping systems, over time, can become damaged, and begin to leak. Tree roots, an errant shovel and freezing temperatures all can damage underground irrigation pipes.

    Troubleshooting

    The easiest way to locate the areas where the pipes are damaged is to turn the sprinkler system on and look for water that puddles on the surface. Sprinkler heads that have a weak spray can also be an indication that you have a leak in your piping system.

    Once you've found the trouble spots, first inspect the sprinkler heads to ensure there isn’t debris blocking the water. If they are clear, you’ll need to inspect the pipes.

    Dig down to gain access to the pipes in the area where there is standing water and inspect them.

    To Repair Pipes

    Shut down the water running to the system. Cut out the damaged section of pipe using a PVC pipe cutter to insure smooth edges. You can also use a hand saw or reciprocating saw on larger diameter pipe, but you will need to de-burr the pipe edges.

    Repairs can be made using a compression type repair coupling or a glue-on telescoping repair coupling. If you are using a glue-on repair coupling, you need to make sure you are using a PVC cement that is suitable for use in wet conditions such as IPS #725 Wet ‘R Dry.

    Once the PVC cement has had time to cure properly, turn the system back on and check for leaks. Then, replace the soil and sod.

    For more information about fixing damaged irrigation pipes, and to purchase supplies, contact the irrigation experts at W.P. Law Inc.

    3 FAQs About Landscape Products

    Flip Law - Monday, December 31, 2012
    question mark circle

    Improve your home’s curb appeal with landscape products

    If you want to improve the curb appeal of your home, start with redesigning your landscape using the many landscape products available today.

    Here are three frequently asked questions:

    Is LED landscape lighting better than halogen landscape lighting?

    Landscape lighting is great to use to highlight the architectural features of your home. LED lighting fixtures are far more economical to operate than conventional incandescent or halogen fixtures. Not only are the monthly electric bills lower, but you will also save money on maintenance cost because of the longevity of LED lighting fixtures.

    Why is it more economical to install a timer on a sprinkler system?

    Installing a timer on your sprinkler will save money. The sprinkler system, once programmed will only run during the allotted time its set for. Many homeowners tend to forget to turn off manually operated systems, wasting water and electricity.

    Will a water feature increase the value of my home?

    Whether you choose a small residential fountain, or a pond complete with a waterfall, water features add the perfect touch to any landscaping. It will add to the resale value of your home.

    Contact the experts at W. P. Law, Inc. for top quality landscape products to improve the curb appeal of your home.

    How to Winterize Your Sprinkler System

    Flip Law - Thursday, December 27, 2012
    icicles sprinkler

    Sprinkler systems require winterization to protect them from damage.

    During the fall, homeowners are busy winterizing their homes and landscaping. Did you know that winterizing your sprinkler system is just as important as winterizing your home? Extensive damage can be done to your sprinkler system if it’s not properly winterized. Take the necessary time to ensure your system will be ready to go when spring arrives.
    Here are the steps to take to winterize your irrigation system:

    • Turn off water supply: Turn the water supply off at the main valve. It’s important to note that the main valve should be protected from freezing temperatures. It needs to be buried beneath the frost line, or well insulated.
    • Turn off irrigation controller: If you have an automatic timer, turn it off or set it to “rain mode”.
    • Turn on valves: To release any pressure, turn on all of the valves.
    • Drain the water: Drain the entire system by blowing out the water with an air compressor. If your system is PVC pipe, the pressure shouldn’t exceed 80 psi. If the system is polyethylene pipe, the maximum pressure is 50psi.
    • Remove the backflow preventer: In some cases, you can remove the backflow preventer and store it away for the winter. Make sure you drain the water completely before you store it.
    • Insulate pipes above ground: All water pipes that are above ground should be insulated to protect them from freezing temperatures.

    Contact the irrigation specialist at W. P. Law, Inc. for more valuable information about protecting your system today.

    Common Repairs for Backyard Water Features

    Flip Law - Monday, December 24, 2012
    fixing water features

    How to repair damaged water features

    Water features are a wonderful addition to any home, or office building. Unfortunately, repairs are sometimes necessary to maintain the beauty and value that water features add.
    Here are two common repairs for backyard water features:

    • Cracks: Cracks and leaks are a common problem with water features that need repair immediately. If the pond houses fish, or other wildlife, remove them before making repairs. To repair a crack in your fountain, lower the water level below where the crack is. You’ll need to chisel away any loose debris around the crack. Wipe the area, removing any dust or debris. Next, you’ll need to apply a bonding liquid to the area. Apply mixed concrete to the area, and allow it plenty of time to dry. Reseal the area using the appropriate sealer, once dry you can repaint if necessary.

    • Broken pump: If your pump has stopped working, you should first troubleshoot to see what the problem is. It may sound silly, but you should first check the power source. If there is power to the pump, then check to make sure the water level is covering the pump, and that the water is turned on. Next, check for debris that could be clogging the pump. If these steps haven’t fixed the problem, you may need a new pump.

    Visit the irrigation experts at W. P. Law, Inc. for the best water feature supplies.

    Caring for Residential Fountains

    Flip Law - Thursday, December 20, 2012
    winterize drip irrigation

    4 Maintenance tips for residential fountains

    Residential fountains add a special touch to your landscape. They add value and elegance to your property. Proper maintenance should be done regularly on your fountain to keep it working well and maintain its beauty.
    Here are four maintenance tips for caring for residential fountains:

    1. Keep the water feature clean of debris: Leaves, sticks, trash, and other debris can cause damage to your water feature. You should regularly clean out the feature, removing any debris. Make sure you check the pump for debris, as well.
    2. Clean the pump: You need to keep the pump clear of debris and dirt. Regularly wipe down the pump with a rag to remove dirt, and any algae build-up. Periodically, turn the pump off and remove it to clean the inside.
    3. Maintain the water level: Make sure the water level is right at all times. Water evaporates, especially in the hot months. The water should be high enough to submerge the pump.
    4. Clean the fountain: You should remove the majority of the water monthly and clean the fountain. Use a non-abrasive cleaner recommended by the manufacturer.

    For quality residential fountains, visit the professionals at W.P. Law, Inc.

    How to Prepare Agriculture Irrigation Systems for Winter

    Flip Law - Monday, December 17, 2012
    winterize drip irrigation

    Agriculture Irrigation System: How to winterize your drip irrigation

    Preparing your agriculture irrigation system for cold winter months is important to ensure your system doesn’t get damaged from freezing temperatures. Drip irrigation systems are particularly fragile and can become damaged in freezing temperatures. Therefore, it’s vital to prepare them before freezing temperatures arrive.

    Here are three easy tips to prepare your system for freezing temperatures:

    1. Drain all piping: All main line and sub-main piping should have drain valves located at low points throughout the system. All of these valves should be opened to allow water to drain from the system.
    2. Drain control valves and risers: Many zone control valves are located above ground to allow for easy access. These above ground valves are susceptible to freezing. It is important that all control valve regulators, pilots, and control tubing is thoroughly drained. In some instances these control valves are removed and taken indoors during the winter months when the system isn’t in use. If the control valves are removed, make sure that the piping is capped off to prevent rodents and/or debris from getting into the pipeline.
    3. Drain all pump and filtration equipment: Open all drain valves and remove any drain plugs on all of you pump and filtration equipment. Even a small amount of water left in a pump casing can freeze and case significant damage costing hundreds or even thousands of dollars in damage.

    Contact the irrigation experts at W. P. Law, Inc. for more information about preparing your irrigation system for freezing temperatures.

    5 Steps to Prevent Damage to Your Irrigation System during Winter

    Flip Law - Thursday, December 13, 2012
    outside temperature

    Winterizing irrigation systems using the manual drain valve method

    Irrigation systems are prone to damage in harsh winter weather. By taking the necessary steps to protect your system during freezing temperatures, you will prevent costly damage, and will be assured your system will be ready when you need it.
    If your system was installed correctly with the drain valve at the lowest point of the system mainline, you’ll be able to drain the water from the system using the manual drain valve method.

    Here are five steps to winterizing your system using the manual drain valve method:


    1. Shut off the system: Turn off the irrigation system at the main valve.
    2. Open valves: Open one of the system’s valves to release the pressure on the system’s mainline.
    3. Open the manual drain: Open the manual drain valve slowly.
    4. Repeat the process: Repeat the process on each drain valve on the system.
    5. Drain valves: Once all the water is removed, you should leave the valves open.

    By taking a proactive approach to protecting your irrigation system, your system will be ready to go when spring arrives.

    For more information about winterizing your irrigation system this winter, contact the irrigation specialists at W. P. Law, Inc.

    Preparing Your Commercial Fountains for Winter Weather

    Flip Law - Thursday, December 06, 2012

    frozen commercial fountains

    Protect your investment – winterize your commercial fountains.

    Commercial fountains add beauty and character to your commercial property. They’re an investment that needs to be protected in the cold winter months by performing proper winterization.

    Here are steps to take to protect commercial fountains in the winter:

    • Drain the water: If you fountain will not be operating during freezing weather, water that’s left inside components like the pump, control valves, pipes can freeze. When water freezes it expands, this expansion can cause damage to the components. For this reason, water should be drained from all of these components to protect them from damage.

    • Remove the pump: If possible, you should remove and clean the pump after it’s been drained of water, and place it indoors. Remove any floating devices from the water and store them inside, as well.

     • Remove debris: Remove any debris from the fountains, and any algae build-up should be cleaned away. If you are keeping water in the fountain’s reservoir, check the chemical balance and adjust if necessary.

    • Cover the fountain: If your fountain has a cover, place it over the fountain to protect it from the harsh weather.


    Contact the experts at W. P. Law, Inc. for more information about protecting your commercial fountains in winter.

    Overhead Sprinkler Irrigation to Protect From Winter Frost

    Flip Law - Monday, December 03, 2012

    project spinklers

    Overhead Sprinkler Irrigation – Helping America’s farmer’s battle frost

    Each year, America’s crops face the risk of damage from winter frosts. When the temperatures drop below freezing for a period of time, America’s farmers struggle to protect their valuable crops from damage. Using overhead sprinkler irrigation is one way farmers fight back against the harsh elements.

    While the risk varies based on the duration the temperatures remain below freezing, it’s vital for farmers to have a plan in place to protect their crops. Additionally, the effect freezing temperatures, and frost will have on crops varies depending on the type of crop. For example, fruit trees that are damaged may have a decline in the amount of fruit produced, or not produce fruit at all. Fruit or vegetables that have already blossomed can be damaged, and a large portion of the crop will be lost.

    Many farmers turn to their irrigation system to help protect crops during extended freezes. At the first sign of freezing conditions, irrigation begins to protect the crops and is discontinued when the temperatures again rise above freezing. Timing is important; if the water is turned off prematurely, crops can be damaged.

    Overhead sprinkler irrigation is a way for farmers to irrigate their crops, as well as win the battle against freezing temperatures. For more valuable information about using overhead sprinkler irrigation to protect your crops from harsh winter weather, contact the irrigation specialists at W. P. Law, Inc.

    Troubleshooting an Irrigation Valve

    Flip Law - Thursday, November 15, 2012

    irrigation valve


    Do-it-yourself repair on irrigation valves

    Having a home irrigation system for your landscaping is a great thing. No more dragging heavy hoses through your yard and struggling to water those hard to reach spots.

    There are times where you will run into problems with your irrigation system, so here is a guide to troubleshoot some common problems with irrigation valves.

    Valve Does Not Open: Check the irrigation controller to ensure that it is sending a 24 volt output to the valve. If there is not a 24 volt signal going to the valve then you have a controller problem. If the controller is sending a 24 volt signal, then go to the valve in question and check the voltage across the two wires connected to the valve solenoid. Most irrigation valve will open with as little as a 21 volt signal. If you are not getting power at the valve, then you probably have a cut wire somewhere between the valve and controller. If you have at least a 21 volt signal at the valve and it does not open then the most likely problem is the valve solenoid. Solenoids are easily replaced.

    Valve Does Not Close: The first thing to check is to make sure that the valve has not been opened manually. Next you will want to check for leaks around the solenoid or between the valve body and valve bonnet. If there are no leaks then turn off the water supply at the source and remove the solenoid and check for debris around the base. Also remove the valve cover (or bonnet) and inspect the diaphragm for damage from debris.

    Water Continues to Seep Out of Sprinkler Head After System is Off: This may not be a valve problem. Take a look at the elevation changes in your yard. If the water is seeping out of the lowest sprinkler head on a zone, then it is most likely low head drainage. This problem can be fixed by installing a Seal-A-Matic (SAM) head at the lowest point on the zone. SAM heads have a built-in check valve that prevents low head drainage. If you have water seeping out of other sprinklers as well then there is probably debris under the valve diaphragm or the valve diaphragm is damaged.

    Troubleshooting an irrigation valve problem can be a tedious task, but with a few basic tools and a little patience the problem can be detected and the repair easily made.

    W.P. Law, Inc. carries top quality irrigation systems and supplies. For a more complete valve troubleshooting guide visit our Troubleshooting Page.

    Sprinker System Maintenance and Winterization

    - Friday, November 09, 2012
    Sprinkler System Maintenance and Winterization

     When the air becomes cool, and the leaves take on their fall colors, our southern grasses begin entering into their dormant stage. Time to turn off our irrigation systems, but before you do let’s look at a few things that might make our spring start up a little less adventurous. Many of us set our timers (start times and run times) to water when we are asleep or not at home and we never see the irrigation actually operate. Often sprinkler heads are misaligned, broken or even missing and we have no idea that anything is wrong.

    Before you lock it all up for the winter, start each zone and check to see if a head needs adjusting (watering buildings and pavement provide no real benefits and actually waste water and money). Replace broken and missing heads. If you have a drip system, check and clean your filters. All irrigation heads have a screen type strainer, if a heads seems to be performing poorly, check its screen to see if it might be clogged. Also a nozzle may be stopped up.

    This would be a great time to add a rain check device to your controller in order to save money next year. A rain check would allow you to prevent watering when rainfall is available without rescheduling your timer. Some of us may have made some changes to our landscaping, and now our irrigation needs to be updated in order to better conform to the new or rearranged plant material and hardscaping. Contractors are often overwhelmed during the spring with new installations and repairs, so fall and winter are excellent times to get these renovations done.

    Exposed pipes should be wrapped with some sort of insulation or drained. Irrigation pumps and their suction and discharge lines should also be drained. The correct way to accomplish this is to remove the drain plug (lowest plug on the pump housing) and the fill plug (where you prime the pump), turn off the breaker to the pump and start the irrigation controller so that it runs all the stations (you can shorten the length of time for each station or manually run through the stations allowing a couple of minutes per zone). By using this method we assure that the drainage of water from the system is more complete.

    The suction lines of the pump are harder to drain due to the foot valve (a check valve with an intake screen). You could remove the foot valve (difficult to do), unhook the suction piping from the pump and pull it all up on shore and dump out the water or separate the suction from the pump and wrap it with an insulation. Be sure to prevent any insects or small animals from crawling into exposed openings. After taking care of the suction loosely replace both plugs and turn your controller to the off position. Your spring startup should be a lot less stressful next year.

    David Park
    W.P. Law Inc.

    Irrigation Tools and How to Use Them

    Flip Law - Monday, November 05, 2012
    shovel picture

    A list of irrigation tools for do-it-yourself installation.


    Installing an irrigation system yourself will require specific irrigation tools to do the job right.

    Here is a list of the most common irrigation tools you’ll need to install an irrigation system, and how to use them.

    Trenching Shovel: A trenching shovel will be needed to dig holes and clean-out machine-dug trenches for the irrigation pipes and valves. Its narrow blade makes this the ideal tool for this tedious job.

    Mattock: A mattock is used to dig short trenches, and the pick end works great for breaking and removing rocks.

    Tamper: A tamper bar is used to compact the soil after it is replaced over the piping.

    PVC Pipe Cutter: The PVC pipe cutter is used to cut the PVC pipe leaving clean edges.

    Hack Saw: A hack saw can be used to cut PVC pipe, as well as metal pipe.

    Wire Cutter/stripper: A combination wire cutter and stripper is used for cutting and stripping wires.

    Screw Drivers: You will need a flat screwdriver and a Phillips head screwdriver to connect the wires to the controller.

    Visit the irrigation specialists at W.P. Law, Inc. for quality irrigation supplies.

    How to Find Quality Landscape Products

    Flip Law - Thursday, November 01, 2012
    quality landscape products

    Landscape products enhance your home’s beauty.


    Finding the right landscape products to enhance your landscaping will bring value and beauty to your home. Locating quality products is important; not only do you need products that are made to last, you need to stay within your budget.

    To locate quality products, start with recommendations from family, neighbors, and friends. The internet is also a great place not only to research where to buy the products, but you can research the products, as well.

    Educating yourself on the many products that are available is a great way to begin any landscaping project. There are so many brands available today for every product imaginable it can sometimes be hard to choose.

    Working with professionals who know the best products to use on your landscaping projects will ensure you get quality products and service.

    Improve your home’s value by using quality landscaping products that will improve the curb appeal of your home, and make it the envy of the neighborhood.

    W.P. Law, Inc. carries top quality landscape products to enhance your homes beauty; from irrigation systems and supplies to water features, they carry quality name brands that bring added value to your landscape. Visit W.P. Law, Inc. today.

    3 Tips for Hiring the Right Company for Irrigation Installation

    Flip Law - Monday, October 29, 2012
    right company

    How to hire the best irrigation installation company.


    Irrigation installation is a big job, and one that needs to be done right. It’s important to hire the right company with experience and expertise. Here are three tips to ensure you hire the right one:

    1. Find out if they subcontract work: Ask if any of the work will be hired out to subcontractors. Is they do, ask for information about the companies they will use. 

    2. Meet with multiple companies: Get written quotes from at least three different companies. Ask questions of all of them and then compare the prices, experience and what they offer. Remember, the cheapest price isn’t always the best option.

    3. Ask questions: Make a list of questions to ask before you call the irrigation installation company. To help, here are some suggestions.

    • Are you licensed and insured?

    • What brands of products do you install?

    • How many years have you been in business?

    • Do you guarantee all work?

    • Do you have references?

    • What is the system warranty?

    • Can I get a written estimate?

    • Do you pull the necessary permits?


    Contact the irrigation experts at W.P. Law, Inc. for help in selecting a qualified irrigation contractor.

    What are the Right Irrigation System Components for Your Farm?

    Flip Law - Monday, October 22, 2012
    system components

    4 Types of irrigation systems for farms.


    Irrigation is vital when it comes to providing the required water your crops need. With most of our nation still in the grips of one of the worst droughts in our history, many farmers are installing irrigation.

    Researching the right type of irrigation system for your farm is the first step to ensuring you are getting the best irrigation for your particular crops. You also want to consider the major system components, how they operate and their long term reliability.

    Here are four irrigation systems options to consider:

    1. Pumping stations: Water is typically pumped from a nearby body of water and carried through piping to irrigate crops. There are many options to choose from when it comes to pumping stations. What is my power source, diesel, propane, or electric are all options? Will the pump station be operated manually or automatically? What is my water source, lake, river, pond, or well?
    2. Overhead irrigation system: Overhead irrigation systems include impact sprinklers, Big Gun® sprinklers, traveling guns, and center pivots. These systems provide irrigation by applying water over the crops.
    3. Low volume and drip irrigation systems: Low volume irrigation systems include both drip and micro-sprinkler systems. These systems apply water under the crop canopy at a very slow application rate compared to overhead irrigation systems. Low volume systems are much more efficient and use less energy to operate than traditional overhead irrigation systems.
    4. Filtration system: All drip irrigation systems require some type of filtration. The type of filtration required depends largely on the water quality and type of irrigation system. The filtration system is not the place to pinch pennies and try to save a buck. A quality, reliable filtration system will pay for itself many times over by preventing plugged emitters and other problems.


    Contact the irrigation specialists at W.P. Law, Inc. to find out what type of irrigation system is right for your farm.

    Contact the irrigation design experts at W. P. Law, Inc. today.

    Choosing the Right Irrigation Products for Your Landscape

    Flip Law - Thursday, October 18, 2012

    Products by Rain Bird Corporation offers quality and conservation.


    If you’re in the market for an irrigation system for your landscape, consider products manufactured by Rain Bird. They proudly manufacture a complete line of irrigation and sprinkler system components. Rain Bird has won several awards for innovation and water conservation. Their motto is "The Intelligent Use of Water”™.

    Their product line includes:

    • Irrigation Controllers
    • Pop-up Rotary Sprinklers
    • Pop-up Spray Heads
    • Irrigation Valves
    • Drip Irrigation Components
    • Sprinkler Accessories
    • Pump Stations


    Rain Bird’s manufactures products for residential, commercial, and sports field irrigation applications.

    W.P. Law, Inc. is proud to be a Rain Bird Master Distributor. In addition to Rain Bird, W. P. Law, Inc. also carries products manufactured by Weathermatic, Berkeley Pump, Acclima, Amiad, Filtomat, Goulds Pumps, Jain Irrigation Inc., Kifco, Munro Companies, Nelson Irrigation, Rainbow Irrigation Systems, Sta-Rite, Sure-Flo Fittings, and Tucor Inc.

    Contact the irrigation design experts at W. P. Law, Inc. today.

    Garden Watering Solutions

    Flip Law - Monday, October 15, 2012
    watering solutions

    3 Garden watering solutions for your home garden.


    There are many types of garden watering solutions for your garden, finding the one that’s right for you will help ensure a healthy crop.

    Here are three watering solutions for your home garden:

    1. Drip irrigation: Drip irrigation is a great solution for irrigating your garden. The water drips directly to the root where it is most needed. Drip irrigation is one of the most popular watering systems for gardens. It eliminates waste and helps you conserve water, while providing your garden with the irrigation it needs to thrive.

    2. Sprinkler systems: Sprinkler systems come in a variety of sizes and styles. They are highly effective for gardens grown in soft soil, however, clay soil, or sloped gardens will tend to have problems with water loss due to run-off.

    3. Micro-Sprinklers: A micro-sprinkler is a small sprinkler that is mounted on a stake about 12-15 inches tall. Like drip irrigation, a micro-sprinkler irrigation system eliminates waste by applying small amounts of water in close proximity to the soil. This low-level application reduces overspray and water loss due to evaporation.


    For quality garden watering solutions, visit the irrigation experts at W. P. Law, Inc. Their certified irrigation designers and specialists will help you meet all of your irrigation needs.

    Contact the irrigation design experts at W. P. Law, Inc. today.

    Landscape Irrigation for Water Conservation

    Flip Law - Monday, October 08, 2012
    water conservation

    Consider landscape irrigation technology to help conserve water while improving your landscape.


    Homeowners and businesses alike have thousands of dollars invested in their landscape. The past few years have seen limited and irregular rainfall that has caused extended drought conditions in many areas. In response to these water shortages due to the drought many water purveyors have been forced to impose water restrictions. The dilemma for homeowners and businesses is how do I protect my landscaping investment during this time of drought?

    Fortunately, advanced technologies have created components that aid in water conservation. There are several types of systems available that eliminate wasting one of our most precious resources. As an added bonus, saving water, also allows you to save money.

    Drip irrigation has been used in farming since the 1940’s. However, its use in landscape irrigation has only been widespread in the last 30 years. Drip irrigation is ideal for foundation plantings and ground covers. Drip irrigation’s low application rate also makes it ideal for use on planted slopes. Drip irrigation is also an easy retro-fit for older systems that use fixed spray heads to irrigate plantings. Drip retro-fit kits are available from several manufacturers to convert these older spray systems to drip irrigation.

    “Smart Controllers” are a relatively new technology for the residential irrigation system. Smart controllers utilize data collected from an on-site weather station, soil type, geographical location, and historical data to calculate the run-time for each zone. This technology has been around for several years, but was mostly utilized on large commercial properties and golf courses. As the cost of this technology has come down in price over the years it is now affordable for residential sprinkler systems. Smart controllers can help the homeowner reduce water usage for irrigation by 30-50 percent.

    When prolonged drought and water restrictions occur, there are options that will allow you to keep your landscape looking great and do your part in conserving water.

    For top quality landscape irrigation supplies, visit the irrigation specialists at W.P. Law, Inc. They carry a wide variety of brand name irrigation systems and accessories.

    Visit W. P. Law, Inc.

    3 Tips for Finding a Quality Irrigation Supply Company

    Flip Law - Thursday, October 04, 2012
    quality irrigation

    Finding a quality irrigation supply company is vital to success with your farm or landscape.


    Irrigation is an important part of landscaping and farming that’s why finding a quality irrigation supply company is so important. Without the right irrigation, lawns, plants and crops will die.

    Here are three tips for finding a quality irrigation supply company you can rely on:

    1. Ask questions: Before calling the irrigation supply company, make a list of questions you need answered. A list of possible questions could include:

    • What brands of products do you sell?
    • What services does your company offer?
    • Do you stock irrigation supplies year-round or just seasonally?
    • Do you offer system design?
    • Are your designers certified?
    • Do you offer field service?

    2. Ask for references: Ask the company to provide you with a list of references. Make sure you call the references and ask them if they were completely satisfied. Call at least two or three people; every experience is different.

    3. Check with the Better Business Bureau: Inquire with the BBB to see if any complaints have been filed against the company. If so, find out how they were handled.


    For more information about irrigation supplies, visit the irrigation experts at W. P. Law, Inc.

    Two Common Irrigation Pipe Problems

    Flip Law - Monday, September 24, 2012
    common irrigation pipe problems

    Repair of broken or damaged irrigation pipes.


    Damaged or leaking irrigation pipes not only waste water but can cause problems with how your irrigation system performs. The first sign of a leaking pipe is usually a wet area in your yard that never seems to dry out. Digging in this area is usually the first place to start when looking for the source of the leak. Depending on the soil type and the typography the source of the leak may be several feet from the identifying wet spot. Once you have identified the source of the leak, you can now evaluate your repair options.

    Here are two common irrigation pipe repair methods.

    1. Cracked or split pipes: Leaks resulting from cracked or split pipes can usually be repaired using epoxy coated fiberglass wraps. These repair kits contain an epoxy resin and a fiberglass mesh that is wrapped around the pipe. When the epoxy cures the leak is fixed. This type of repair is used primarily when the leak is small and removing the damaged section of pipe would be difficult (i.e. around a valve manifold). When using epoxy fiberglass repair kits always follow the manufacturer’s instructions and wear hand and eye protection.

    2. Broken or severely damaged pipes: If a pipe is completely severed or has a portion missing then the damaged piece of piping needs to be replaced. Telescoping couplings make this repair much easier. After removing the damaged section of piping, the telescoping coupling is compressed to fit into the space left by the removed section of piping. The telescoping coupling is expanded and glued into place. Telescoping couplings are also known by trade names such as Flo-Span®, Pro-Span®, and Slip-Fix®, to name a few.

    Damaged pipes can easily be repaired using materials purchased at an irrigation supply company.

    For all of your irrigation supplies, visit the experts at W. P. Law, Inc.

    Troubleshooting Your Sprinkler System

    Flip Law - Thursday, September 20, 2012
    sprinkler system

    Sprinkler system weak spray could indicate broken pipes.


    Automatic sprinkler systems are vital to properly maintaining your lawn and landscaping. Knowing how to troubleshoot your system yourself will help save money on repairs. Most sprinkler system repairs can be done yourself but some issues may require a professional.

    Here are some of the common problems you may encounter with your sprinkler system.

    • Weak spray: The most common cause of weak spray is low pressure. If a system has been operating without any problems for some time and suddenly has a weak spray problem, then a leaking pipe is usually the culprit. Another likely cause is rocks or other debris that has become lodged in the solenoid valve. This is especially likely if you have recently performed a pipe repair.

    • Irregular spray patterns: If you notice irregular spray patterns, check for debris partially blocking the sprinkler nozzle. Many sprinkler heads also have a screen at the inlet or just below the nozzle to trap debris. Removing the nozzle and flushing the system will usually solve this problem.

    • System not turning on: Check to be sure the main valve is turned on. If you know you have water then the problem is most likely a controller, wire, or valve issue. Most of the time you can troubleshoot this with a basic volt-Ohm meter. First check the programming on the controller to ensure it is right and make sure that it is sending a 24-27 volt signal to the valve. If everything is working at the controller, you next want to check to see if you are receiving a 24-27 volt signal at the valve. If you are receiving power at the valve then the most likely culprit is a bad solenoid. If you are not receiving power at the valve then you most likely have a damaged or broken wire. At this point you may be better off calling in a professional irrigation contractor to troubleshoot and repair the system. Most contractors have equipment for locating damaged or broken wiring.

    For the best irrigation services, contact the experts at W. P. Law. Inc.

    Automatic Watering System FAQ's

    Flip Law - Thursday, September 13, 2012
    automatic watering system

    An automatic watering system conserves water and saves you money.


    What time should I water my lawn? Your lawn should be watered in the early morning hours before the sun comes up and the wind is at its calmest. Set your automatic watering system to water the same time each morning.

    Does a sprinkler system conserve water? Yes, by setting your sprinkler systems to turn on and off automatically, you are conserving energy and resources. There is no need to remember to turn the sprinklers off they will go off automatically, so you are not wasting water by over watering.

    Should I install rain sensors? Rain sensors are a wonderful idea and will conserve water when Mother Nature decides to provide the irrigation.

    Should I break my landscaping into zones? Zoning is a great way to provide the right amount of water for each area of your landscaping. For example, shady areas don’t require as much irrigation as sunny areas do. Flower beds may not require as much water as your lawn. Zoning allows you to separate these areas and give them the perfect amount of water needed.

    For the answers to all of your questions about an automatic watering system, contact the professionals at W. P. Law, Inc.

    Which Lawn Water System Is Right for You

    Flip Law - Monday, September 10, 2012
    lawn water system

    Designing the right lawn water system leads to a thriving landscaping.


    Designing a lawn water system that is right for your irrigation needs is the first step to ensuring your lawn and garden thrive, even during the toughest drought conditions recorded. There are plenty of different types of watering systems to create a custom system that will keep your lawn, gardens and flower beds thriving.

    • Flower beds, potted plants, hanging baskets, and landscape borders: Drip irrigation is ideal to use in beds, borders, and potted and hanging plants. Drip irrigation slowly drips water directly to the roots of your plants helping to create a healthy root system.

    • Lawns: Pop-up sprinklers are great for lawn and garden irrigation. Pop-up sprinklers have become a popular choice of homeowners and business owners for lawn irrigation. They are convenient and disappear when not in use.

    • Vegetable gardens: Drip irrigation and garden micro-drip systems are a popular choice for vegetable gardens and for use in indoor greenhouses.

    By installing an automatic lawn water system, you will save money and time, and provide your landscaping with the right amount of water to flourish and grow healthy.

    To find out which lawn water system is right for you contact the irrigation specialists at W. P. Law, Inc.

    Underground Irrigation Systems for Your Sports Facility

    Flip Law - Thursday, August 16, 2012

    3 Reasons you should install an underground irrigation system

    Underground irrigation systems are the ideal solution for irrigating your sports facility. The irrigation system at your facility needs to provide your turf with the water necessary for it to flourish.

    1. Provide ultimate growing conditions for your turf:
    To maintain healthy turf, it’s vital to carry out routine irrigation. Turf needs water to survive and thrive, with the increase of droughts, relying on nature to supply your turf with the right amount of water isn’t the best choice. Installing underground irrigation for your facility will provide the necessary irrigation to keep your turf green and healthy.

    2. Keep irrigation equipment out of the way: Underground irrigation keeps the equipment underground where it is safe from getting in the way of sports and other activities. This not only protects the equipment from damage, but protects the athletes and visitors from injury.

    3. Appearance: Irrigation equipment sprawled over a sports facility is unsightly and unattractive. Underground equipment keeps the field clear, which results in an attractive and well-kept look.

    Contact the irrigation specialists at W.P. Law, Inc. today to learn more information about installing underground irrigation at your sports facility.

    Irrigation Timer - When is the best time to water your lawn

    Terry Brady - Monday, July 16, 2012

    Irrigation timer – Quality tips to help keep your lawn green and healthy.

    Watering your lawn and garden are important to keep it green and healthy. With so many worries about drought conditions and water restrictions placed upon homeowners year after year, it’s sometimes difficult to keep you lawn irrigated.

    Here are some helpful tips for keeping your lawn and garden irrigated.
    • Water your lawn in the early morning: You should set your timer to water by 5:00am in the morning. This way the water has time to soak into the ground before the sun’s rays evaporate it and the winds begin to blow. Early morning watering also allows the grass to dry during the day which reduces disease problems.
    • Water your lawn 1” every week: To gain optimal results for you lawn, you should opt for the long infrequent soaking rather than a little each day. Your lawn should receive at least 1” of water each week to stay healthy. Newly planted lawns will require watering each day to encourage growth for at least 6-8 weeks.
    • Use an irrigation timer: For best results, you should set up a timer with your irrigation system. It helps you conserve water and relieves you of the duty of remembering to turn the system on.

    Let the experts at W.P. Law, Inc. take care of your irrigation timer needs.

    Irrigation Contractors - 5 Tips to hire the right one

    Terry Brady - Thursday, July 05, 2012
    which irrigation contractor best fits your needs?

    Follow these tips to help you find an irrigation contractor that best fit your needs.

    Irrigation plays a vital role in keeping your lawn and garden healthy and lush. In order to find the right company to design, install or purchase your system, follow these five tips.

    1. Hire only licensed contractors: You should always hire a licensed contractor. Also, make sure they are properly insured and bonded. Contact your area’s licensing board to verify their license is active. In addition, check with the Better Business Bureau to see if any complaints have been filed or are outstanding.
    2. Get it in writing: Always get your estimate in writing and if there are any changes to the work order, get them in writing as well. If the company offers a guarantee on their work, make sure it is in writing.
    3. Ask for references: Contractors who do quality work are proud of that fact and don’t mind giving you a list of satisfied customers for you to contact.
    4. Get estimates from at least 3 companies: After you have researched the irrigation companies in your area and are satisfied with the results of your search, you should contact at least three companies for estimates. The more estimates you get the more you will be assured you are getting the best price and have picked the best company to hire.
    5. Don’t always go with lowest price: If your three estimates are close in price to each other then it’s probably okay to go with the lowest price. However, if two of the estimates are close together and the third is considerably lower, then you would be wise to avoid the lowest price. This contractor’s price may be low because he plans on cutting corners or using products that are of poor quality.

    Let the irrigation specialists at W.P. Law, Inc. handle all of your irrigation needs.

    July is Smart Irrigation Month

    Flip Law - Monday, July 02, 2012
    Jult is smart irrigation month

    July is the ideal time for water conservation

    July is designated as “Smart Irrigation” month by the Irrigation Association (IA). The IA is a membership of the leading irrigation equipment manufacturers, distributors, contractors and other green industry professionals. Smart Irrigation month was developed to bring awareness to water conservation practices and products. Irrigation innovations such as drip irrigation, smart controllers, and moisture sensors, to name a few, have been developed to conserve our most precious natural resource, water.

    To view the history of irrigation and how technology has improved, visit the Irrigation Museum. The Irrigation Museum is a virtual online museum promoted by the IA. W. P. Law, Inc. is proud to be an online sponsor of the Irrigation Museum.

    For all of your irrigation needs and information on “smart irrigation” products contact the experts at W.P. Law, Inc.

    Irrigation Filters Keep the Water Flowing

    Flip Law - Monday, June 11, 2012

     

     Irrigation filters protect and add longevity to an irrigation system.

    Irrigation filters protect system components from organic matter and other debris.  Drip irrigation systems are susceptible to plugging caused by organic material such as algae.  Conventional irrigation system components can become worn or damaged by sand and other debris.  A properly selected irrigation filter can remove this material and keep the system operating at peak performance There are several types of irrigation filters depending on your particular system. Four types of filters are:

    • Centrifugal filters: The water is spun through a cylinder.  Centrifugal force causes the debris to collect on the outside of the cylinder and gravity forces it in a collecting tank.  This tank is periodically flushed to remove the debris.  Centrifugal filters work especially well for removing sand from well water.
    • Disk filters: Disk filters are a series of grooved disks that stack on top of each other. As the water passes through the filter, the discs capture the debris and other organic material.
    • Media filters: Media filters are large filters that work great removing organic material. They consist of large tanks that are filled with some type of media (usually sand).  The water is filtered as it flows through the media.
    • Screen Filters: Screen filters are used to remove organic and inorganic particles.  Screen filters are easy to clean and service compared to disc and media filters.

     Whatever type of irrigation system you have, you need to keep your filters clean so that they properly operate and clean your water supply. The irrigation specialists at W. P. Law, Inc. will be happy to provide you with the right type of irrigation filters for your specific needs.

    For all of your irrigation supply needs contact the irrigation experts at W. P. Law, Inc.

    Water Pump Stations for Home Irrigation

    Terry Brady - Sunday, April 29, 2012

    Water pump stations are being used by more homeowners for their lawn irrigation.



    If you are planning an irrigation system for your home lawn and garden and you have access to a pond, lake or stream, you may want to consider having a water pump station installed. If you have a viable water source on your property, small, pre-packaged pump stations designed for residential use are readily available.

    These scaled-down pump stations can supply water to your irrigation system for pennies on the dollar compared to buying water from your local water purveyor. In addition to being more cost effective, they are also more eco-friendly because you are not using water that has had to go through the treatment process.

    Contact a professional irrigation specialist to determine the best system for your particular needs. There are many factors that need to be taken into consideration including local permitting and code requirements.

    For more information about the use of water pump stations for your home irrigation needs visit WP Law today.

    Drip Irrigation Products can Help You Become More Water Efficient

    Terry Brady - Sunday, April 15, 2012

    Drip irrigation products mean no more lugging hoses all over your yard.



    If you’re tired of dragging a heavy sprinkler hose from one area of your lawn to another day after day, it may be time to consider installing an irrigation system. With our natural resources being depleted at alarming levels, you may want to consider becoming more water efficient and using a watering system that conserves water.

    Conventional lawn sprinkler systems can be inefficient and waste water. The performance and efficiency of lawn sprinkler systems can be greatly improved by the use of “smart controllers”. Smart controllers utilize a weather station to monitor conditions and adjust the system run-time as needed. Systems with smart controller can reduce their water usage by 30-50%.

    When it comes to the landscape, drip irrigation is the way to go. Drip irrigation applies water near the root zone at a slow rate which results in less runoff and less evaporation. Drip irrigation is ideal for foundation plantings around your home. The lower application rate prevents problems resulting from too much water around the foundation, such as wet crawl spaces, damp basements, and termites.

    For more information about drip irrigation products to help you become more water efficient, contact the pros at W.P. Law, Inc. and let them design an irrigation system to fit your watering needs.

    How to Install Garden Drip Systems This Spring for Healthy and Vibrant Plants

    Flip Law - Wednesday, April 11, 2012

    Garden drip systems installed in your home garden can save you time and money.



    installing garden drip systemInstalling a garden drip system for your home garden is an excellent way to provide the water needed for healthy and vibrant plants this spring. Drip systems feed the water directly to the root system to provide the most effective watering. Here is a quick guide on how to install your system.

    • Determine your garden layout by counting the number of rows and measuring the length of each row. There are several pre-assembled kits available, knowing the size of your garden will help you select the right one.

    • Lay the drip tubing (or drip tape) down each row alongside the plants. This line is called the lateral and it connects to another tube that is perpendicular to the rows. This perpendicular line is called the header.

    • A pressure regulator and wye filter are connected to the header. These devices control the pressure and remove small particles and debris that can clog the small drip emitter orifices.

    • Once everything is installed you can connect the header to a garden hose and you are ready to go.

    • Garden drip systems can be made even more efficient by installing a garden hose timer and fertilizer injection system.

    A drip system can save you precious time and help you conserve water. Before you install your system, check with the professionals at W.P. Law, Inc. for complete details about which irrigation system is best for your garden. You may decide you’d rather leave installation to the pros – and we can help with that, too.

    For more information about installing a garden drip system contact the pros at W.P. Law, Inc.

    Automatic Plant Water System - Is This the Best Way to Water Your Garden?

    Terry Brady - Sunday, April 08, 2012

    An automatic plant water system can save you valuable time and money by doing the watering for you.



    automatic watering systemIt’s springtime and like most homeowners you may be busy planning your garden and landscaping for the upcoming season. Don’t forget about the irrigation systems. A happy and healthy garden needs water, and with the crazy weather patterns we have been experiencing, you can’t always rely on nature to do the watering for you.

    To make your watering easier, consider installing an automatic plant water system. Here are a few reasons an automatic system is the way to go:
    • Conserves water and money: Setting your automatic system to water for the appropriate amount of time can help to conserve water. By sticking to the set watering schedule you not only save water, but save money as well.

    • Saves time: No more dragging heavy hoses around your garden to water. The automatic system will do the watering for you so you can focus on other tasks that need to be done.

    • Set it and forget it: With the automatic system set to water on schedule, there is no need to worry about forgetting to water your garden, it does it for you.

    • Contact the irrigation specialists at W.P. Law, Inc. for more information about automatic watering systems.

    Drip Irrigation - Is This the Best Choice for You?

    Terry Brady - Sunday, April 01, 2012

    Drip irrigation is the perfect irrigation method to help you conserve water and direct the water where it is needed.



    best drip irrigation choiceIf you have a garden and are wondering what is the best irrigation method to use, consider drip irrigation. Using the right irrigation system for your specific needs will help you conserve water, save money and get the water exactly where it is needed, the root zone.

    It seems that year after year we are under strict water restrictions because of drought conditions. To do your part in water conservation, use the irrigation system that can help you conserve water and give your garden the water it needs where it is needed most.

    Traditional sprinkler systems are much less efficient because a lot of the water is lost due to evaporation and runoff. Wind also affects traditional sprinkler systems by blowing the water where it isn’t needed leaving some areas without the appropriate amount of water. Delivering the water directly to the root zone is the most efficient way to water.

    To find out whether a drip irrigation system is the best choice for your irrigation needs, let the experts at W.P. Law, Inc. advise you on what will work best.

    A Drip Irrigation System: How does it work?

    Flip Law - Monday, March 26, 2012

    Using a drip irrigation system for irrigating gardens and flower beds ensures the water goes where it is needed.


    drip irrigation systemAs you are planning your spring planting don’t forget to plan for an irrigation system. There are several different types of irrigation systems that work well but for now let’s focus on the drip irrigation system and how it works.

    The drip irrigation system delivers the water directly to the base of the flowers and plants. The water is slowly dripped at the base of the foliage which allows for the plants to slowly take in the needed water.

    Drip irrigation systems work great for farms and small gardens, but are also great for using in flower beds and under trees and shrubs. Drip irrigation can also be used in hanging baskets and container gardens as well.

    Drip irrigation systems are very ecofriendly because the water is dripped exactly where it is needed, less water is used. Additionally, by keeping the excessive water off of the plants it helps to prevent the invasion of many different pests and disease that can cause damage to the plants.

    To find out more information about drip irrigation systems and information about pricing contact WP Law today.

    Your Lawn Sprinkler System - 4 Pumps to Choose From

    Flip Law - Thursday, March 15, 2012

    When you’re creating your lawn sprinkler system, choosing the right pump makes a big difference.


    lawn sprinkler systemHomeowners, who have a well or have access to surface water such as lakes, ponds, or streams, can save money by using a pump to supply their lawn sprinkler system. In some cases a permit must be obtained before accessing a public water source, these permits are usually easy to obtain and are in most cases relatively inexpensive. The cost savings realized with using a pump system compared to the cost of using a municipal water source can be significant. These cost savings easily offset the initial investment of the pump, usually providing a payback of 1-2 years.

    When selecting a pump, it is best to consult with an irrigation professional. There are several pump options to choose from depending on your water source. Here are four to consider.
    • Centrifugal Pumps: A centrifugal pump is the most commonly used sprinkler irrigation pump. Centrifugal pumps are typically used to pump out of lakes, ponds, or streams. They are usually placed on shore and a suction pipe is run from the pump out into the water source. Centrifugal pumps must be primed (pump casing and suction line must be filled with water) before using.
    • Submersible Pump: A submersible pump is placed into the water source. Submersible pumps are usually used in wells but can be placed in ponds and lakes (check local electrical codes before doing this) if a water induction sleeve is used. Submersible pumps do not need to be primed since the pump intake is submerged in the water.
    • Self-Priming Centrifugal Pump: A self-priming centrifugal pump works the same as a standard centrifugal pump. The pump casing is larger and is designed to act as a tank to keep the pump impeller submerged. Despite what the name implies, the pump casing on self-priming pumps does need initial priming.
    • Booster Pump: A booster pump is usually a centrifugal pump that is installed in a municipal water line. Booster pumps are used when the water pressure is very low to increase the pressure.

    For professional help choosing a sprinkler pump or designing a lawn sprinkler system, contact WP Law today.

    Drip Water Systems - How Landscape Professionals Celebrate Plant a Flower Day

    John Boazman - Monday, March 12, 2012

    Drip water systems help to maintain a healthy and lush landscape so you can celebrate Plant a Flower Day knowing your flowers will flourish.


    plant-a-flower-dayToday is Plant a Flower Day, so how are you going to celebrate it? A lot of landscape professionals take advantage of this day to help their clients create beautiful landscapes for their yards by planting beautiful flower beds.

    To go along with their new landscapes don’t forget about the yard’s irrigation needs. In order for landscapes to flourish, proper watering is necessary. Drip water systems are perfect to install in flower beds.

    Drip water systems help your clients save money and time. An added benefit of the drip system is that it conserves water to make for an ecofriendly landscape. By placing the system on a timer the homeowner won’t have to be bothered with remembering to turn the water on. The flower beds are guaranteed the water that is needed to grow healthy, beautiful flowers.

    The drip system applies the water to the root system where the water is needed. Plants are healthier and are less prone to diseases caused by too much moisture. So on this Plant a Flower Day, join the other landscape professionals and plant some flowers! To find out more about drip water systems contact us today!

    Garden Drip Irrigation Systems - Top 3 benefits you’ll enjoy

    Flip Law - Thursday, March 01, 2012

    Garden drip systems will help keep your garden green while conserving water.

    garden drip irrigation systemWith spring just around the corner it’s time to start planning for your home garden. During the planning stage, be sure to plan for an appropriate watering system. Garden drip systems are an excellent choice and have several benefits, here are the top three.
    • 1) Conserves Water: Because a garden drip system slowly drips water directly on to the root zone of the plant, it reduces the amount of water that is needed. This will help to create a healthier plant. By going directly to the root, the water isn’t as exposed to the elements therefore evaporation is limited.

    • 2) Keeps Plants Healthier: Garden drip systems can help keep plants healthier and reduce the possibility of disease. Many plants are prone to disease caused by too much moisture. Because the water is directed toward the root, the moisture stays off of the plant.

    • 3) Saves Money & Time: Because less water is used, you will save money on your water bill. By placing the system on a timer, you won’t have to take time out of your busy schedule to water. Additionally garden drip systems are ideally suited for injecting water soluble fertilizers.


    For more information and pricing visit our garden drip system page.

    NDS EZ-Flow Drain Pipe

    - Friday, February 17, 2012

      W.P. Law Inc. is now stocking a drainage product that will make French drains a piece of cake. EZ-Flow drain pipe will not only save you time, money, and equipment cost, it will increase your profit on drainage jobs.  With EZ-Flow drains ease of installation, minimal equipment need, and not needing gravel delivered to the work site, it will allow contractors that have not engaged in offering French drains to now do so.

    EZ-Flow drain pipe will be a welcome product to the contractors doing crawlspace drainage. No more carrying gravel under the house in 5 gallon buckets, just carry the pipe and its self contained aggregate with you and place in the trench. Working in those tight spots will no longer be as challenging or time consuming. Stop by your local W.P. Law branch and take a look at your new money maker.

     

    Steve Richardson

    Remote Control for Your Irrigation System

    - Friday, February 17, 2012
                

    You have a T.V. remote, a stereo remote, ceiling fan remote, garage remote, car remote and maybe some of you even have remotes for your spouse and kids…so why not an irrigation system remote?

    Today’s technologies are ever evolving and attempting to make our lives easier in this fast- paced rat race we constantly try to survive in. Irrigation systems are not what they were ten years ago, even five years ago!  Irrigation has become more automated and is advancing just as computers, cell phones, and televisions have in recent years.

    Manufacturers now have hand held remotes (ie. Rain Bird LIMR  and Weathermatic SLRC-KIT-HUB) that can be used to retrofit to their controllers so that with relative ease and reasonable cost you can sit on your porch and turn on your irrigation system. You can advance through the zones and programs to check the system and locate valves for troubleshooting.  If you are out of town frequently, there are systems that can be monitored and controlled using a computer that has internet access, a phone line, ethernet and in some cases a smart phone (ie. Tucor: RKS ,RKD, and TWC or Rain Bird IQ ).

    These systems will allow you to change schedules, programs, run diagnostic test, set-up safeties to guard against leaks, log data, and contact you if there is a problem. There are also controllers that are called “smart irrigation controllers” that know what the weather is in terms of temperature, rain, humidity, and wind. As well as, they know what type of grass, soil, and sprinkler heads are in your yard. These “smart controllers” decide how long your system needs to run in order to apply the correct amount of water for your grass and plants’ needs. (ie. Weathermatic Smartline, Rain Bird  ESP-SMT, and Tucor)


    Your property is very valuable to you monetarily and aesthetically. Keeping it up can be very rewarding, but also take-up a considerable amount of your precious time. Upgrading your irrigation system with some type of remote system can make your life easier and even your yard greener.

    If you would like more information on ways to remote your irrigation system, please visit our website at www.wplawinc.com or call one of our local offices.

     

     

    Stephen Sprouse

    Frost Proof Hydrants

    - Monday, October 24, 2011
    Frost Proof Hydrants

    Need to use outdoor hose faucets in the winter?  The frost proof hydrants is a simple solution to frozen outdoor faucets. A frost proof hydrant has a valve that is located below the freeze level in the bottom of the unit. This valve allows the water to drain out of the pipe that is subjected to the freezing temperature above ground. 

    The frost proof hydrants can be bought in various lengths to accommodate the height needed for the hose attachment. Frost proof hydrants are used a lot on farms where livestock watering is needed year around. You will also find them in various municipalities where they are needed to fill containers in freezing temperatures.

    Steve Richardson
    W.P. Law Inc.

    Dirty Water Irrigation Control Valves

    - Friday, July 22, 2011

    Dirty Water Irrigation Control Valves


    Dirty water irrigation control valve. If your standard irrigation control valves are failing to turn on or turn off due to dirty water, look into using the Rain Bird PESB scrubber series of dirty water control valves. The plastic scrubber on the valve scrapes the stainless steel screen to clean and break down grit and silt material each time the valve is actuated. This prevents debris build up and clogging.


    The valves also have a manual external bleed that permits flushing of debris from the system during start up and after repairs. The Dirty water irrigation control valves are available in 1”, 11/2”, and 2” sizes.

    Contact your local W.P. Law Inc. about any questions or applications for Rainbird PESB scrubber valves.

    Steve Richardson

    W.P. Law Inc.


    Impact Rotor Sprinkler Troubleshooting

    - Friday, July 08, 2011

    Impact Rotor Sprinkler Troubleshooting

    If your impact rotor sprinkler head has stopped rotating or having trouble reversing, here a couple of things you can check for.  A grain of sand or debris in the nozzle vain or the PJ tube can cause the head not to rotate or prevent the impact arm from having enough force to drive the head throughout its entire pattern.

    The nozzle can be removed on most impact rotor sprinklers allowing you to clean the nozzle vain by inserting a small wire or paper clip to push the debris loose. The PJ tube is found on the arm of the impact sprinkler. It is a very attractive place for insects to build a nest. The nest will cause a blockage or reduction in the amount of water flow passing through this tube. The tube can be cleaned the same way as the nozzle vain.

    Another problem that happens is sand or silt getting into the bearing nipple washers. These are the washers that are located near  the male thread of the impact sprinkler head. These washers serve two purposes. They provide a seal to the water being supplies to the head, and also serve as the slick surface to provide rotation of the head. 

    You can clean the debris out of the washer by washing them with water.  Do not use petroleum products on the washers; they are designed to be water lubricated only. Petroleum products will cause damage to the washers and will eventually cause the Impact rotor to stop turning.

    Steve Richardson

    W.P. Law Inc.


    Backflows for Irrigation

    - Friday, July 01, 2011
    Backflow Prevention Devices for Irrigation Systems and Why They are Needed

    The laws vary from state to state and even among municipalities, but everyone requires that a backflow prevention devise be installed on any type of cross connection made to the municipal water system. This includes all irrigation systems. Backflow prevention devises are life savors. They prevent hazardous materials such as lawn chemicals and fertilizers from entering the drinking water system. Backflow devises have a testing requirement and should be tested to the standards of your municipality when required. Making sure your backflow prevention device is working properly is insurance to your families safety and drinking water supply.

    Steve Richardson
    W.P. Law Inc.

    Waterproof Wire Connectors for Irrigation Valves

    - Friday, June 24, 2011

    Waterproof Wire Connectors for Irrigation Valve


    Waterproof wiring connectors should be used on all irrigation wire connection that is underground or in any environment that could become wet. Most irrigation control valve connections are made in a valve box. The valve box will fill with water during rainfall as well as when the irrigation system is running. This will cause wire connection that are not water proofed to be exposed to the water. This will cause shorts and corrosion of the wires.


    The water proof wiring connectors used on irrigation wiring serve two purposes. They provide and insulation to the water, and also help to prevent oxidation / corrosion to the wire connections.  Water proof wiring connection is a must on all wire connections used throughout the irrigation system for that reason.

    Steve Richardson

    W.P. Law Inc.

     

    Irrigation Valve Repair

    - Friday, June 17, 2011
    Irrigation Valve Repair

    Repairing irrigation control valves is a pretty simple thing. The first thing that you should know is that no matter what brand valve it is, almost every repair can be made without cutting the valve from the line.

     Irrigation control valves are pretty simple devices. They consist of a solenoid, diaphragm, and the body.  Trash in the valve is responsible for 95% of the problems these valve encounter. The other 5% would be a burnt out solenoid, old or damaged diaphragm. This repair requires replacement of the bad component. The sand or trash related problem fix is as simple as removing the parts, washing out the sand or debris and reassembling the valve. Repairing irrigation valves is a job most anyone can do.

    For additional information on troubleshooting irrigation valves, click the link below:

    Irrigation Valve Troubleshooting

    Steve Richardson
    W.P. Law Inc.

    Treating Ugly Rust Stains from Irrigation Water

    - Friday, June 17, 2011
    How do I treat and prevent these ugly rust stains on my driveway and foundation?

    We all take pride in our homes and that includes the landscape as well.  We spend a lot of time, money and effort to try and make our lawns as beautiful as possible.  It is very frustrating when our irrigation system sprays on our driveway and foundation and produces those ugly rust stains.  It really takes away from the beauty of our homes.  So what can we do about it?

    Rid O’ Rust Stain Remover will remover will get rid of those unsightly stains.   Simply apply Rid O’ Rust Stain remover with a tank sprayer, roller, or brush and watch those stains disappear.  It really is that simple.

    Now that we have gotten rid of those stains, how do we prevent them from reoccurring?  The first step is to stop into your local W.P. Law Inc. and get a free well water sample bottle test kit.  Fill the bottle with your water sample, fill out the information on the form and send it off to Rid O’ Rust.  Rid o’ Rust will analyze your water sample and tell you exactly what is needed to prevent the staining.  Once you know what you need, come into W.P. Law Inc and our expert staff will help you with your new Rid O’ Rust system.   

    Don’t let the beauty of your landscape be hindered by ugly rust stains.  Let Rid O’ Rust and W.P. Law Inc. help you have the best looking landscape in your neighborhood.

    Don Martine
    W.P. Law Inc.

    Repairing PVC Irrigation Pipes and Water Lines

    - Friday, May 20, 2011

    Repairing broken water line and irrigation pipes.

    Repairing broken water and irrigation pipes has been made a lot simpler by the use of a Flo-Span coupling, also known as a telescoping coupling or an expansion repair coupling. In the past, repairing broken water lines and irrigation pipes required digging up several feet of the line in order to flex it enough to put a standard glue coupling in place, or you had to flex the pipe enough to slide a gasket repair coupling onto the pipe. Both of these required a lot more labor than using the Flo-Span coupling.

     With this device you just cut out the broken place, glue one end of the flow span coupling and then slide out the telescoping section and glue it into place. It’s a labor saving fitting that should be on every repair truck. If you have any questions or would like to see one of these fittings, please stop by one of our locations.





    Lee Canaday

    W.P. Law Inc. 

    When it rains, does your spinkler system still run?

    - Friday, May 20, 2011
    When it rains, does your sprinkler still run?

    You’ve all seen the ads showing how many gallons of water are wasted when your faucet drips or toilet leaks – 30 to 100 gallons per day.  This is truly wasteful and can be expensive, but it is nothing when compared to running your sprinkler system when it is not needed.

    Let’s assume your yard is irrigated with 16 rotors.  If each rotor uses 4 gallons per minute and is run for one hour per day, 3840 gallons of water are sprayed each time the system runs and 3840 gallons are wasted each time the system runs while it is raining.  At $3.45 per one thousand gallons (a local rate), that would be $13.25 literally being poured down the drain.

    Installation of an inexpensive wireless or analog rain sensor can solve the problem, or, better yet, update your old style controller to a very reasonably priced ‘smart’ controller and weather station combination which can automatically adjust run times to match current temperature and recent rain and watering conditions.

    Plumbing leaks can be fixed cheaply and by the do-it-yourselfer.  So can a sprinkler system that doesn’t run when it should.  Or an expert can be called in (a plumber, or an irrigation contractor, respectively) and is well worth money over the long run.

    Don’t water when it’s raining.  It’s not the green thing to do!!

    Replacement Irrigation or Sprinkler Pumps for Submersibles on Lake Hartwell

    - Wednesday, March 30, 2011

    Earlier this month the U.S. Army Corps or Engineers announced that submersible pumps on Lake Hartwell used for irrigation or domestic use will be banned.  This announcement stems from a near electrocution of a swimmer last year.  As the spring season starts off, many property owners on Lake Hartwell will need to replace their existing submersible pumps to be in compliance with the new ruling in order to use the lake to supply water to their sprinkler systems.

    Lake Hartwell property owners will want to use a centrifugal style pump to replace their existing submersible pumps.  Centrifugal pumps are considered safer because the electrical portion of the pump does not come in contact with water.  This style of pump sits above the shore line and draws water up out of the lake.  Click below to see a typical centrifugal pump setup used for irrigation. 

    Typical Centrifugal Pump Setup

    When Lake Hartwell property owners are searching for a replacement irrigation or sprinkler pump, they should be aware that not all pumps are created equally.  Centrifugal pumps are available in varying horsepower and can have single or multiple impellers.  Centrifugal pumps with the same horsepower can differ greatly depending on the manufacturer.  When sizing an irrigation pump, several factors are important to take into consideration such as elevation, flow rate, and size and type of components used in the irrigation system.  Use the pump sizing calculator below to enter information on your sprinkler system to find out which type of centrifugal pump will deliver the necessary performance to help maximize your irrigation system. 

    Pump Sizing Calculator

    Submersible pumps are very effective for pushing water and supplying the necessary flow and pressure needed for irrigation systems.  Centrifugal pumps differ in that they draw water out of the lake.  Centrifugal pumps should be located as close to the lake as possible without intruding onto the U.S. Army Corps of Engineers property.  If sized properly, centrifugal pumps can be as effective as submersibles, but individuals should aware that performance can vary between manufacturers.     

    Homeowners on Lake Hartwell should be aware that not all pumps deliver the necessary performance their irrigation or sprinkler systems will need.  Many of the big box stores sell pumps that may seem attractive but fall short from delivering adequate pressure and flow needed for sprinklers.  The professionals at W.P. Law Inc. can assist individuals in making the right pump selection to meet their irrigation needs.     

    Designing Irrigation Systems...Planning Ahead

    Cameron Huntley - Monday, December 13, 2010
    Designing Irrigation Systems…Planning Ahead

    When the decision is made to add an irrigation system to your landscape or farm, there is no doubt that it pays to have an irrigation design done.  Having a complete irrigation design will maximize the effectiveness of the irrigation system, providing cost savings over the “buy-it-and-try-it” method, which usually leads to malfunctions and re-workings. While most would-be irrigation system owners would admit the need for an irrigation design, it is surprising how few take the time to plan-ahead.  When the design process is delayed until the last minute, the procrastination could lead to inflated costs when compared to the same irrigation system planned in advance.

    By planning ahead, you are able to take advantage of several money saving opportunities.  We can make sure that all necessary parts for the irrigation system are in stock for the complete job, often eliminating freight charges that show up when trying to obtain parts at the last-minute.  Additionally, we can pair jobs together, allowing us to obtain better pricing for you on the larger quantities.  You can see additional cost-savings if an estimate is obtained ahead of time, as we can avoid some price increases by having a prior quote honored.  

    In addition to the cost-savings, we will all obtain a greater peace of mind by having more time to work out the details of a particular job.  Just like fingerprints, no two systems are identical.  As more information is taken into consideration, we can fine-tune and personalize any given irrigation design to meet your specific needs.

    Irrigation System Winter Wonderland

    - Tuesday, December 07, 2010

    Irrigation System Winter Wonderland

     

    John Boazman


    It’s that time of the year again when we all start to getting ready for the holidays.  In South Carolina we don’t get much frozen precipitation that makes for the perfect post card picture commonly associated with this time of the year.  For that reason, many people must feel the need to keep their automatic irrigation systems turned on during freezing conditions. 

    As an irrigation designer and distributor, I often get the question “How do I keep my automatic irrigation system from running and laying a sheet of ice on the sidewalk and street during freezing weather?”

    This is a very common problem throughout the country. I live in a warmer part of South Carolina, but this morning temperatures were in the teen as I made my way to work. Along the way, I encountered four irrigation ice patches on the road. The culprit of these icy patches stemmed from sprinklers throwing onto the highway during freezing temperatures. These irrigation ice patches ranged from a few feet into the first lane to a 20 foot section running across four lanes of traffic.  I also noticed another irrigation system spraying across a sidewalk and into the road near a school.

    So many questions come to mind when I see irrigation ice. How can these property owners and managers be so uncaring about the danger they are causing to others? Why doesn’t our state and county safety divisions enact laws and serve fines for these public hazards? Aren’t these people concerned about law suits from accident victims?

    As an irrigation designer and distributor, I can’t believe these people are so willing to buy potable water just to throw it into the highway. Ok, so they don’t care about anybody else or our environment, surely they care about they own wallets. First and foremost they need to adjust or move their sprinklers.  They’ll never need to grow anything in the highway and water on the road is a hazard in any weather. I did see one area that the sprinklers did not throw into the road, but because they were operating at too much pressure, a light mist was drifting onto the road causing a thin layer of ice.

    After your sprinklers are properly adjusted and your pressure regulated, there are easy preventative measures you can take to eliminate irrigation ice. There are simple add on devices known as rain and freeze sensors that can be added to your irrigation controller.  These simple devices will turn off your irrigation during freezing conditions or during a rainfall event. When temperatures fall below 37° F, freeze sensors will prevent the irrigation controller from turning on any valves.  Rain sensors work in the same way and prevent irrigation systems from running once a predetermined amount of rainfall is recorded.  These types of sensors save money and limit possible lawsuits from irrigation ice causing unwanted accidents. 

    Every automatic irrigation system should have a combination rain and freeze sensor for the reasons mentioned above.  Another way to conserve irrigation water and limit unnecessary watering is by using a smart irrigation controller.  These types of irrigation controllers use weather stations and soil moisture sensors to apply the proper amount of water to your landscape.  Typical water savings are between 20-50%.  These types of irrigation controllers include a rain and freeze sensor, but also determine how much water needs to be applied to the landscape.  Because they are “smart” irrigation controllers,  they receive feedback from either a weather station or soil moisture sensor.

    These types of irrigation controllers save time, money and water by only applying water when needed.  Click below to learn more about various components available to make your irrigation system smarter.

    Do I Need to Water my Grass in the Winter Months?

    - Tuesday, November 30, 2010

    Logic tells us that as cooler weather sets in during the winter, grasses require far less water than during the summer months.  The amount of water lost through evaporation and transpiration slows considerably and the growth rate of grasses slows down as well.  In South Carolina warm-season grasses such as St. Augustine, Zoysia, Bermuda, and Centipede go into a dormant stage as temperatures begin to lower.  Although these warm-season grasses turn brown and appear to be dead, they are very much still alive and await warmer temperatures in the spring to begin new growth.  

    Since these grasses are still alive yet dormant, the question becomes "Do I need to water my lawn during the winter months?"  The answer is a definate "Maybe".  Irrigation during the winter months in South Carolina will not need to occur often, but there are times when supplemental water will help warm-season grasses such as  St. Augustine, Zoysia, Bermuda, and Centipede survive the winter.  During times of low humidity and windy conditions in the winter months, grasses are prone to drying out.  If warm-season grasses dry out too much, they may be vulnerable to quick drops in temperature that may lead to a condition called winter kill.  

    Due to constantly changing weather conditions in the Southeast, scheduling irrigation during the winter months is almost impossible.  To help better predict when to irrigate, new irrigation controllers known as "smart controllers" are helping individuals make informed decisions on when to irrigate.  Smart controllers utilize weather stations or soil moisture sensors to determine when and how long to run irrigation cycles.  These newest irrigation controllers take the guess work out of scheduling irrigation cycles.  

    Soil moisture sensors are extremly accurature in reading how moist or dry your lawn is.  If the soil drys out to the point where it needs to be water, the sensor relays that information back to the irrgation controller to allow it to water the lawn.  Some smart controllers use small weather stations that take recordings of the conditions around them to allow irrigation cycles to run when needed.  

    These newest irrigation controllers can save time and money by not wasting water and having to continually change run times due to changes in the weather.  Many users have saved 20-50% of their irrigation water bill by using smart irrigation controllers that utilize soil moisture sensors or weather stations.  These types of irrigation controllers keep landscapes healthier by only applying water when it is needed and by applying the proper amount.  The good news is that they can pay for themselves in as little as one season due to their water saving features.

    There may be times when your lawn needs irrigation during the winter months.  It won't be very often, but if it does need water, smart irrigation controllers can make informed decisions on when to irrigate and how much water to apply.  To learn more about the different smart irrigation controllers offered by W.P. Law Inc., check out the links below for specific product information.  Save time, money, and water with smart irrigation controllers. 

      Acclima SC6 and SC12
      Acclima SC6+ and SC12+

      Weathermatic SL800
      Weathermatic SL1600
      Weathermatic SLW10
      Weathermatic SLW15

      Rainbird ESP-SMT  


    Find A Location Near You!

    MAIN OFFICE - LEXINGTON

    303 Riverchase Way
    Lexington, SC 29072

    Phone 803-461 -0599
    Toll-Free 800-476-4515
    Fax 803-461 -0598
    Contact Us

     

    MONDAY - FRIDAY
    8:00am - 5:00pm 

    Need Directions?

    CHARLESTON

    3636 Belvedere Rd.
    John's Island, SC 29455

    Phone 843-559-3945
    Fax 843-559-2740
    Contact Us

     

    MONDAY - FRIDAY ONLY
    8:00 am - 5:00 pm

     

    Need Directions?

    GREENVILLE

    1330 Grove Rd.
    Greenville, SC 29605

    Phone 864-295-3810
    800-660-7569
    Fax 864-295-6990
    Contact Us

     

    MONDAY - FRIDAY
    8:00am - 5:00pm

     

    Need Directions?

    GREER

    2400 Highway 101 S.
    Greer, SC 29651

    Phone 864-879-1045
    877-835-0714
    Fax 864-879-1 046
    Contact Us

     

    MONDAY - FRIDAY
    7:30am - 5:00pm

     

    Need Directions?